LOOKUP(1)

NAME

lookup - interactive file search and display

SYNOPSIS

lookup [ args ] [ file ...  ]

DESCRIPTION

Lookup allows the quick interactive search of text files. It supports ASCII, JIS-ROMAN, and Japanese EUC Packed formated text, and has an integrated romajikana converter.

THIS MANUAL

Lookup is flexible for a variety of applications. This manual will, however, focus on the application of searching Jim Breen's edict (JapaneseEnglish dictionary) and kanjidic (kanji database). Being familiar with the content and format of these files would be helpful. See the INFO section near the end of this manual for information on how to obtain these files and their documentation.

OVERVIEW OF MAJOR FEATURES

The following just mentions some major features to whet your appetite to actually read the whole manual (-:

Romaji-to-Kana Converter: Lookup can convert romaji to kana for you, evenon the flyas you type.
Fuzzy Searching: Searches can be a bitvagueorfuzzy, so that you'll be able to findeven if you try to search for(the proper yomikata being).
Regular Expressions: Uses the powerful and expressive regular expression for searching. One can easily specify complex searches that affectI want lines that look like such-and-such, but not like this-and-that, but that also have this particular characteristic....
Wildcard ``Glob'' Patterns: Optionally, can use well-known filename wildcard patterns instead of full-fledged regular expressions.
Filters: You can have lookup not list certain lines that would otherwise match your search, yet can optionally save them for quick review. For example, you could have all name-only entries from edict filtered from normal output.
Automatic Modifications: Similarly, you can do a standard search-and-replace on lines just before they print, perhaps to remove information you don't care to see on most searches. For example, if you're generally not interested in kanjidic's info on Chinese readings, you can have them removed from lines before printing.
Smart Word-Preference Mode: You can have lookup list only entries with whole words that match your search (as opposed to an embedded match, such as findingtheinsidethem), but if no whole-word matches exist, will go ahead and list any entry that matches the search.
Handy Features: Other handy features include a dynamically settable and parameterized prompt, automatic highlighting of that part of the line that matches your search, an output pager, readline-like input with horizontal scrolling for long input lines, a.lookupstartup file, automated programability, and much more. Read on!

REGULAR EXPRESSIONS

Lookup makes liberal use of regular expressions (or regex for short) in controlling various aspects of the searches. If you are not familiar with the important concepts of regexes, read the tutorial appendix of this manual before continuing.

JAPANESE CHARACTER ENCODING METHODS

Internally, lookup works with Japanese packed-format EUC, and all files loaded must be encoded similarly. If you have files encoded in JIS or Shift-JIS, you must first convert them to EUC before loading (see the INFO section for programs that can do this).

Interactive input and output encoding, however, may be be selected via the -jis, -sjis, and -euc invocation flags (default is -euc), or by various commands to the program (described later).

Make sure to use the encoding appropriate for your system. If you're using kterm under the X Window System, you can use lookup's -jis flag to match kterm's default JIS encoding. Or, you might use kterm's-km eucstartup option (or menu selection) to put kterm into EUC mode. Also, I have found kterm's scrollbar (-sb -sl 500) to be quite useful.

With manyEnglishfonts in Japan, the character that normally prints as a backslash (halfwidth version of ) in The States appears as a yen symbol (the half-width version of ). How it will appear on your system is a function of what font you use and what output encoding method you choose, which may be different from the font and method that was used to print this manual (both of which may be different from what's printed on your keyboard's appropriate key). Make sure to keep this in mind while reading.

STARTUP

Let's assume that your copy of edict is in ~/lib/edict. You can start the program simply with: lookup ~/lib/edict
You'll note that lookup spends some time building an index before the defaultlookup> prompt appears.
Lookup gains much of its search speed by constructing an index of the file(s) to be searched. Since building the index can be time consuming itself, you can have lookup write the built index to a file that can be quickly loaded the next time you run the program. Index files will be given a.jin(Jeffrey's Index) ending.
Let's build the indices for edict and kanjidic now:: lookup -write ~/lib/edict ~/lib/kanjidic
This will create the index files: ~/lib/edict.jin
~/lib/kanjidic.jin
and exit.
You can now re-start lookup , automatically using the pre-computed index files as:: lookup ~/lib/edict ~/lib/kanjidic
You should then be presented with the prompt without having to wait for the index to be constructed (but see the section on Operating System concerns for possible reasons of delay).

INPUT

There are basically two types of input: searches and commands. Commands do such things as tell lookup to load more files or set flags. Searches report lines of a file that match some search specifier (where lines to search for are specified by one or more regular expressions).

The input syntax may perhaps at first seem odd, but has been designed to be powerful and concise. A bit of time invested to learn it well will pay off greatly when you need it.

BRIEF EXAMPLE

Assuming you've started lookup with edict and kanjidic as noted above, let's try a few searches. In these examples, the: search [edict]>
is the prompt. Note that the space after theAE>is part of the prompt.
Given the input:: search [edict]> tranquil
lookup will report all lines with the stringtranquilin them. There are currently about a dozen such lines, two of which look like:: [] /peaceful (an)/tranquil/calm/restful/
(R) [(R)] /peace/tranquility/
Notice that lines withtranquilandtranquilitymatched? This is becausetranquilwas embedded in the wordtranquility. You could restrict the search to only the wordtranquilby prepending the specialstart of wordsymbolAE<and appending the specialend of wordsymbolAE>to the regex, as in:: search [edict]> <tranquil>
This is the regular expression that saysthe beginning of a word, followed by aAEt,AEr, ...,AEl, which is at the end of a word.The current version of edict has just three matching entries.
Let's try another:: search [edict]> fukushima
This is a search for theEnglishfukushima -- ways to search for kana or kanji will be explored later. Note that among the several lines selected and printed are:: [] /Fukushima (pn,pl)/
3/4 [1/2] /Kisofukushima (pl)/
By default, searches are done in a case-insensitive manner --AEFandAEfare treated the same by lookup, at least so far as the matching goes. This is called case folding.
Let's give a command to turn this option off, so thatAEfandAEFwon't be considered the same. Here's an odd point about lookup's input syntax: the default setting is that all command lines must begin with a space. The space is the (default) command-introduction character and tells the input parser to expect a command rather than a search regular expression. It is a common mistake at first to forget the leading space when issuing a command. Be careful.
Try the command foldto report the current status of case-folding. Notice that as soon as you type the space, the prompt changes to: lookup command>
as a reminder that now you're typing a command rather than a search specification.: lookup command> fold
The reply should befile #0's case folding is on
You can actually turn it off with fold off. Now try the search forfukushimaagain. Notice that this time the entries withFukushimaaren't listed? Now try the search stringFukushimaand see that the entries withfukushimaaren't listed.
Case folding is usually very convenient (it also makes corresponding katakana and hiragana match the same), so don't forget to turn it back on:: lookup command> fold on

JAPANESE INPUT

Lookup has an automatic romajikana converter. A leadingAE/indicates that romaji is to follow. Try typing/tokyoand you'll see it convert to/as you type. When you hit return, lookup will list all lines that have asomewhere in them. Well, sort of. Look carefully at the lines which match. Among them (if you had case folding back on) you'll see:: [] /Christianity/
[] /Toukyou (pl)/Tokyo/current capital of Japan/
AE [] /convex lens/
The first one hasin it (as, where the katakanamatches in a case-insensitive manner to the hiragana), but you might consider the others unexpected, since they don't havein them. They're close (and), but not exact. This is the result of lookup'sfuzzification. Try the command fuzz(again, don't forget the command-introduction space). You'll see that fuzzification is turned on. Turn it off with fuzz offand try/tokyo(which will convert as you type) again. This time you only get the lines which haveexactly (well, case folding is still on, so it might match katakana as well).
In a fuzzy search, length of vowels is ignored --is considered the same as, for example. Also, the presence or absence of anycharacter is ignored, and the pairs , , , and are considered identical in a fuzzy search.
It might be convenient to consider a fuzzy search to be apronunciation search. Special note: fuzzification will not be performed if a regular expression*,+,or?modifies a non-ASCII character. This is not an issue when input patterns are filename-like wildcard patterns (discussed below).
In addition to kana fuzziness, there's one special case for kanji when fuzziness is on. The kanji repeater markwill be recognized such thatandwill match each-other.
Turn fuzzification back on (fuzz on), and search for all whole words which sound liketokyo. That search would be specified as:: search [edict]> /<tokyo>
(again, thetokyowill be converted toas you type). My copy of edict has the three lines: [] /Toukyou (pl)/Tokyo/current capital of Japan/
AE [] /special permission/patent/ AE [] /convex lens/
This kind of whole-word romaji-to-kana search is so common, there's a special short cut. Instead of typing/<tokyo>, you can type[tokyo]. The leadingAE[meansstart romajiandstart of word. Were you to type<tokyo>instead (without a leadingAE/orAE[to indicate romaji-to-kana conversion), you would get all lines with the English whole-wordtokyoin them. That would be a reasonable request as well, but not what we want at the moment.
Besides the kana conversion, you can use any cut-and-paste that your windowing system might provide to get Japanese text onto the search line. Cutfrom somewhere and paste onto the search line. When hitting enter to run the search, you'll notice that it is done without fuzzification (even if the fuzzification flag wason). That's because there's no leadingAE/. Not only does a leadingAE/ndicate that you want the romaji-to-kana conversion, but that you want it done fuzzily.
So, if you'd like fuzzy cut-and-paste, just type a leadingAE/efore pasting (or go back and prepend one after pasting).
These examples have all been pretty simple, but you can use all the power that regexes have to offer. As a slightly more complex example, the search<gr[ea]y>would look for all lines with the wordsgreyorgrayin them. Since theAE[isn't the first character of the line, it doesn't mean what was mentioned above (start-of-word romaji). In this case, it's just the regular-expressionclassindicator.
If you feel more comfortable using filename-like*.txtwildcard patterns, you can use thewildcard oncommand to have patterns be considered this way.
This has been a quick introduction to the basics of lookup.
It can be very powerful and much more complex. Below is a detailed description of its various parts and features.

READLINE INPUT

The actual keystrokes are read by a readline-ish package that is pretty standard. In addition to just typing away, the following keystrokes are available:: ^B / ^F move left/right one character on the line
^A / ^E move to the start/end of the line
^H / ^G delete one character to the left/right of the cursor
^U / ^K delete all characters to the left/right of the cursor
^P / ^N previous/next lines on the history list
^L or ^R redraw the line
^D delete char under the cursor, or EOF if line is empty
^space force romaji conversion (^@ on some systems)
If automatic romaji-to-kana conversion is turned on (as it is by default), there are certain situations where the conversion will be done, as we saw above. Lower-case romaji will be converted to hiragana, while upper-case romaji to katakana. This usually won't matter, though, as case folding will treat hiragana and katakana the same in the searches.
In exactly what situations the automatic conversion will be done is intended to be rather intuitive once the basic idea is learned. However, at any time, one can use control-space to convert the ASCII to the left of the cursor to kana. This can be particularly useful when needing to enter kana on a command line (where auto conversion is never done; see below)

ROMAJI FLAVOR

Most flavors of romaji are recognized. Special or non-obvious items are mentioned below. Lowercase are converted to hiragana, uppercase to katakana.

Long vowels can be entered by repeating the vowel, or withAE-orAE^.

In situations where anncould be vague, as innabeing or , use a single quote to force . Therefore,kenichix+- whileken'ichix+-.

The romaji has been richly extended with many non-standard combinations such as or , which are represented in intuitive ways:fax,chex. etc.

Various other mappings of interest:: wo we wi
VA VI VU VE VO(C)
di dzi dya dyu dyo
du tzu dzu
(the following kana are all smaller versions of the regular kana): xa xi xu xe xo(C)
xu xtu xwa xka xke
xya xyu xyo

INPUT SYNTAX

Any input line beginning with a space (or whichever character is set as the command-introduction character) is processed as a command to lookup rather than a search spec. Automatic kana conversion is never done on these lines (but forced conversion with control-space may be done at any time).

Other lines are taken as search regular expressions, with the following special cases:

? A line consisting of a single question mark will report the current com: mand-introduction character (the default is a space, but can be changed with thecmdcharcommand).
= If a line begins withAE=, the line (without theAE=) is taken as a search: regular expression, and no automatic (or internal -- see below) kana conversion is done anywhere on the line (although again, conversion can always be forced with control-space). This can be used to initiate a search where the beginning of the regex is the command-introduction character, or in certain situations where automatic kana conversion is temporarily not desired.
/ A line beginning withAE/indicates romaji input for the whole line. If: automatic kana conversion is turned on, the conversion will be done in real-time, as the romaji is typed. Otherwise it will be done internally once the line is entered. Regardless, the presence of the leadingAE/indicates that any kana (either converted or cut-and-pasted in) should befuzzifiedif fuzzification is turned on.; As an addition to the above, if the line doesn't begin withAE=or the command-introduction character (and automatic conversion is turned on),AE/ anywhere on the line initiates automatic conversion for the following word.
[ A line beginning withAE[is taken to be romaji (just as a line beginning: withAE/, and the converted romaji is subject to fuzzification (if turned on). However, ifAE[is used rather thanAE/, an impliedAE<beginning of wordis prepended to the resulting kana regex. Also, any endingAE]on such a line is converted to theending of wordspecifierAE>in the resulting regex.
In addition to the above, lines may have certain prefixes and suffixes to control aspects of the search or command:
! Various flags can be toggled for the duration of a particular search by: prepending a!!sequence to the input line.; Sequences are shown below, along with commands related to each:

!F! Filtration is toggled for this line (filter)
!M! Modification is toggled for this line (modify)
!w! Word-preference mode is toggled for this line (word)
!c! Case folding is toggled for this line (fold)
!f! Fuzzification is toggled for this line (fuzz)
!W! Wildcard-pattern mode is toggled for this line (wildcard)
!r! Raw. Force fuzzification off for this line
!h! Highlighting is toggled for this line (highlight)
!t! Tagging is toggled for this line (tag)
!d! Displaying is on for this line (display); The letters can be combined, as in!cf!.; The finalAE! can be omitted if the first character after the sequence is not an ASCII letter.; If no letters are given (!!).!f!is the default.; These last two points can be conveniently combined in the common case of!/romajiwhich would be the same as!f!/romaji.; The special sequence!?lists the above, as well as indicates which are currently turned on.; Note that the letters accepted in a!!sequence are many of the indicators shown by thefilescommand.
+ AAE+prepended to anything above will cause the final search regex to be: printed. This can be useful to see when and what kind of fuzzification and/or internal kana conversion is happening. Consider:

search [edict]> +/
a match is[1/4]*?[1/4]*[(C)1/4]*; Due to theleading/ the kana is fuzzified, which explains the somewhat complex resulting regex. For comparison, note:

search [edict]> +
a match is
search [edict]> +!/
a match is; As theAE+shows, these are not fuzzified. The first one has no leadingAE/orAE[to induce fuzzification, while the second has theAE!line prefix (which is the default version of!f!), which toggles fuzzification mode toofffor that line.
, The default of all searches and most commands is to work with the first: file loaded (edict in these examples). One can change this default (see theselectcommand) or, by appending a comma+digit sequence at the end of an input line, force that line to work with another previously-loaded file. An appended,1works with first extra file loaded (in these examples, kanjidic). An appended,2works with the 2nd extra file loaded, etc.; An appended,0works with the original first file (and can be useful if the default file has been changed via theselectcommand).; The following sequence shows a common usage:

search [edict]> []
[] /Tokyo Metropolitan area/

cutting and pasting the from above, and adding a,1to search kanjidic:

search [edict]> ,1
4554 N4769 S11 ..... {metropolis} {capital}

FILENAME-LIKE WILDCARD MATCHING

When wildcard-pattern mode is selected, patterns are considered as extended.Q "*.txt" "-like" patterns. This is often more convenient for users not familiar with regular expressions. To have this mode selected by default, put: default wildcard on
into your.lookupfile (seeSTARTUP FILEbelow).
When wildcard mode is on, only *,?,+,and.,are effected. See the entry for the wildcardcommand below for details.
Other features, such as the multiple-pattern searches (described below) and other regular-expression metacharacters are available.

MULTIPLE-PATTERN SEARCHES

You can put multiple patterns in a single search specifier. For example consider: search [edict]> china||japan
The first part (china) will select all lines that havechinain them. Then, from among those lines, the second part will select lines that havejapanin them. The||is not part of any pattern -- it is lookup'spipemechanism.
The above example is very different from the single pattern china|japanwhich would select any line that had eitherchinaorjapan. Withchina||japan, you get lines that havechinaand then also havejapanas well.
Note that it is also different from the regular expressionchina.*japan(or the wildcard patternchina*japan)which would select lines havingchina, then maybe some stuff, then japan. But consider the case whenjapancomes on the line beforechina. Just for your comparison, the multiple-pattern specifierchina||japanis pretty much the same as the single regular expressionchina.*japan|japan.*china.
If you use|!|instead of||, it will mean...and then lines not matching....
Consider a way to find all lines of kanjidic that do have a Halpern number, but don't have a Nelson number:: search [edict]> <H\d+>|!|<N\d+>
If you then wanted to restrict the listing to those that also had ajinmeiyoumarking (kanjidic'sG9field) and had a reading of , you could make it:: search [edict]> <H\d+>|!|<N\d+>||<G9>||<>
A prependedAE+would explain:: a match is<H\d+>
and not<N\d+>
and<G9>
and<>
The|!|and||can be used to make up to ten separate regular expressions in any one search specification.
Again, it is important to stress that||does not meanor(as it does in a C program, or asAE|does within a regular expression). You might find it convenient to read||asand also, while reading|!|asbut not.
It is also important to stress that any whitespace around the||and|!|construct is not ignored, but kept as part of the regex on either side.

COMBINATION SLOTS

Each file, when loaded, is assigned to aslotvia which subsequent references to the file are then made. The slot may then be searched, have filters and flags set, etc.

A special kind of slot, called acombination slot,rather than representing a single file, can represent multiple previously-loaded slots. Searches against a combination slot (orcombo slotfor short) search all those previously-loaded slots associated with it (calledcomponent slots). Combo slots are set up with the combine command.

A Combo slot has no filter or modify spec, but can have a local prompt and flags just like normal file slots. The flags, however, have special meanings with combo slots. Most combo-slot flags act as a mask against the component-slot flags; when acted upon as a member of the combo, a componentslot's flag will be disabled if the corresponding combo-slot's flag is disabled.

Exceptions to this are the autokana, fuzz, and tag flags.

The autokana and fuzz flags governs a combo slot exactly the same as a regular file slot. When a slot is searched as a component of a combination slot, the component slot's fuzz (and autokana) flags, or lack thereof, are ignored.

The tag flag is quite different altogether; see the tag command for complete information.

Consider the following output from the files command:: (R)
0F wcfh da I 2762k/usr/jfriedl/lib/edict
1FM cf da I 705k/usr/jfriedl/lib/kanjidic
2F cfh@da 1k/usr/jfriedl/lib/local.words; *3FM cfhtda combokotoba (#2, #0)
+
See the discussion of the files command below for basic explanation of the output.
As can be seen, slot #3 is a combination slot with the namekotobawith component slots two and zero. When a search is initiated on this slot, first slot #2local.wordswill be searched, then slot #0edict. Because the combo slot's filter flag is on, the component slots' filter flag will remain on during the search. The combo slot's word flag is off, however, so slot #0's word flag will be forced off during the search.
See the combine command for information about creating combo slots.

PAGER

Lookup has a built in pager (a'la more). Upon filling a screen with text, the string: --MORE [space,return,c,q]-
is shown. A space will allow another screen of text; a return will allow one more line. AAEc will allow output text to continue unpaged until the next command. AAEq will flush output of the current command.
If supported by the OS, lookup's idea of the screen size is automatically set upon startup and window resize. Lookup must know the width of the screen in doing both the horizontal input-line scrolling, and for knowing when a long line wraps on the screen.
The pager parameters can be set manually with thepagercommand.

COMMANDS

Any line intended to be a command must begin with the command-introduction character (the default is a space, but can be set via thecmdcharcommand). However, that character is not part of the command itself and won't be shown in the following list of commands.

There are a number of commands that work with the selected file or selected slot (both meaning the same thing). The selected file is the one indicated by an appended comma+digit, as mentioned above. If no such indication is given, the default selected file is used (usually the first file loaded, but can be changed with theselectcommand).

Some commands accept a boolean argument, such as to turn a flag on or off. In all such cases, a1oronmeans to turn the flag on, while a0oroffis used to turn it off. Some flags are per-file (fuzz,fold, etc.), and a command to set such a flag normally sets the flag for the selected file only. However, the default value inherited by subsequently loaded files can be set by prependingdefaultto the command. This is particularly useful in the startup file before any files are loaded (see the section STARTUP FILE).

Items separated byAE|are mutually exclusive possibilities (i.e. a boolean argument is1|on|0|off).

Items shown in brackets (AE[andAE]) are optional. All commands that accept a boolean argument to set a flag or mode do so optionally -- with no argument the command will report the current status of the mode or flag.

Any command that allows an argument in quotes (such as load, etc.) allow the use of single or double quotes.

The commands:

[default] autokana [boolean]: Automatic romaji kana conversion for the selected file is turned on or off (default is on). However, ifdefaultis specified, the value to be inherited as the default by subsequently-loaded files is set (or reported).; Can be temporarily disabled by a prependedAE=,as described in the INPUT SYNTAX section.
clear|cls: Attempts to clear the screen. If you're using a kterm it'll just output the appropriate tty control sequence. Otherwise it'll try to run theclearcommand.
cmdchar ['one-byte-char']: The default command-introduction character is a space, but it may be changed via this command. The single quotes surrounding the character are required. If no argument is given, the current value is printed.; An input line consisting of a single question mark will also print the current value (useful for when you don't know the current value).; Woe to the one that sets the command-introduction character to one of the other special input-line characters, such asAE+,AE/, etc.
combine ["name"] [ num += ] slotnum ...: Creates or adds file slots to a combination slot (see the COMBINATION SLOTS section for general information). Note thatcombomay be used as the command as well.; Assuming for this example that slots 0-2 are loaded with the files curly, moe, and larry, we can create a combination slot that will reference all three:

combo "three stooges" 2, 0, 1; The command will report

creating combo slot #3 (three stooges): 2 0 1; The name is optional, and will appear in the files list, and also maybe be used to specify the slot as an argument to the select command.; A search via the newly created combo slot would search in the order specified on the combo command line: first larry, then curly, and finally moe.; If you later load another file (say, jeffrey to slot #4), you can then add it to the previously made combo:

combo 3 += 4; (the+=wording comes from the C programming language where it meansadd on to). Adding to a combination always adds slots to the end of the list.; You can take the opportunity of adding the slot to also change the name, if you like:

combo "four stooges" 3 += 4; The reply would be
adding to combo slot #3(four stooges): 4; A file slot can be a component of any particular combo slot only once. When reporting the created or added slot numbers, the number will appear in parenthesis if it had already been a member of the list.; Furthermore, only file slots can be component members of combo slots. Attempting to combine combo slot X to combo slot Y will result in having X's component file slots (rater than the combo slot itself) added to Y.
command debug [boolean]: Sets the internal command parser debugging flag on or off (default is off).
debug [boolean]: Sets the internal general-debugging flag on or off (default is off).
describe specifier: This command will tell you how a character (or each character in a string) is encoded in the various encoding methods:

lookup command> describe ""
as EUC is 0xb5a4 (181 164; 265 \244)
as JIS is 0x3524 ( 53 36; 65 \044 "5$")
as KUTEN is 2104 ( 0x1504; 25 \004)
as S-JIS is 0x8b1f (139 31; 213 \037)
The quotes surrounding the character or string to describe are optional. You can also give a regular ASCII character and have the double-width version of the character described.... indicatingA, for example, would describe. Specifier can also be a four-digit kuten value, in which case the character with that kuten will be described.
If a four-digit specifier has a hex digit in it, or if it is preceded by0x, the value is taken as a JIS code. You can precede the value byjis,sjis,euc, orkutento force interpretation to the requested code.
Finally, specifier can be a string of stripped JIS (JIS w/o the kanji-in and kanji-out codes, or with the codes but without the escape characters in them). For exampleF|K\would describe the two characters AE and .
encoding [euc|sjis|jis]: The same as the -euc, -jis, and -sjis command-line options, sets the encoding method for interactive input and output (or reports the current status). More detail over the output encoding can be achieved with the output encoding command. A separate encoding for input can be set with the input encoding command.
files [ - | long ]: Lists what files are loaded in what slots, and some status information about them, as with:; *0F wcfh da I 3749k/usr/jeff/lib/edict
1FM cf da I 754k/usr/jeff/lib/kanjidic

(R)
0F wcf h d a I 2762k/usr/jfriedl/lib/edict
1FM cf d a I 705k/usr/jfriedl/lib/kanjidic
2F cfWh@d a 1k/usr/jfriedl/lib/local.words

*3FM cf htd a combokotoba (#2, #0)

4 cf d a 205k/usr/dict/words

+

The first section is the slot number, with a*beside the default slot (as set by the select command).

The second section shows per-slot flags and status. Letters are shown if the flag is on, omitted if off. In the list below, related commands are given for each item:

F if there is a filter {but '#' if disabled}. (filter)
M if there is a modify spec {but '%' if disabled}. (modify)
w if word-preference mode is turned on. (word)
c if case folding is turned on. (fold)
f if fuzzification is turned on. (fuzz)
W if wildcard-pattern mode is turned on (wildcard)
h if highlighting is turned on. (highlight)
t if there is a tag {but @ if disabled} (tag)
d if found lines should be displayed (display)

a if autokana is turned on (autokana)
P if there is a file-specific local prompt (prompt)
I if the file is loaded with a precomputed index (load)
d if the display flag is on (display)

Note that the letters in the upper section directly correspond to the!!sequence characters described in the INPUT SYNTAX section.

If there is a digit at the end of the flag section, it indicates that only #/10 of the file is actually loaded into memory (as opposed to the file having been completely loaded). Unloaded files will be loaded while lookup is idle, or when first used.

If the slot is a combination slot (as slot #3 is in the example above), that is noted in the third section, and the combination name and component slot numbers are noted in the fourth. Also, for combination slots (which have no filter or modify specifications, only the flags), F and/or M are shown if the corresponding mode is allowed during searches via the combo slot. See the tag command for info about t with respect to combination slots.

If an argument (either-orlongwill work) is given to the command, a short message about what the flags mean is also printed.
filter ["label"] [!] /regex/[i]: Sets the filter for the selected slot (which must contain a file and not a combination). If a filter is set and active for a file, any line matching the given regex is filtered from the output (if theAE!is put before the regex, any line not matching the regex is filtered). The label , which isn't required, merely acts as documentation in various diagnostics.; As an example, consider that edict lines often have(pn)on them to indicate that the given English is a place name. Often these place names can be a bother, so it would be nice to elide them from the output unless specifically requested. Consider the example:

lookup command> filter "name" /(pn)/
search [edict]> []
1/2 [] /function/faculty/
1/4 [] /inductive/
AE [] /yesterday/
3 "name" lines filtered; In the example,AE/characters are used to delimit the start and stop of the regex (as is common with many programs). However, any character can be used. A finalAEi, if present, indicates that the regex should be applied in a case-insensitive manner.; The filter, once set, can be enabled or disabled with the other form of thefiltercommand (described below). It can also be temporarily turned off (or, if disabled, temporarily turned on) by the!F!line prefix.; Filtered lines can optionally be saved and then displayed if you so desire. See thesaved list sizeandshowcommands.; Note that if you have saving enabled and only one line would be filtered, it is simply printed at the end (rather than print a one line message about how one line was filtered).; By the way, a betternamefilter for edict would be:

filter "name" #^[^/]+/[^/]*<p[ln]>[^/]*/$#; as it would filter all entries that had only one English section, that section being a name. It is also an example of using something other thanAE/to delimit a regex, as it makes things a bit easier to read.
filter [boolean]: Enables or disables the filter for the selected slot. If no argument is given, displays the current filter and status.
[default] fold [boolean]: The selected slot's case folding is turned on or off (default is on), or reported if no argument given. However, ifdefaultis specified, the value to be inherited as the default by subsequently-loaded files is set (or reported).; Can be temporarily toggled by the!c!line prefix.
[default] fuzz [boolean]: The selected slot's fuzzification is turned on or off (default is on), or reported if no argument given. However, ifdefaultis specified, the value to be inherited as the default by subsequently-loaded files is set (or reported).; Can be temporarily toggled by the!f!line prefix.
help [regex]: Without an argument gives a short help list. With an argument, lists only commands whose help string is picked up by the given regex.
[default] highlight [boolean]: Sets matched-string highlighting on or off for the selected slot (default off), or reports the current status if no argument is given. However, ifdefaultis specified, the value to be inherited as the default by subsequently-loaded files is set (or reported).; If on, shows in bold or reverse video (see below) that part of the line which was matched by the search regex. If multiple regexes were given, that part matched by the first regex is show.; Note that a regex might match a portion of a line which is later removed by a modify parameter. In this case, no highlighting is done.; Can be temporarily toggled by the!h!line prefix.
highlight style [bold | inverse | standout | <___>]: Sets the style of highlighting for when highlighting is done. Inverse (inverse video) and standout are the same. The default is bold. You can also give an HTML tag, such as<BOLD>and items will be wrapped by <BOLD>...</BOLD>. This would be particularly useful when the output is going to a CGI, as when lookup has been built in a server configuration.; Note that the highlighting is affected by using raw VT100/xterm control sequences. This isn't particularly very nice if your terminal doesn't understand them. Sorry.
if {expression} command...: If the evaluated expression is non-zero, the command will be executed.; Note that {} rather than () surround the expression.; Expression may be comprised of numbers, operators, parenthesis, etc. In addition to the normal +, -, *, and /, are:

!x yields 0 if x is non-zero, 1 if x is zero.
x && y
!x AEnotYields 1 if x is zero, 0 if non-zero.
x & y AEandYields 1 if both x and y are non-zero, 0 otherwise. x | y AEor Yields 1 if x or y (or both) is non-zero, 0 otherwise; There may also be the special tokens true and false which are 1 and 0 respectively.; There are also checked, matched, printed, nonword, and filtered which correspond to the values printed by the stats command.; An example use might be the following kind of thing in an computer-generated script:

!d!expect this line
if {!printed} msg Oops! couldn't find "expect this line"
input encoding [ euc | sjis ]: Used to set (or report) what encoding to use when 8-bit bytes are found in the interactive input (all flavors of JIS are always recognized). Also see the encoding and output encoding commands.
limit [value]: Sets the number of lines to print during any search before aborting (or reports the current number if no value given). Default is 100.; Output limiting is disabled if set to zero.
log [ to [+] file ]: Begins logging the program output to file (the Japanese encoding method being the same as for screen output). If+is given, the log is appended to any text that might have previously been in file, in which case a leading dashed line is inserted into the file.; If no arguments are given, reports the current logging status.
log - | off: If only-or off is given, any currently-opened log file is closed.
load [-now|-whenneeded] "filename": Loads the named file to the next available slot. If a precomputed
index is found (asfilename.jin)it is loaded as well. Otherwise, an index is generated internally.; The file to be loaded (and the index, if loaded) will be loaded during idle times. This allows a startup file to list many files to be
loaded, but not have to wait for each of them to load in turn. Using
the -nowflag causes the load to happen immediately, while using the
-whenneededoption (can be shortened to -wn)causes the load to happen
only when the slot is first accessed.; Invoke lookup as
% lookup -writeindex filename; to generate and write an index file, which will then be automatically
used in the future.; If the file has already been loaded, the file is not re-read, but the
previously-read file is shared. The new slot will, however, have its
own separate flags, prompt, filter, etc.
modify /regex/replace/[ig]: Sets the modify parameter for the selected file. If a file has a modify parameter associated with it, each line selected during a
search will have that part of the line which matches regex (if any) replaced by the replacement string before being printed.; Like the filter command, the delimiter need not beAE/; any non-space character is fine. If a finalAEiis given, the regex is applied in a
case-insensitive manner. If a finalAEgis given, the replacement is
done to all matches in the line, not just the first part that might
match regex.; The replacement may have embedded1, etc. in it to refer to parts of the matched text (see the tutorial on regular expressions).; The modify parameter, once set, may be enabled or disabled with the
other form of the modify command (described below). It may also be
temporarily toggled via the!m!line prefix.; A silly example for the ultra-nationalist might be:
modify /<Japan>/Dainippon Teikoku/g; So that a line such as
AE [(R)] /Bank of Japan/; would come out as
AE [(R)] /Bank of Dainippon Teikoku/; As a real example of the modify command with kanjidic, consider that it is likely that one is not interested in all the various fields
each entry has. The following can be used to remove the info on the
U, N, Q, M, E, B, C, and Y fields from the output:

modify /( [UNQMECBY]\S+)+//g,1; It's sort of complex, but works. Note that here the replacement part is empty, meaning to just remove those parts which matched. The
result of such a search of AE would normally print

AE 467c U65e5 N2097 B72 B73 S4 G1 H3027 F1 Q6010.0 MP5.0714
MN13733 E62 Yri4 P3-3-1 - - {day}; but with the above modify spec, appears more simply as

AE 467c S4 G1 H3027 F1 P3-3-1 - - {day}
modify [boolean]: Enables or disables the modify parameter for the selected file, or report the current status if no argument is given.
msg string: The given string is printed.; Most likely used in a script as the target command of an if command.
output encoding [ euc | sjis | jis...]: Used to set exactly what kind of encoding should be used for program
output (also see the input encoding command). Used when the encoding command is not detailed enough for one's needs.; If no argument is given, reports the current output encoding. Otherwise, arguments can usually be any reasonable dash-separated combination of:

euc
Selects EUC for the output encoding.

sjis

Selects Shift-JIS for the output encoding.

jis[78|83|90][-ascii|-roman]

Selects JIS for the output encoding. If no year (78, 83, or 90)
given, 78 is used. Can optionally specify thatEnglishshould be
encoded as regular ASCII (the default when JIS selected) or as JIS-ROMAN.

212

Indicates that JIS X0212-1990 should be supported (ignored for
Shift-JIS output).

no212

Indicates that JIS X0212-1990 should be not be supported
(default setting). This places JIS X0212-1990 characters under
the domain of disp, nodisp, code, or mark (described below).

hwk

Indicates that half width kana should be left as-is (default setting).

nohwk

Indicates that half width kana should be stripped from the output. (not yet implemented).

foldhwk

Indicates that half width kana should be folded to their fullwidth counterparts. (not yet implemented).

disp

Indicates that non-displayable characters (such as JIS X0212-1990 while the output encoding method is Shift-JIS) should
be passed along anyway (most likely resulting in screen
garbage).

nodisp

Indicates that non-displayable characters should be quietly stripped from the output.

code

Indicates that non-displayable characters should be printed as their octal codes (default setting).

mark

Indicates that non-displayable characters should be printed as.

Of course, not all options make sense in all combinations, or at
all times. When the current (or new) output encoding is reported,
a complete and exact specifier representing the output encoding
selected. An example might bejis78-ascii-no212-hwk-code.
pager [ boolean | size ]: Turns on or off an output pager, sets it's idea of the screen size,
or reports the current status.; Size can be a single number indicating the number of lines to be printed betweenMORE?prompts (usually a few lines less than the total
screen height, the default being 20 lines). It can also be two numbers in the form#x#where the first number is the width (in half-width
characters; default 80) and the second is the lines-per-page as
above.; If the pager is on, every page of output will result in aMORE?prompt,
at which there are four possible responses. A space will allow one
more full page to print. A return will allow one more line.
AAEc(forcontinue) will all the rest of the output (for the current
command) to proceed without pause, while aAEq(forquit) will flush the
output for the current command.; If supported by the OS, the pager size parameters are set appropriately from the window size upon startup or window resize.; The default pager status isoff.
[local] prompt "string": Sets the prompt string. Iflocalis indicated, sets the prompt string
for the selected slot only. Otherwise, sets the global default prompt string.; Prompt strings may have the special %-sequences shown below, with
related commands given in parenthesis:

%N the default slot's file or combo name.
%n like %N, but any leading path is not shown if a filename.
%# the default slot's number.
%S thecommand-introductioncharacter (cmdchar)
%0 the running program's name
%F='string' string shown if filtering enabled (filter) %M='string' string shown if modification enabled (modify) %w='string' string shown if word mode on (word) %c='string' string shown if case folding on (fold) %f='string' string shown if fuzzification on (fuzz). %W='string' string shown if wildcard-pat. mode on (wildcard). %d='string' string shown if displaying on (display). %C='string' string shown if currently entering a command. %l='string' string shown if logging is on (log). %L the name of the current output log, if any (log); For the tests (%f, etc), you can putAE!just after theAE%to reverse
the sense of the test (i.e. %!f="no fuzz"). The reverse of %F is if
a filter is installed but disabled (i.e. string will never be shown if there is no filter for the default file). The modify %M works
comparably.; Also, you can use an alternative form for the items that take an
argument string. Replacing the quotes with parentheses will treat
string as a recursive prompt specifier. For example, the specifier

%C='command'%!C(%f='fuzzy 'search:); would result in acommandprompt if entering a command, while it would
result in either afuzzy search:or asearch:prompt if not entering a
command. The parenthesized constructs may be nested.; Note that the letters of the test constructs are the same as the letters for the!!sequences described in INPUT SYNTAX.; An example of a nice prompt command might be:

prompt "%C(%0 command)%!C(%w'*'%!f'raw '%n)> "
With this prompt specification, the prompt would normally appear asfilename> but when fuzzification is turned off asraw filename> . And if word-preference mode is on, the whole thing has a*prepended. However if a command is being entered, the prompt would then becomename command, where name was the program's name (system dependent, but most likelylookup).
The default prompt format string is%C(%0 command)%!C(search [%n])> .
regex debug [boolean]: Sets the internal regex debugging flag (turn on if you want billions
of lines of stuff spewed to your screen).
saved list size [value]: During a search, lines that match might be elided from the output due
to filters or word-preference mode. This command sets the number of
such lines to remember during any one search, such that they may be
later displayed (before the next search) by the show command.; The default is 100.
select [ num | name | . ]: If num is given, sets the default slot to that slot number. If name is given, sets the default slot to the first slot found with a file (or combination) loaded with that name. The incantationselect
.merely sets the default slot to itself, which can be useful in
script files where you want to indicate that any subsequent flags
changes should work with whatever file was the default at the time
the script was sourced.; If no argument is given, simply reports the current default slot (also see the files command).; In command files loaded via the source command, or as the startup file, commands dealing with per-slot items (flags, local prompt, filters, etc.) work with the file or slot last selected. The last such selected slot remains selected once the load is complete.; Interactively, the default slot will become the selected slot for subsequent searches and commands that aren't augmented with an
appended,#(as described in the INPUT SYNTAX section).
show: Shows any lines elided from the previous search (either due to a filter or word-preference mode).; Will apply any modifications (see themodifycommand) if modifications
are enabled for the file. You can use the!m!line prefix as well with
this command (in this case, put the!m!before the command-indicator character).; The length of the list is controlled by thesaved list sizecommand.
source "filename": Commands are read from filename and executed.; In the file, all lines beginning with#are ignored as comments (note
that comments must appear on a line by themselves, as#is a reasonable
character to have within commands).; Lines whose first non-blank characters is=,!,or+are considered
searches, while all other non-blank lines are considered lookup commands. Therefore, there is no need for lines to begin with the command-introduction character. However, leading whitespace is always
OK.; For search lines, take care that any trailing whitespace is deleted
if undesired, as trailing whitespace (like all non-leading whitespace) is kept as part of the regular expression.; Within a command file, commands that modify per-file flags and such
always work with the most-recently loaded (or selected) file. Therefore, something along the lines of

load "my.word.list"
set word on

load "my.kanji.list"
set word off
set local prompt "enter kanji> "; would word as might make intuitive sense.; Since a script file must have a load, or select before any per-slot flag is set, one can useselect .to facilitate command scripts that
are to work withthe current slot.
spinner [value]: Set the value of the spinner (A silly little feature). If set to a
non-zero value, will cause a spinner to spin while a file is being
checked, one increment per value lines in the file actually checked against the search specifier. Default is off (i.e. zero).
stats: Shows information about how many lines of the text file were checked
against the last search specifier, and how many lines matched and
were printed.
tag [boolean] ["string"]: Enable, disable, or set the tag for the selected slot.; If the slot is not a combination slot, a tag string may be set (the quotes are required).; If a tag string is set and enabled for a file, the string is
prepended to each matching output line printed.; Unlike the filter and modify commands which automatically enable the function when a parameter is set, a tag is not automatically enabled when set. It can be enabled while being set via'tagonor could be
enabled subsequently via justtag on If the selected slot is a combination slot, only the enable/disable status may be changed (on by
default). No tag string may be set.; The reason for the special treatment lies in the special nature of
how tags work in conjunction with combination files.; During a search when the selected slot is a combination slot, each
file which is a member of the combination has its per-file flags disabled if their corresponding flag is disabled in the original combination slot. This allows the combination slot's flags to act as
amaskto blot out each component file's per-file flags.; The tag flag, however, is special in that the component file's tag
flag is turned on if the combination slot's tag flag is turned on (and, of course, the component file has a tag string registered).; The intended use of this is that one might set a (disabled) tag to a
file, yet direct searches against that file will have no prepended tag. However, if the file is searched as part of a combination slot
(and the combination slot's tag flag is on), the tag will be prepended, allowing one to easily understand from which file an output line comes.
verbose [boolean]: Sets verbose mode on or off, or reports the current status (default
on). Many commands reply with a confirmation if verbose mode is
turned on.
version: Reports the current version of the program.
[default] wildcard [boolean]: The selected slot's patterns are considerd wildcard patterns if turned on, regular expressions if turned off. The current status is
reported if no argument given. However, ifdefaultis specified, the
pattern-type to be inherited as the default by subsequently-loaded
files is set (or reported).; Can be temporarily toggled by the!W!line prefix.; When wildcard patterns are selected, the changed metacharacters
are:*meansany stuff,?meansany one character,while+and.become unspecial. Other regex items such as|,(,[,etc. are unchanged.; What*and?will actually match depends upon the status of word-mode, as
well as on the pattern itself. If word-mode is on, or if the pattern
begins with the start-of-word<or[,only non-spaces will be matched.
Otherwise, any character will be matched.; In summary,when wildcard mode is on, the input pattern is effected in
the following ways:

* is changed to the regular expression .* or
? is changed to the regular expression . or + is changed to the regular expression + . is changed to the regular expression .; Because filename patterns are often calledfilename globs,the commandglobcan be used in place ofwildcard.
[default] word|wordpreference [boolean]: The selected file's word-preference mode is turned on or off (default
is off), or reports the current setting if no argument is specified.
However, ifdefaultis specified, the value to be inherited as the
default by subsequently-loaded files is set (or reported).; In word-preference mode, entries are searched for as if the search regex had a leadingAE<and a trailingAE>, resulting in a list of
entries with a whole-word match of the regex. However, if there are
none, but there are non-word entries, the non-word entries are shown (thesaved listis used for this -- see that command). This make it
anif there are whole words like this, show me, otherwise show me
whatever you've gotmode.; If there are both word and non-word entries, the non-word entries are
remembered in the saved list (rather than any possible filtered
entries being remembered there).; One caveat: if a search matches a line in more than one place, and
the first is not a whole-word, while one of the others is, the line will be listed considered non-whole word. For example, the searchjapanxwith word-preference mode on will not list an entry such
as/Japanese/language in Japan/, as the firstJapanis part ofJapaneseand not a whole word. If you really need just whole-word entries,
use theAE<andAE>yourself.; The mode may be temporarily toggled via the!w!line prefix.; The rules defining what lines are filtered, remembered, discarded,
and shown for each permutation of search are rather complex, but the
end result is rather intuitive.
quit | leave | bye | exit: Exits the program.

STARTUP FILE

If the file~/.lookupis present, commands are read from it during lookup startup.

The file is read in the same way as the source command reads files (see that entry for more information on file format, etc.)

However, if there had been files loaded via command-line arguments, commands within the startup file to load files (and their associated commands such as to set per-file flags) are ignored.

Similarly, any use of the command-line flags -euc, -jis, or -sjis will
disable in the startup file the commands dealing with setting the input
and/or output encodings.

The special treatment mentioned in the above two paragraphs only applies
to commands within the startup file itself, and does not apply to commands in command-files that might be sourced from within the startup file.

The following is a reasonable example of a startup file:: ## turn verbose mode off during startup file processing
verbose off; prompt "%C([%#]%0)%!C(%w'*'%!f'raw '%n)> "
spinner 200
pager on; ## The filter for edict will hit for entries that
## have only one English part, and that English part
## having a pl or pn designation.
load ~/lib/edict
filter "name" #^[^/]+/[^/]*<p[ln]>[^/]*/$#
highlight on
word on; ## The filter for kanjidic will hit for entries without a
## frequency-of-use number. The modify spec will remove
## fields with the named initial code (U,N,Q,M,E, and Y)
load ~/lib/kanjidic
filter "uncommon" !/<F\d+>/
modify /( [UNQMEY])+//g; ## Use the same filter for my local word file,
## but turn off by default.
load ~/lib/local.words
filter "name" #^[^/]+/[^/]*<p[ln]>[^/]*/$#
filter off
highlight on
word on
## Want a tag for my local words, but only when
## accessed via the combo below
tag off ""; combine "words" 2 0
select words; ## turn verbosity back on for interactive use.
verbose on

COMMAND-LINE ARGUMENTS

With the use of a startup file, command-line arguments are rarely needed. In practical use, they are only needed to create an index file, as in:: lookup -write textfile
Any command line arguments that aren't flags are taken to be files which are loaded in turn during startup. In this case, anyload,filter, etc. commands in the startup file are ignored.
The following flags are supported:
-help: Reports a short help message and exits.
-write Creates index files for the named files and exits. No: startup file is read.
-euc: Sets the input and output encoding method to EUC (currently the
default). Exactly the same as theencoding euccommand.
-jis: Sets the input and output encoding method to JIS. Exactly the same
as theencoding jiscommand.
-sjis: Sets the input and output encoding method to Shift-JIS. Exactly the
same as theencoding sjiscommand.
-v -version: Prints the version string and exits.
-norc: Indicates that the startup file should not be read.
-rc file: The named file is used as the startup file, rather than the
default~/.lookup. It is an error for the file not to exist.
-percent num: When an index is built, letters that appear on more than num percent (default 50) of the lines are elided from the index. The thought is
that if a search will have to check most of the lines in a file anyway, one may as well save the large amount of space in the index file
needed to represent that information, and the time/space tradeoff
shifts, as the indexing of oft-occurring letters provides a diminishing return.; Smaller indexes can be made by using a smaller number.
-noindex: Indicates that any files loaded via the command line should not be
loaded with any precomputed index, but recalculated on the fly.
-verbose: Has metric tons of stats spewed whenever an index is created.
-port ###: For the (undocumented) server configuration only, tells which port to
listen on.

OPERATING SYSTEM CONSIDERATIONS

I/O primitives and behaviors vary with the operating system. On my operating system, I canreada file by mapping it into memory, which is a
pretty much instant procedure regardless of the size of the file. When
I later access that memory, the appropriate sections of the file are
automatically read into memory by the operating system as needed.

This results in lookup starting up and presenting a prompt very quickly, but causes the first few searches that need to check a lot of lines in
the file to go more slowly (as lots of the file will need to be read
in). However, once the bulk of the file is in, searches will go very
fast. The win here is that the rather long file-load times are amortized
over the first few (or few dozen, depending upon the situation) searches
rather than always faced right at command startup time.

On the other hand, on an operating system without the mapping ability,
lookup would start up very slowly as all the files and indexes are read into memory, but would then search quickly from the beginning, all the
file already having been read.

To get around the slow startup, particularly when many files are loaded,
lookup uses lazy loading if it can: a file is not actually read into memory at the time the load command is given. Rather, it will be read when first actually accessed. Furthermore, files are loaded while
lookup is idle, such as when waiting for user input. See the files command for more information.

REGULAR EXPRESSIONS, A BRIEF TUTORIAL

Regular expressions (regexfor short) are acodeused to indicate what kind of text you're looking for. They're how one searches for things in the
editorsvi,stevie,mifesetc., or with the grep commands. There are differences among the various regex flavors in use -- I'll describe the
flavor used by lookup here. Also, in order to be clear for the common case, I might tell a few lies, but nothing too heinous.

The regexaxmeansany line with anAEain it. Simple enough.

The regexabxmeansany line with anAEaimmediately followed by aAEb. So the line: I am feeling flabby
wouldmatchthe regexabxbecause, indeed, there's anabon that line. But it wouldn't match the line: this line has no a followed _immediately_ by a b
because, well, what the lines says is true.
In most cases, letters and numbers in a regex just mean that you're looking for those letters and numbers in the order given. However, there are some special characters used within a regex.
A simple example would be a period. Rather than indicate that you're looking for a period, it meansany character. So the silly regex.xwould meanany line that has any character on it.Well, maybe not so silly... you can use it to find non-blank lines.
But more commonly it's used as part of a larger regex. Consider the regexgrayx. It wouldn't match the line: The sky was grey and cloudy.
because of the different spelling (grey vs. gray). But the regexgr.yxasks forany line with aAEg,AEr, some character, and then aAEy. So this would getgreyandgray. A special construct somewhat similar toAE.would be the character class. A character class starts with aAE[and ends with aAE], and will match any character given in between. An example might be: gr[ea]y
which would match lines with aAEg,AEr, anAEeor anAEa, and then aAEy. Inside a character class you can list as many characters as you want to.
For example the simple regexx[0123456789]yxwould match any line with a digit sandwiched between anAExand aAEy.
The order of the characters within the character class doesn't really matter...[513467289]xwould be the same as[0123456789]x.
But as a short cut, you could put[0-9]xinstead of[0123456789]x. So the character class[a-z]xwould match any lower-case letter, while the character class[a-zA-Z0-9]xwould match any letter or digit.
The characterAE-is special within a character class, but only if it's not the first thing. Another character that's special in a character class isAE^, if it is the first thing. Itinvertsthe class so that it will match any character not listed. The class[^a-zA-Z0-9]xwould match any line with spaces or punctuation on them.
There are some special short-hand sequences for some common character classes. The sequence\dxmeansdigit, and is the same as[0-9]x. \wxmeansword elementand is the same as[0-9a-zA-Z_]x. \sxmeansspace-type thingand is the same as[ \t]x(\txmeans tab).
You can also use\Dx,\Wx, and\Sxto mean things not a digit, word element, or space-type thing.
Another special character would beAE?. This meansmaybe one of whatever was just before it, not is fine too. In the regex bikes? for rentx, thewhateverwould be theAEs, so this would match lines with eitherbikes for rentorbike for rent.
Parentheses are also special, and can group things together. In the regex
big (fat harry)? deal
thewhateverfor theAE?would befat harry. But be careful to pay attention to details... this regex would match: I don't see what the big fat harry deal is!
but not: I don't see what the big deal is!
That's because if you take away thewhateverof theAE?, you end up with: big deal
Notice that there are two spaces between the words, and the regex didn't allow for that. The regex to get either line above would be: big (fat harry )?deal
or: big( fat harry)? deal
Do you see how they're essentially the same?
Similar toAE?isAE*, which meansany number, including none, of whatever's right in front. It more or less means that whatever is tagged withAE*is allowed, but not required, so something like: I (really )*hate peas
would matchI hate peas,I really hate peas!,I really really hate peas, etc.
Similar to bothAE?andAE*isAE+, which meansat least one of whatever just in front, but more is fine too. The regexmis+pellingxwould matchmispelling,misspelling,missspelling, etc. Actually, it's just the same asmiss*pellingxbut more simple to type. The regexss*xmeansanAEs, followed by zero or moreAEs, whiles+xmeansone or moreAEs. Both really the same.
The special characterAE|meansor. UnlikeAE+,AE*, andAE?which act on the thing immediately before, theAE|is moreglobal.: give me (this|that) one
Would match lines that hadgive me this oneorgive me that onein them.
You can even combine more than two:: give me (this|that|the other) one
How about:: [Ii]t is a (nice |sunny |bright |clear )*day
Here, thewhateverimmediately before theAE*is: (nice |sunny |bright |clear )
So this regex would match all the following lines:: It is a day.
I think it is a nice day.
It is a clear sunny day today.
If it is a clear sunny nice sunny sunny sunny bright day then....
Notice how the[Ii]txmatches eitherItorit?
Note that the above regex would also match: fruit is a day
because it indeed fulfills all requirements of the regex, even though theitis really part of the wordfruit. To answer concerns like this, which are common, areAE<andAE>, which meanword break. The regex<itxwould match any line withitbeginning a word, whileit>xwould match any line withitending a word. And, of course,<it>xwould match any line with the worditin it.
Going back to the regex to find grey/gray, that would make more sense, then, as: <gr[ae]y>
which would match only the wordsgreyandgray. Somewhat similar areAE^andAE$, which meanbeginning of lineandend of line, respectively (but, not in a character class, of course). So the regex^funxwould find any line that begins with the lettersfun, while^fun>xwould find any line that begins with the wordfun. ^fun$xwould find any line that was exactlyfun.
Finally,^\s*fun\s*$xwould match any line thatfunexactly, but perhaps also had leading and/or trailing whitespace.
That's pretty much it. There are more complex things, some of which I'll mention in the list below, but even with these few simple constructs one can specify very detailed and complex patterns.
Let's summarize some of the special things in regular expressions:
Items that are basic units:: char any non-special character matches itself.
\char special chars, when proceeded by \, become non-special. . Matches any one character (except \n).
\n Newline
\t Tab.
\r Carriage Return.
\f Formfeed.
\d Digit. Just a short-hand for [0-9].
\w Word element. Just a short-hand for [0-9a-zA-Z_].
\s Whitespace. Just a short-hand for [\t \n\r\f].
\## \### Two or three digit octal number indicating a single byte.
[chars] Matches a character if it's one of the characters listed. [^chars] Matches a character if it's not one of the ones listed.; The \char items above can be used within a character class,
but not the items below.; \D Anything not \d.
\W Anything not \w.
\S Anything not \s.
\a Any ASCII character.
\A Any multibyte character.
\k Any (not half-width) katakana character (including 1/4).
\K Any character not \k (except \n).
\h Any hiragana character.
\H Any character not \h (except \n).
(regex) Parens make the regex one unit.
(?:regex) [from perl5] Grouping-only parens -- can't use for \# (below) \c Any JISX0208 kanji (kuten rows 16-84)
\C Any character not \c (except \n).
\# Match whatever was matched by the #th paren from the left.
Withto indicate oneunitas above, the following may be used:: ? A allowed, but not required.
+ At least one required, but more ok.
* Any number of ok, but none required.
There are also ways to matchsituations:: \b A word boundary.
< Same as \b.
> Same as \b.
^ Matches the beginning of the line.
$ Matches the end of the line.
Finally, theoris: reg1|reg2 Match if either reg1 or reg2 match.
Note that\kand the like aren't allowed in character classes, so something such as[\k\h]xto try to get all kana won't work. Use (\k|\h)xinstead.

BUGS

Needs full support for half-width katakana and JIS X 0212-1990.
Non-EUC (JIS & SJIS) items not tested well.
Probably won't work on non-UNIX systems.
Screen control codes (for clear and highlight commands) are hard-coded
for ANSI/VT100/kterm.

AUTHOR

Jeffrey Friedl (jfriedl@nff.ncl.omron.co.jp)

INFO

Jim Breen's text files edict and kanjidic and their documentation can be found inpub/nihongoon ftp.cc.monash.edu.au (130.194.1.106

Information on input and output encoding and codes can be found in Ken
Lunde's Understanding Japanese Information Processing (AE3/41/2) published by O'Reilly and Associates. ISBN 1-56592-043-0. There is also a
Japanese edition published by SoftBank.

A program to convert files among the various encoding methods is Dr. Ken Lunde'sjconv, which can also be found on ftp.cc.monash.edu.au. Jconv is also useful for converting halfwidth katakana (which lookup doesn't yet support well) to full-width.

docs.sk

comprehensive documentation repository

Most Viewed