dpkg(1)
NAME
dpkg - package manager for Debian
SYNOPSIS
dpkg [options] action
WARNING
This manual is intended for users wishing to understand dpkg's command
line options and package states in more detail than that provided by
dpkg --help.
It should not be used by package maintainers wishing to understand how
dpkg will install their packages. The descriptions of what dpkg does
when installing and removing packages are particularly inadequate.
DESCRIPTION
dpkg is a tool to install, build, remove and manage Debian packages.
The primary and more user-friendly front-end for dpkg is aptitude(1).
dpkg itself is controlled entirely via command line parameters, which
consist of exactly one action and zero or more options. The actionparameter tells dpkg what to do and options control the behavior of the
action in some way.
- dpkg can also be used as a front-end to dpkg-deb(1). The following are
dpkg-deb actions, and if they are encountered, dpkg just runs dpkg-deb
with the parameters given to it:
- -b, --build,
-c, --contents,
-I, --info,
-f, --field,
-e, --control,
-x, --extract,
-X, --vextract, and
--fsys-tarfile. - Please refer to dpkg-deb(1) for information about these actions.
INFORMATION ABOUT PACKAGES
- dpkg maintains some usable information about available packages. The information is divided in three classes: states, selection states and flags. These values are intended to be changed mainly with dselect.
- PACKAGE STATES
- not-installed
The package is not installed on your system.
- config-files
Only the configuration files of the package exist on the system.
- half-installed
The installation of the package has been started, but not completed for some reason.
- unpacked
The package is unpacked, but not configured.
- half-configured
The package is unpacked and configuration has been started, but not yet completed for some reason.
- triggers-awaited
The package awaits trigger processing by another package.
- triggers-pending
The package has been triggered.
- installed
The package is unpacked and configured OK.
- PACKAGE SELECTION STATES
- install
The package is selected for installation.
- hold A package marked to be on hold is not handled by dpkg, unless
forced to do that with option --force-hold.
- deinstall
The package is selected for deinstallation (i.e. we want to remove all files, except configuration files).
- purge The package is selected to be purged (i.e. we want to remove
everything, even configuration files).
- PACKAGE FLAGS
- reinst-required
A package marked reinst-required is broken and requires reinstallation. These packages cannot be removed, unless forced with option --force-remove-reinstreq.
ACTIONS
- -i, --install package_file...
- Install the package. If --recursive or -R option is specified, package_file must refer to a directory instead.
- Installation consists of the following steps:
- 1. Extract the control files of the new package.
- 2. If another version of the same package was installed before the new installation, execute prerm script of the old package.
- 3. Run preinst script, if provided by the package.
- 4. Unpack the new files, and at the same time back up the old files, so that if something goes wrong, they can be restored.
- 5. If another version of the same package was installed before the new installation, execute the postrm script of the old package. Note that this script is executed after the preinst script of the new package, because new files are written at the same time old files are removed.
- 6. Configure the package. See --configure for detailed information about how this is done.
- --unpack package_file...
- Unpack the package, but don't configure it. If --recursive or -R option is specified, package_file must refer to a directory instead.
- --configure package...|-a|--pending
- Configure a package which has been unpacked but not yet configured. If -a or --pending is given instead of package, all unpacked but unconfigured packages are configured.
- To reconfigure a package which has already been configured, try the dpkg-reconfigure(8) command instead.
- Configuring consists of the following steps:
- 1. Unpack the conffiles, and at the same time back up the old conffiles, so that they can be restored if something goes wrong.
- 2. Run postinst script, if provided by the package.
- --triggers-only package...|-a|--pending
- Processes only triggers. All pending triggers will be processed. If package names are supplied only those packages' triggers will be processed, exactly once each where necessary. Use of this option may leave packages in the improper triggers-awaited and triggers-pending states. This can be fixed later by running: dpkg --configure --pending.
- -r, --remove, -P, --purge package...|-a|--pending
- Remove an installed package. -r or --remove remove everything except conffiles. This may avoid having to reconfigure the package if it is reinstalled later. (Conffiles are configuration files that are listed in the DEBIAN/conffiles control file). -P or --purge removes everything, including conffiles. If -a or --pending is given instead of a package name, then all packages unpacked, but marked to be removed or purged in file /var/lib/dpkg/status, are removed or purged, respectively. Note: some configuration files might be unknown to dpkg because they are created and handled separately through the configuration scripts. In that case, dpkg won't remove them by itself, but the package's postrm script (which is called by dpkg), has to take care of their removal during purge.
- Removing of a package consists of the following steps:
- 1. Run prerm script
- 2. Remove the installed files
- 3. Run postrm script
- --update-avail, --merge-avail Packages-file
- Update dpkg's and dselect's idea of which packages are available. With action --merge-avail, old information is combined with information from Packages-file. With action --update-avail, old information is replaced with the information in the Packages-file. The Packages-file distributed with Debian is simply named Packages. dpkg keeps its record of available packages in /var/lib/dpkg/available.
- A simpler one-shot command to retrieve and update the available file is dselect update. Note that this file is mostly useless if you don't use dselect but an APT-based frontend: APT has its own system to keep track of available packages.
- -A, --record-avail package_file...
- Update dpkg and dselect's idea of which packages are available with information from the package package_file. If --recursive or -R option is specified, package_file must refer to a directory instead.
- --forget-old-unavail
- Now obsolete and a no-op as dpkg will automatically forget uninstalled unavailable packages.
- --clear-avail
- Erase the existing information about what packages are available.
- -C, --audit
- Searches for packages that have been installed only partially on your system. dpkg will suggest what to do with them to get them working.
- --get-selections [package-name-pattern...]
- Get list of package selections, and write it to stdout. Without a pattern, non-installed packages (i.e. those which have been previously purged) will not be shown.
- --set-selections
- Set package selections using file read from stdin. This file should be in the format '<package> <state>', where state is one of install, hold, deinstall or purge. Blank lines and comment lines beginning with '#' are also permitted.
- --clear-selections
- Set the requested state of every non-essential package to deinstall. This is intended to be used immediately before --set-selections, to deinstall any packages not in list given to --set-selections.
- --yet-to-unpack
- Searches for packages selected for installation, but which for some reason still haven't been installed.
- --print-architecture
- Print architecture of packages dpkg installs (for example, "i386").
- --compare-versions ver1 op ver2
- Compare version numbers, where op is a binary operator.
dpkg returns success (zero result) if the specified condition is satisfied, and failure (nonzero result) otherwise. There are two groups of operators, which differ in
how they treat an empty ver1 or ver2. These treat an empty version as earlier than any version: lt le eq ne ge gt. These treat an empty version as later than any version: lt-nl le-nl ge-nl gt-nl. These are provided only for compatibility with control file syntax: < << <= = >= >> >. - --command-fd <n>
- Accept a series of commands on input file descriptor <n>.
Note: additional options set on the command line, and
through this file descriptor, are not reset for subsequent commands executed during the same run. - --help Display a brief help message.
- --force-help
- Give help about the --force-thing options.
- -Dh, --debug=help
- Give help about debugging options.
- --version
- Display dpkg version information.
- dpkg-deb actions
- See dpkg-deb(1) for more information about the following actions.
- -b, --build directory [archive|directory]
Build a deb package.
- -c, --contents archive
List contents of a deb package.
- -e, --control filename [directory]
Extract control-information from a package.
- -x, --extract archive directory
Extract the files contained by package.
- -X, --vextract archive directory
Extract and display the filenames contained by a
package. - -f, --field archive [control-field...]
Display control field(s) of a package.
- --fsys-tarfile archive
Display the filesystem tar-file contained by a
Debian package. - -I, --info archive [control-file...]
Show information about a package.
- dpkg-query actions
- See dpkg-query(1) for more information about the following actions.
- -l, --list package-name-pattern...
List packages matching given pattern.
- -s, --status package-name...
Report status of specified package.
- -L, --listfiles package-name...
List files installed to your system from package-name.
- -S, --search filename-search-pattern...
Search for a filename from installed packages.
- -p, --print-avail package-name...
Display details about package-name, as found in /var/lib/dpkg/available. Users of APT-based frontends should use apt-cache show package-name instead.
OPTIONS
All options can be specified both on the command line and in the
dpkg configuration file /etc/dpkg/dpkg.cfg or the files on the
configuration directory /etc/dpkg/dpkg.cfg.d/. Each line in the
configuration file is either an option (exactly the same as the
command line option but without leading dashes) or a comment (if
it starts with a #).
- --abort-after=number
- Change after how many errors dpkg will abort. The default is 50.
- -B, --auto-deconfigure
- When a package is removed, there is a possibility that
another installed package depended on the removed package. Specifying this option will cause automatic deconfiguration of the package which depended on the removed
package. - -Doctal, --debug=octal
- Switch debugging on. octal is formed by bitwise-orring
desired values together from the list below (note that
these values may change in future releases). -Dh or --debug=help display these debugging values.
number description1 Generally helpful progress information
2 Invocation and status of maintainer scripts10 Output for each file processed - 100 Lots of output for each file processed
20 Output for each configuration file
- 200 Lots of output for each configuration file
40 Dependencies and conflicts
- 400 Lots of dependencies/conflicts output
- 10000 Trigger activation and processing
20000 Lots of output regarding triggers
40000 Silly amounts of output regarding triggers - 1000 Lots of drivel about e.g. the dpkg/info dir
2000 Insane amounts of drivel - --force-things, --no-force-things, --refuse-things
Force or refuse (no-force and refuse mean the same thing) to do some things. things is a comma separated list of things specified below. --force-help displays a message describing them. Things marked with (*) are forced by
default.- Warning: These options are mostly intended to be used by experts only. Using them without fully understanding their effects may break your whole system.
- all: Turns on (or off) all force options.
- downgrade(*): Install a package, even if newer version of it is already installed.
- Warning: At present dpkg does not do any dependency checking on downgrades and therefore will not warn you if the downgrade breaks the dependency of some other package. This can have serious side effects, downgrading essential system components can even make your whole system unusable. Use with care.
- configure-any: Configure also any unpacked but unconfigured packages on which the current package depends.
- hold: Process packages even when marked "hold".
- remove-reinstreq: Remove a package, even if it's broken
and marked to require reinstallation. This may, for example, cause parts of the package to remain on the system,
which will then be forgotten by dpkg. - remove-essential: Remove, even if the package is considered essential. Essential packages contain mostly very
basic Unix commands. Removing them might cause the whole
system to stop working, so use with caution. - depends: Turn all dependency problems into warnings.
- depends-version: Don't care about versions when checking dependencies.
- breaks: Install, even if this would break another package.
- conflicts: Install, even if it conflicts with another
package. This is dangerous, for it will usually cause
overwriting of some files. - confmiss: Always install a missing conffile. This is dangerous, since it means not preserving a change (removing)
made to the file. - confnew: If a conffile has been modified always install
the new version without prompting, unless the
--force-confdef is also specified, in which case the default action is preferred. - confold: If a conffile has been modified always keep the
old version without prompting, unless the --force-confdef
is also specified, in which case the default action is
preferred. - confdef: If a conffile has been modified always choose
the default action. If there is no default action it will
stop to ask the user unless --force-confnew or --force-confold is also been given, in which case it will use that to decide the final action. - confask: If a conffile has been modified always offer to
replace it with the version in the package, even if the
version in the package did not change. If any of
--force-confmiss, --force-confnew, --force-confold, or --force-confdef is also given, it will be used to decide the final action. - overwrite: Overwrite one package's file with another's file.
- overwrite-dir Overwrite one package's directory with another's file.
- overwrite-diverted: Overwrite a diverted file with an undiverted version.
- architecture: Process even packages with the wrong architecture.
- bad-path: PATH is missing important programs, so problems are likely.
- not-root: Try to (de)install things even when not root.
- bad-verify: Install a package even if it fails authenticity check.
- --ignore-depends=package,...
- Ignore dependency-checking for specified packages (actually, checking is performed, but only warnings about conflicts are given, nothing else).
- --new, --old
- Select new or old binary package format. This is a
dpkg-deb(1) option. - --nocheck
- Don't read or check contents of control file while building a package. This is a dpkg-deb(1) option.
- --no-act, --dry-run, --simulate
- Do everything which is supposed to be done, but don't
write any changes. This is used to see what would happen
with the specified action, without actually modifying
anything. - Be sure to give --no-act before the action-parameter, or you might end up with undesirable results. (e.g. dpkg --purge foo --no-act will first purge package foo and then try to purge package --no-act, even though you probably expected it to actually do nothing)
- -R, --recursive
- Recursively handle all regular files matching pattern
*.deb found at specified directories and all of its subdirectories. This can be used with -i, -A, --install, --unpack and --avail actions. - -G Don't install a package if a newer version of the same
- package is already installed. This is an alias of
--refuse-downgrade. - --admindir=dir
- Change default administrative directory, which contains
many files that give information about status of
installed or uninstalled packages, etc. (Defaults to
/var/lib/dpkg) - --instdir=dir
- Change default installation directory which refers to the
directory where packages are to be installed. instdir is also the directory passed to chroot(2) before running package's installation scripts, which means that the
scripts see instdir as a root directory. (Defaults to /) - --root=dir
- Changing root changes instdir to dir and admindir to dir/var/lib/dpkg.
- -O, --selected-only
- Only process the packages that are selected for installation. The actual marking is done with dselect or by dpkg,
when it handles packages. For example, when a package is
removed, it will be marked selected for deinstallation. - -E, --skip-same-version
- Don't install the package if the same version of the
package is already installed. - --pre-invoke=command
--post-invoke=command - Set an invoke hook command to be run via "sh -c" before
or after the dpkg run for the unpack, configure, install,
triggers-only, remove and purge dpkg actions. This option
can be specified multiple times. The order the options
are specified is preserved, with the ones from the configuration files taking precedence. The environment
variable DPKG_HOOK_ACTION is set for the hooks to the current dpkg action. Note: front-ends might call dpkg
several times per invocation, which might run the hooks
more times than expected. - --path-exclude=glob-pattern --path-include=glob-pattern
- Set glob-pattern as a path filter, either by excluding or re-including previously excluded paths matching the specified patterns during install.
- Warning: take into account that depending on the excluded paths you might completely break your system, use with caution.
- The glob patterns use the same wildcards used in the
shell, were '*' matches any sequence of characters,
including the empty string and also '/'. For example,
'/usr/*/READ*' matches '/usr/share/doc/package/README'. As usual, '?' matches any single character (again,
including '/'). And '[' starts a character class, which
can contain a list of characters, ranges and complementations. See glob(7) for detailed information about globbing. Note: the current implementation might re-include
more directories and symlinks than needed, to be on the
safe side and avoid possible unpack failures, future work
might fix this. - This can be used to remove all paths except some particular ones; a typical case is:
- --path-exclude=/usr/share/doc/* --path-include=/usr/share/doc/*/copyright
- to remove all documentation files except the copyright
files. - These two options can be specified multiple times, and
interleaved with each other. Both are processed in the
given order, with the last rule that matches a file name
making the decision. - --status-fd n
- Send machine-readable package status and progress information to file descriptor n. This option can be specified
multiple times. The information is generally one record
per line, in one of the following forms: - status: package: status
Package status changed; status is as in the status file.
- status: package : error : extended-error-message
An error occurred. Unfortunately at the time of
writing extended-error-message can contain newlines, although in locales where the translators
have not made mistakes every newline is followed
by at least one space. - status: file : conffile-prompt : 'real-old' 'real-new'
useredited distedited
User is being asked a conffile question.
- processing: stage: package
Sent just before a processing stage starts. stage is one of upgrade, install (both sent before unpacking), configure, trigproc, disappear, remove, purge.
- --log=filename
- Log status change updates and actions to filename,
instead of the default /var/log/dpkg.log. If this option
is given multiple times, the last filename is used. Log
messages are of the form `YYYY-MM-DD HH:MM:SS status
<state> <pkg> <installed-version>' for status change
updates; `YYYY-MM-DD HH:MM:SS <action> <pkg> <installedversion> <available-version>' for actions where <action> is one of install, upgrade, remove, purge; and `YYYY-MMDD HH:MM:SS conffile <filename> <decision>' for conffile
changes where <decision> is either install or keep. - --no-debsig
- Do not try to verify package signatures.
- --no-triggers
- Do not run any triggers in this run (activations will
still be recorded). If used with --configure package or --triggers-only package then the named package postinst will still be run even if only a triggers run is needed.
Use of this option may leave packages in the improper
triggers-awaited and triggers-pending states. This can be fixed later by running: dpkg --configure --pending. - --triggers
- Cancels a previous --no-triggers.
FILES
- /etc/dpkg/dpkg.cfg
- Configuration file with default options.
- /var/log/dpkg.log
- Default log file (see /etc/dpkg/dpkg.cfg(5) and option --log).
- The other files listed below are in their default directories,
see option --admindir to see how to change locations of these files. - /var/lib/dpkg/available
- List of available packages.
- /var/lib/dpkg/status
- Statuses of available packages. This file contains information about whether a package is marked for removing or
not, whether it is installed or not, etc. See section
INFORMATION ABOUT PACKAGES for more info. - The status file is backed up daily in /var/backups. It can be useful if it's lost or corrupted due to filesystems troubles.
- The following files are components of a binary package. See
deb(5) for more information about them: - control
- conffiles
- preinst
- postinst
- prerm
- postrm
ENVIRONMENT
- HOME If set, dpkg will use it as the directory from which to
- read the user specific configuration file.
- TMPDIR If set, dpkg will use it as the directory in which to
- create temporary files and directories.
- PAGER The program dpkg will execute when displaying the conf
- files.
- SHELL The program dpkg will execute when starting a new shell.
- COLUMNS
- Sets the number of columns dpkg should use when displaying formatted text. Currently only used by -l.
- DPKG_SHELL_REASON
- Defined by dpkg on the shell spawned on the conffile
prompt to examine the situation. Current valid value:
conffile-prompt. - DPKG_CONFFILE_OLD
- Defined by dpkg on the shell spawned on the conffile
prompt to examine the situation. Contains the path to the
old conffile. - DPKG_CONFFILE_NEW
- Defined by dpkg on the shell spawned on the conffile
prompt to examine the situation. Contains the path to the
new conffile. - DPKG_RUNNING_VERSION
- Defined by dpkg on the maintainer script environment to the version of the currently running dpkg instance.
- DPKG_MAINTSCRIPT_PACKAGE
- Defined by dpkg on the maintainer script environment to the package name being handled.
- DPKG_MAINTSCRIPT_ARCH
- Defined by dpkg on the maintainer script environment to the architecture the package got built for.
- DPKG_MAINTSCRIPT_NAME
- Defined by dpkg on the maintainer script environment to
the name of the script running (preinst, postinst, prerm,
postrm).
EXAMPLES
- To list packages related to the editor vi(1):
- dpkg -l '*vi*'
- To see the entries in /var/lib/dpkg/available of two packages:
- dpkg --print-avail elvis vim | less
- To search the listing of packages yourself:
- less /var/lib/dpkg/available
- To remove an installed elvis package:
- dpkg -r elvis
- To install a package, you first need to find it in an archive or
CDROM. The "available" file shows that the vim package is in
section "editors": - cd /cdrom/pool/main/v/vim dpkg -i vim_4.5-3.deb
- To make a local copy of the package selection states:
- dpkg --get-selections >myselections
- You might transfer this file to another computer, and install it
there with: - dpkg --clear-selections dpkg --set-selections <myselections
- Note that this will not actually install or remove anything, but
just set the selection state on the requested packages. You will
need some other application to actually download and install the
requested packages. For example, run apt-get dselect-upgrade. - Ordinarily, you will find that dselect(1) provides a more convenient way to modify the package selection states.
ADDITIONAL FUNCTIONALITY
Additional functionality can be gained by installing any of the
following packages: apt, aptitude and debsums.
SEE ALSO
aptitude(1), apt(1), dselect(1), dpkg-deb(1), dpkg-query(1), deb(5), deb-control(5), dpkg.cfg(5), and dpkg-reconfigure(8).
BUGS
--no-act usually gives less information than might be helpful.
AUTHORS
- See /usr/share/doc/dpkg/THANKS for the list of people who have
contributed to dpkg.