pkg-config(1)

NAME

pkg-config - Return metainformation about installed libraries

SYNOPSIS

pkg-config  [--modversion] [--help] [--print-errors] [--silence-errors]
[--cflags] [--libs] [--libs-only-L]  [--libs-only-l]  [--cflags-only-I]
[--variable=VARIABLENAME]     [--define-variable=VARIABLENAME=VARIABLE-
VALUE] [--print-variables] [--uninstalled]  [--exists]  [--atleast-ver-
sion=VERSION]     [--exact-version=VERSION]     [--max-version=VERSION]
[--list-all]  [LIBRARIES...]    [--print-provides]   [--print-requires]
[--print-requires-private] [LIBRARIES...]

DESCRIPTION

The pkg-config program is used to retrieve information about installed libraries in the system. It is typically used to compile and link against one or more libraries. Here is a typical usage scenario in a Makefile:

program: program.c

cc program.c $(pkg-config --cflags --libs gnomeui)

pkg-config retrieves information about packages from special metadata files. These files are named after the package, and has a .pc extension. On most systems, pkg-config looks in and

for these files. It will additionally look in the colon-separated (on

Windows, semicolon-separated) list of directories specified by the PKG_CONFIG_PATH environment variable.

The package name specified on the pkg-config command line is defined to be the name of the metadata file, minus the .pc extension. If a library can install multiple versions simultaneously, it must give each version its own name (for example, GTK 1.2 might have the package name "gtk+" while GTK 2.0 has "gtk+-2.0").

OPTIONS

The following options are supported:

--modversion

Requests that the version information of the libraries specified on the command line be displayed. If pkg-config can find all the libraries on the command line, each library's version string is printed to stdout, one version per line. In this case pkgconfig exits successfully. If one or more libraries is unknown, pkg-config exits with a nonzero code, and the contents of stdout are undefined.

--help Displays a help message and terminates.

--print-errors

If one or more of the modules on the command line, or their dependencies, are not found, or if an error occurs in parsing a .pc file, then this option will cause errors explaining the problem to be printed. With "predicate" options such as "--exists" pkg-config runs silently by default, because it's usually used in scripts that want to control what's output. This option can be used alone (to just print errors encountered locating modules on the command line) or with other options. The PKG_CONFIG_DEBUG_SPEW environment variable overrides this option.

--silence-errors

If one or more of the modules on the command line, or their dependencies, are not found, or if an error occurs in parsing a a .pc file, then this option will keep errors explaining the problem from being printed. With "predicate" options such as "--exists" pkg-config runs silently by default, because it's usually used in scripts that want to control what's output. So this option is only useful with options such as "--cflags" or "--modversion" that print errors by default. The PKG_CONFIG_DEBUG_SPEW environment variable overrides this option.

--errors-to-stdout

If printing errors, print them to stdout rather than the default stderr

The following options are used to compile and link programs:

--cflags

This prints pre-processor and compile flags required to compile the packages on the command line, including flags for all their dependencies. Flags are "compressed" so that each identical flag appears only once. pkg-config exits with a nonzero code if it can't find metadata for one or more of the packages on the command line.

--cflags-only-I

This prints the -I part of "--cflags". That is, it defines the header search path but doesn't specify anything else.

--libs This option is identical to "--cflags", only it prints the link

flags. As with "--cflags", duplicate flags are merged (maintaining proper ordering), and flags for dependencies are included in the output.

--libs-only-L

This prints the -L/-R part of "--libs". That is, it defines the library search path but doesn't specify which libraries to link with.

--libs-only-l

This prints the -l part of "--libs" for the libraries specified on the command line. Note that the union of "--libs-only-l" and "--libs-only-L" may be smaller than "--libs", due to flags such as -rdynamic.

--variable=VARIABLENAME

This returns the value of a variable defined in a package's .pc file. Most packages define the variable "prefix", for example, so you can say:

$ pkg-config --variable=prefix glib-2.0
/usr/

--define-variable=VARIABLENAME=VARIABLEVALUE

This sets a global value for a variable, overriding the value in any files. Most packages define the variable "prefix", for example, so you can say:

$ pkg-config --print-errors --define-variable=prefix=/foo \

--variable=prefix glib-2.0

/foo

--print-variables

Returns a list of all variables defined in the package.

--uninstalled

Normally if you request the package "foo" and the package "foouninstalled" exists, pkg-config will prefer the "-uninstalled" variant. This allows compilation/linking against uninstalled packages. If you specify the "--uninstalled" option, pkg-config will return successfully if any "-uninstalled" packages are being used, and return failure (false) otherwise. (The PKG_CONFIG_DISABLE_UNINSTALLED environment variable keeps pkg-config from implicitly choosing "-uninstalled" packages, so if that variable is set, they will only have been used if you pass a name like "foo-uninstalled" on the command line explicitly.)

--exists

--atleast-version=VERSION

--exact-version=VERSION

--max-version=VERSION

These options test whether the package or list of packages on the command line are known to pkg-config, and optionally whether the version number of a package meets certain contraints. If all packages exist and meet the specified version constraints, pkg-config exits successfully. Otherwise it exits unsuccessfully.

Rather than using the version-test options, you can simply give a version constraint after each package name, for example:

$ pkg-config --exists 'glib-2.0 >= 1.3.4 libxml = 1.8.3'

Remember to use --print-errors if you want error messages.

--msvc-syntax

This option is available only on Windows. It causes pkg-config to output -l and -L flags in the form recognized by the Microsoft Visual C++ command-line compiler, cl. Specifically, instead of it prints /libpath:x/some/path, and instead of -lfoo it prints foo.lib. Note that the --libs output consists of flags for the linker, and should be placed on the cl command line after a /link switch.

--dont-define-prefix

This option is available only on Windows. It prevents pkg-config from automatically trying to override the value of the variable "prefix" in each .pc file.

--prefix-variable=PREFIX

Also this option is available only on Windows. It sets the name of the variable that pkg-config automatically sets as described above.

--static

Output libraries suitable for static linking. That means including any private libraries in the output. This relies on proper tagging in the .pc files, else a too large number of libraries will ordinarily be output.

--list-all

List all modules found in the pkg-config path.

-I "--print-provides"

List all modules the given packages provides.

--print-requires

List all modules the given packages requires.

--print-requires-private

List all modules the given packages requires for static linking (see --static).

ENVIRONMENT VARIABLES

PKG_CONFIG_PATH

A colon-separated (on Windows, semicolon-separated) list of directories to search for .pc files. The default directory will always be searched after searching the path; the default is libdir/pkgconfig:datadir/pkgconfig where libdir is the libdir for pkg-config and datadir is the datadir for pkg-config when it was installed.

PKG_CONFIG_DEBUG_SPEW

If set, causes pkg-config to print all kinds of debugging information and report all errors.

PKG_CONFIG_TOP_BUILD_DIR

A value to set for the magic variable pc_top_builddir which may appear in .pc files. If the environment variable is not set, the default value '$(top_builddir)' will be used. This variable should refer to the top builddir of the Makefile where the compile/link flags reported by pkg-config will be used. This only matters when compiling/linking against a package that hasn't yet been installed.

PKG_CONFIG_DISABLE_UNINSTALLED

Normally if you request the package "foo" and the package "foouninstalled" exists, pkg-config will prefer the "-uninstalled" variant. This allows compilation/linking against uninstalled packages. If this environment variable is set, it disables said behavior.

PKG_CONFIG_ALLOW_SYSTEM_CFLAGS

Don't strip -I/usr/include out of cflags.

PKG_CONFIG_ALLOW_SYSTEM_LIBS

Don't strip -L/usr/lib out of libs

PKG_CONFIG_SYSROOT_DIR

Modify -I and -L to use the directories located in target sysroot. this option is useful when crosscompiling package that use pkg-config to determine CFLAGS anf LDFLAGS. -I and -L are modified to point to the new system root. this means that a -I/usr/include/libfoo will become -I/var/target/usr/include/libfoo with a PKG_CONFIG_SYSROOT_DIR equal to /var/target (same rule apply to -L)

PKG_CONFIG_LIBDIR

Replaces the default pkg-config search directory, usually /usr/lib/pkgconfig

QUERYING PKG-CONFIG'S DEFAULTS

pkg-config can be used to query itself for the default search path, version number and other information, for instance using:

$ pkg-config --variable pc_path pkg-config

or

$ pkg-config --modversion pkg-config

WINDOWS SPECIALITIES

If a .pc file is found in a directory that matches the usual conventions (i.e., ends with \lib\pkgconfig or \share\pkgconfig), the prefix for that package is assumed to be the grandparent of the directory where the file was found, and the prefix variable is overridden for that file accordingly.

If the value of a variable in a .pc file begins with the original, nonoverridden, value of the prefix variable, then the overridden value of prefix is used instead.

AUTOCONF MACROS

PKG_CHECK_MODULES(VARIABLE-PREFIX, MODULES [,ACTION-IF-FOUND [,ACTIONIF-NOT-FOUND]])

The macro PKG_CHECK_MODULES can be used in configure.ac to check whether modules exist. A typical usage would be:

PKG_CHECK_MODULES([MYSTUFF], [gtk+-2.0 >= 1.3.5 libxml = 1.8.4])

This would result in MYSTUFF_LIBS and MYSTUFF_CFLAGS substitution variables, set to the libs and cflags for the given module list. If a module is missing or has the wrong version, by default configure will abort with a message. To replace the default action, specify an ACTION-IF-NOT-FOUND. PKG_CHECK_MODULES will not print any error messages if you specify your own ACTION-IF-NOT-FOUND. However, it will set the variable MYSTUFF_PKG_ERRORS, which you can use to display what went wrong.

Note that if there is a possibility the first call to PKG_CHECK_MODULES might not happen, you should be sure to include an explicit call to PKG_PROG_PKG_CONFIG in your configure.ac.

PKG_PROG_PKG_CONFIG([MIN-VERSION])

Defines the PKG_CONFIG variable to the best pkg-config available, useful if you need pkg-config but don't want to use PKG_CHECK_MODULES.

PKG_CHECK_EXISTS(MODULES, [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND])

Check to see whether a particular set of modules exists. Similar to PKG_CHECK_MODULES(), but does not set variables or print errors.

Similar to PKG_CHECK_MODULES, make sure that the first instance of this or PKG_CHECK_MODULES is called, or make sure to call PKG_CHECK_EXISTS manually.

METADATA FILE SYNTAX

To add a library to the set of packages pkg-config knows about, simply install a .pc file. You should install this file to libdir/pkgconfig.

Here is an example file:
# This is a comment
prefix=/home/hp/unst # this defines a variable
exec_prefix=${prefix} # defining another variable in terms of the first libdir=${exec_prefix}/lib
includedir=${prefix}/include

Name: GObject # human-readable name
Description: Object/type system for GLib # human-readable description
Version: 1.3.1
URL: http://www.gtk.org
Requires: glib-2.0 = 1.3.1
Conflicts: foobar <= 4.5
Libs: -L${libdir} -lgobject-1.3
Libs.private: -lm
Cflags: -I${includedir}/glib-2.0 -I${libdir}/glib/include

You would normally generate the file using configure, of course, so that the prefix, etc. are set to the proper values.

Files have two kinds of line: keyword lines start with a keyword plus a colon, and variable definitions start with an alphanumeric string plus an equals sign. Keywords are defined in advance and have special meaning to pkg-config; variables do not, you can have any variables that you wish (however, users may expect to retrieve the usual directory name variables).

Note that variable references are written "${foo}"; you can escape literal "${" as "$${".

Name: This field should be a human-readable name for the package. Note

that it is not the name passed as an argument to pkg-config.

Description:

This should be a brief description of the package

URL: An URL where people can get more information about and download

the package

Version:

This should be the most-specific-possible package version string.

Requires:

This is a comma-separated list of packages that are required by your package. Flags from dependent packages will be merged in to the flags reported for your package. Optionally, you can specify the version of the required package (using the operators =, <, >, >=, <=); specifying a version allows pkg-config to perform extra sanity checks. You may only mention the same package one time on the Requires: line. If the version of a package is unspecified, any version will be used with no checking.

Requires.private:

A list of packages required by this package. The difference from Requires is that the packages listed under Requires.private are not taken into account when a flag list is computed for dynamically linked executable (i.e., when --static was not specified). In the situation where each .pc file corresponds to a library, Requires.private shall be used exclusively to specify the dependencies between the libraries.

Conflicts:

This optional line allows pkg-config to perform additional sanity checks, primarily to detect broken user installations. The syntax is the same as Requires: except that you can list the same package more than once here, for example "foobar = 1.2.3, foobar = 1.2.5, foobar >= 1.3", if you have reason to do so. If a version isn't specified, then your package conflicts with all versions of the mentioned package. If a user tries to use your package and a conflicting package at the same time, then pkgconfig will complain.

Libs: This line should give the link flags specific to your package.

Don't add any flags for required packages; pkg-config will add those automatically.

Libs.private:

This line should list any private libraries in use. Private libraries are libraries which are not exposed through your library, but are needed in the case of static linking. This differs from Requires.private in that it references libraries that do not have package files installed.

Cflags:

This line should list the compile flags specific to your package. Don't add any flags for required packages; pkg-config will add those automatically.

AUTHOR

pkg-config was written by James Henstridge, rewritten by Martijn van Beers, and rewritten again by Havoc Pennington. Tim Janik, Owen Taylor, and Raja Harinath submitted suggestions and some code. gnome-config was written by Miguel de Icaza, Raja Harinath and various hackers in the GNOME team. It was inspired by Owen Taylor's gtk-config program.

BUGS

pkg-config does not handle mixing of parameters with and without = well. Stick with one.

Bugs can be reported at http://bugs.freedesktop.org/ under the pkg-config component.

pkg-config(1)