GIT-PULL(1)

NAME

git-pull - Fetch from and merge with another repository or a local
branch

SYNOPSIS

git pull <options> <repository> <refspec>...

DESCRIPTION

Runs git fetch with the given parameters, and calls git merge to merge the retrieved head(s) into the current branch. With --rebase, calls git rebase instead of git merge.

Note that you can use . (current directory) as the <repository> to pull from the local repository -- this is useful when merging local branches into the current branch.

Also note that options meant for git pull itself and underlying git merge must be given before the options meant for git fetch.

Warning: Running git pull (actually, the underlying git merge) with uncommitted changes is discouraged: while possible, it leaves you in a state that is hard to back out of in the case of a conflict.

OPTIONS

-q, --quiet: This is passed to both underlying git-fetch to squelch reporting of during transfer, and underlying git-merge to squelch output during merging.
-v, --verbose: Pass --verbose to git-fetch and git-merge.
Options related to merging: --commit, --no-commit
Perform the merge and commit the result. This option can be used to override --no-commit.

With --no-commit perform the merge but pretend the merge failed and do not autocommit, to give the user a chance to inspect and further tweak the merge result before committing.; --ff, --no-ff
Do not generate a merge commit if the merge resolved as a
fast-forward, only update the branch pointer. This is the default
behavior of git-merge.

With --no-ff Generate a merge commit even if the merge resolved as a fast-forward.; --log, --no-log
In addition to branch names, populate the log message with one-line descriptions from the actual commits that are being merged.

With --no-log do not list one-line descriptions from the actual
commits being merged.; --stat, -n, --no-stat
Show a diffstat at the end of the merge. The diffstat is also
controlled by the configuration option merge.stat.

With -n or --no-stat do not show a diffstat at the end of the
merge.; --squash, --no-squash
Produce the working tree and index state as if a real merge
happened (except for the merge information), but do not actually
make a commit or move the HEAD, nor record $GIT_DIR/MERGE_HEAD to
cause the next git commit command to create a merge commit. This
allows you to create a single commit on top of the current branch
whose effect is the same as merging another branch (or more in case of an octopus).

With --no-squash perform the merge and commit the result. This
option can be used to override --squash.; --ff-only
Refuse to merge and exit with a non-zero status unless the current HEAD is already up-to-date or the merge can be resolved as a
fast-forward.; -s <strategy>, --strategy=<strategy>
Use the given merge strategy; can be supplied more than once to
specify them in the order they should be tried. If there is no -s
option, a built-in list of strategies is used instead (git
merge-recursive when merging a single head, git merge-octopus otherwise).; -X <option>, --strategy-option=<option>
Pass merge strategy specific option through to the merge strategy.; --summary, --no-summary
Synonyms to --stat and --no-stat; these are deprecated and will be removed in the future.; -q, --quiet
Operate quietly.; -v, --verbose
Be verbose.; --rebase
Instead of a merge, perform a rebase after fetching. If there is a remote ref for the upstream branch, and this branch was rebased
since last fetched, the rebase uses that information to avoid
rebasing non-local changes. To make this the default for branch
<name>, set configuration branch.<name>.rebase to true.

Note
This is a potentially dangerous mode of operation. It rewrites history, which does not bode well when you published that
history already. Do not use this option unless you have read git-rebase(1) carefully.
--no-rebase: Override earlier --rebase.
Options related to fetching: --all
Fetch all remotes.; -a, --append
Append ref names and object names of fetched refs to the existing
contents of .git/FETCH_HEAD. Without this option old data in
.git/FETCH_HEAD will be overwritten.; --depth=<depth>
Deepen the history of a shallow repository created by git clone with --depth=<depth> option (see git-clone(1)) by the specified number of commits.; -f, --force
When git fetch is used with <rbranch>:<lbranch> refspec, it refuses to update the local branch <lbranch> unless the remote branch
<rbranch> it fetches is a descendant of <lbranch>. This option
overrides that check.; -k, --keep
Keep downloaded pack.; --no-tags
By default, tags that point at objects that are downloaded from the remote repository are fetched and stored locally. This option
disables this automatic tag following.; -t, --tags
Most of the tags are fetched automatically as branch heads are
downloaded, but tags that do not point at objects reachable from
the branch heads that are being tracked will not be fetched by this mechanism. This flag lets all tags and their associated objects be downloaded.; -u, --update-head-ok
By default git fetch refuses to update the head which corresponds to the current branch. This flag disables the check. This is purely for the internal use for git pull to communicate with git fetch, and unless you are implementing your own Porcelain you are not
supposed to use it.; --upload-pack <upload-pack>
When given, and the repository to fetch from is handled by git fetch-pack, --exec=<upload-pack> is passed to the command to specify non-default path for the command run on the other end.; --progress
Progress status is reported on the standard error stream by default when it is attached to a terminal, unless -q is specified. This
flag forces progress status even if the standard error stream is
not directed to a terminal.; <repository>
The "remote" repository that is the source of a fetch or pull
operation. This parameter can be either a URL (see the section GIT URLS below) or the name of a remote (see the section REMOTES
below).; <refspec>
The format of a <refspec> parameter is an optional plus +, followed by the source ref <src>, followed by a colon :, followed by the
destination ref <dst>.

The remote ref that matches <src> is fetched, and if <dst> is not
empty string, the local ref that matches it is fast-forwarded using <src>. If the optional plus + is used, the local ref is updated
even if it does not result in a fast-forward update.

Note
If the remote branch from which you want to pull is modified in non-linear ways such as being rewound and rebased frequently,
then a pull will attempt a merge with an older version of
itself, likely conflict, and fail. It is under these conditions that you would want to use the + sign to indicate
non-fast-forward updates will be needed. There is currently no easy way to determine or declare that a branch will be made
available in a repository with this behavior; the pulling user simply must know this is the expected usage pattern for a
branch.

Note
You never do your own development on branches that appear on
the right hand side of a <refspec> colon on Pull: lines; they
are to be updated by git fetch. If you intend to do development derived from a remote branch B, have a Pull: line to track it
(i.e. Pull: B:remote-B), and have a separate branch my-B to do your development on top of it. The latter is created by git
branch my-B remote-B (or its equivalent git checkout -b my-B
remote-B). Run git fetch to keep track of the progress of the
remote side, and when you see something new on the remote
branch, merge it into your development branch with git pull .
remote-B, while you are on my-B branch.

Note
There is a difference between listing multiple <refspec>
directly on git pull command line and having multiple Pull: <refspec> lines for a <repository> and running git pull command without any explicit <refspec> parameters. <refspec> listed
explicitly on the command line are always merged into the
current branch after fetching. In other words, if you list more than one remote refs, you would be making an Octopus. While git pull run without any explicit <refspec> parameter takes default <refspec>s from Pull: lines, it merges only the first <refspec> found into the current branch, after fetching all the remote
refs. This is because making an Octopus from remote refs is
rarely done, while keeping track of multiple remote heads in
one-go by fetching more than one is often useful.

Some short-cut notations are also supported.

o tag <tag> means the same as refs/tags/<tag>:refs/tags/<tag>;

it requests fetching everything up to the given tag.

o A parameter <ref> without a colon is equivalent to <ref>: when

pulling/fetching, so it merges <ref> into the current branch
without storing the remote branch anywhere locally

GIT URLS

In general, URLs contain information about the transport protocol, the address of the remote server, and the path to the repository. Depending on the transport protocol, some of this information may be absent.

Git natively supports ssh, git, http, https, ftp, ftps, and rsync
protocols. The following syntaxes may be used with them:

o ssh://[user@]host.xz[:port]/path/to/repo.git/

o git://host.xz[:port]/path/to/repo.git/

o http[s]://host.xz[:port]/path/to/repo.git/

o ftp[s]://host.xz[:port]/path/to/repo.git/

o rsync://host.xz/path/to/repo.git/

An alternative scp-like syntax may also be used with the ssh protocol:

o [user@]host.xz:path/to/repo.git/

The ssh and git protocols additionally support ~username expansion:

o ssh://[user@]host.xz[:port]/~[user]/path/to/repo.git/

o git://host.xz[:port]/~[user]/path/to/repo.git/

o [user@]host.xz:/~[user]/path/to/repo.git/

For local respositories, also supported by git natively, the following syntaxes may be used:

o /path/to/repo.git/

o file:///path/to/repo.git/

These two syntaxes are mostly equivalent, except when cloning, when the former implies --local option. See git-clone(1) for details.

When git doesn't know how to handle a certain transport protocol, it
attempts to use the remote-<transport> remote helper, if one exists. To explicitly request a remote helper, the following syntax may be used:

o <transport>::<address>

where <address> may be a path, a server and path, or an arbitrary
URL-like string recognized by the specific remote helper being invoked. See git-remote-helpers(1) for details.

If there are a large number of similarly-named remote repositories and you want to use a different format for them (such that the URLs you use will be rewritten into URLs that work), you can create a configuration section of the form:: [url "<actual url base>"]
insteadOf = <other url base>
For example, with this:: [url "git://git.host.xz/"]
insteadOf = host.xz:/path/to/
insteadOf = work:
a URL like "work:repo.git" or like "host.xz:/path/to/repo.git" will be rewritten in any context that takes a URL to be "git://git.host.xz/repo.git".
If you want to rewrite URLs for push only, you can create a configuration section of the form:: [url "<actual url base>"]
pushInsteadOf = <other url base>
For example, with this:: [url "ssh://example.org/"]
pushInsteadOf = git://example.org/
a URL like "git://example.org/path/to/repo.git" will be rewritten to "ssh://example.org/path/to/repo.git" for pushes, but pulls will still use the original URL.

REMOTES

The name of one of the following can be used instead of a URL as
<repository> argument:

o a remote in the git configuration file: $GIT_DIR/config,

o a file in the $GIT_DIR/remotes directory, or

o a file in the $GIT_DIR/branches directory.

All of these also allow you to omit the refspec from the command line
because they each contain a refspec which git will use by default.
Named remote in configuration file: You can choose to provide the name of a remote which you had previously configured using git-remote(1), git-config(1) or even by a manual edit to the $GIT_DIR/config file. The URL of this remote will be used to
access the repository. The refspec of this remote will be used by
default when you do not provide a refspec on the command line. The
entry in the config file would appear like this:

[remote "<name>"]
url = <url>
pushurl = <pushurl>
push = <refspec>
fetch = <refspec>
The <pushurl> is used for pushes only. It is optional and defaults to <url>.
Named file in $GIT_DIR/remotes: You can choose to provide the name of a file in $GIT_DIR/remotes. The
URL in this file will be used to access the repository. The refspec in this file will be used as default when you do not provide a refspec on the command line. This file should have the following format:

URL: one of the above URL format
Push: <refspec>
Pull: <refspec>
Push: lines are used by git push and Pull: lines are used by git pull and git fetch. Multiple Push: and Pull: lines may be specified for additional branch mappings.
Named file in $GIT_DIR/branches: You can choose to provide the name of a file in $GIT_DIR/branches. The URL in this file will be used to access the repository. This file
should have the following format:

<url>#<head>
<url> is required; #<head> is optional.
Depending on the operation, git will use one of the following refspecs, if you don't provide one on the command line. <branch> is the name of this file in $GIT_DIR/branches and <head> defaults to master.
git fetch uses:: refs/heads/<head>:refs/heads/<branch>
git push uses:: HEAD:refs/heads/<head>

MERGE STRATEGIES

The merge mechanism (git-merge and git-pull commands) allows the backend merge strategies to be chosen with -s option. Some strategies can also take their own options, which can be passed by giving
-X<option> arguments to git-merge and/or git-pull.

resolve: This can only resolve two heads (i.e. the current branch and
another branch you pulled from) using a 3-way merge algorithm. It
tries to carefully detect criss-cross merge ambiguities and is
considered generally safe and fast.
recursive: This can only resolve two heads using a 3-way merge algorithm. When there is more than one common ancestor that can be used for 3-way
merge, it creates a merged tree of the common ancestors and uses
that as the reference tree for the 3-way merge. This has been
reported to result in fewer merge conflicts without causing
mis-merges by tests done on actual merge commits taken from Linux
2.6 kernel development history. Additionally this can detect and
handle merges involving renames. This is the default merge strategy when pulling or merging one branch.; The recursive strategy can take the following options:; ours
This option forces conflicting hunks to be auto-resolved
cleanly by favoring our version. Changes from the other tree that do not conflict with our side are reflected to the merge
result.

This should not be confused with the ours merge strategy, which does not even look at what the other tree contains at all. It
discards everything the other tree did, declaring our history contains all that happened in it.; theirs
This is opposite of ours.; subtree[=path]
This option is a more advanced form of subtree strategy, where the strategy makes a guess on how two trees must be shifted to match with each other when merging. Instead, the specified path is prefixed (or stripped from the beginning) to make the shape of two trees to match.
octopus: This resolves cases with more than two heads, but refuses to do a
complex merge that needs manual resolution. It is primarily meant
to be used for bundling topic branch heads together. This is the
default merge strategy when pulling or merging more than one
branch.
ours: This resolves any number of heads, but the resulting tree of the
merge is always that of the current branch head, effectively
ignoring all changes from all other branches. It is meant to be
used to supersede old development history of side branches. Note
that this is different from the -Xours option to the recursive merge strategy.
subtree: This is a modified recursive strategy. When merging trees A and B, if B corresponds to a subtree of A, B is first adjusted to match
the tree structure of A, instead of reading the trees at the same
level. This adjustment is also done to the common ancestor tree.

DEFAULT BEHAVIOUR

Often people use git pull without giving any parameter. Traditionally, this has been equivalent to saying git pull origin. However, when
configuration branch.<name>.remote is present while on branch <name>,
that value is used instead of origin.

In order to determine what URL to use to fetch from, the value of the
configuration remote.<origin>.url is consulted and if there is not any such variable, the value on URL: ` line in `$GIT_DIR/remotes/<origin>
file is used.

In order to determine what remote branches to fetch (and optionally store in the tracking branches) when the command is run without any refspec parameters on the command line, values of the configuration variable remote.<origin>.fetch are consulted, and if there aren't any, $GIT_DIR/remotes/<origin> file is consulted and its `Pull: ` lines are used. In addition to the refspec formats described in the OPTIONS section, you can have a globbing refspec that looks like this:: refs/heads/*:refs/remotes/origin/*
A globbing refspec must have a non-empty RHS (i.e. must store what were fetched in tracking branches), and its LHS and RHS must end with /*. The above specifies that all remote branches are tracked using tracking branches in refs/remotes/origin/ hierarchy under the same name.
The rule to determine which remote branch to merge after fetching is a bit involved, in order not to break backward compatibility.
If explicit refspecs were given on the command line of git pull, they are all merged.
When no refspec was given on the command line, then git pull uses the refspec from the configuration or $GIT_DIR/remotes/<origin>. In such cases, the following rules apply:: 1. If branch.<name>.merge configuration for the current branch <name> exists, that is the name of the branch at the remote site that is
merged.; 2. If the refspec is a globbing one, nothing is merged.; 3. Otherwise the remote branch of the first refspec is merged.

EXAMPLES

o Update the remote-tracking branches for the repository you cloned: from, then merge one of them into your current branch:

$ git pull, git pull origin; Normally the branch merged in is the HEAD of the remote repository, but the choice is determined by the branch.<name>.remote and
branch.<name>.merge options; see git-config(1) for details.
o Merge into the current branch the remote branch next:: $ git pull origin next
This leaves a copy of next temporarily in FETCH_HEAD, but does not update any remote-tracking branches. Using remote-tracking branches, the same can be done by invoking fetch and merge:: $ git fetch origin
$ git merge origin/next
If you tried a pull which resulted in a complex conflicts and would want to start over, you can recover with git reset.

AUTHOR

Written by Linus Torvalds <torvalds@osdl.org[1]> and Junio C Hamano <gitster@pobox.com[2]>

DOCUMENTATION

Documentation by Jon Loeliger, David Greaves, Junio C Hamano and the
git-list <git@vger.kernel.org[3]>.

GIT

Part of the git(1) suite

NOTES

1. torvalds@osdl.org: mailto:torvalds@osdl.org; 2. gitster@pobox.com
mailto:gitster@pobox.com; 3. git@vger.kernel.org
mailto:git@vger.kernel.org

docs.sk

comprehensive documentation repository

See also