WMTUXTIME(1x)
NAME
wmtuxtime - view battery status and set power saving options on a
Toshiba laptop
SYNOPSIS
wmtuxtime [ -cnhv ]
DESCRIPTION
wmTuxTime is a small WindowMaker/Enlightment/AfterStep dockable applet
for displaying the battery status and setting the power saving options
on Toshiba laptops.
As well as monitoring the main battery you can also view the status of
any addtional battery installed in the SelectBay. There are also user
configurable battery alarms to warn of low power.
The main window contains a digital time remaining display, a bar graph
showing the remaining battery percentage, a digital percent remaining
display and an icon to indicate the power source. When running on the
battery the time remaining display indicates the estimated time till
the battery is flat in hours and minutes. When connected to the mains
and the battery is charging the red C in the corner comes on and the
time is an estimate of the time till the battery reaches full charge.
When fully charged and on the mains it indicates the estimated battery
life if you where to switch to batteries.
The battery bar graph changes from green to yellow on reaching the low
battery status, and red on reaching the critical battery status. When a
battery is installed.
The functions of the four buttons along the botton of the applet in
order left to right are:
- Arrow switch between the displaying the main battery, SelectBay bat
- tery and combined total if a battery is installed in the SelectBay
- Zzz's Starts a suspend sequence, regardless of the current power up
- setting.
- Bell Set the low and critical battery warning alarms.
- Spanner
- Call tuxtime-conf to set the battery save options
OPTIONS
- -c, --contrast
- Use alternative colours that improves the contrast of the display. This is particularly useful on low contrast displays such as DSTN, or if you are running with the backlight on a low setting.
- -n, --normal
- Have normal window decorations. This should enable the program to be docked in an AfterStep or Enlightment dock bar. It also enables makes some window manages take heed of the geometry option.
- -display,
- Specify which X server to display the program on.
- -geometry
- Specify some hints on the window position using standard Xt geometry option. It should be noted that size arguments are ignored.
- -h, --help
- Display a short help message and exit.
- -v, --version
- Print the version number and exit.
BUGS
On recent models setting the HDD Auto off and Display Auto Off functions do not work.
AUTHOR
This program was written by Jonathan Buzzard (jonathan@buzzard.org.uk)
and may be freely distributed under the terms of the GNU General Public
License. There is ABSOLUTELY NO WARRANTY for this program.