ng_bt3c(4)

NAME

#include <sys/types.h>
#include <netgraph/bluetooth/include/ng_bt3c.h>

The btccc node type is both a persistent Netgraph node type
and a driver for the 3Com Bluetooth PC card (3CRWB6096-HP). It imple
ments a Bluetooth HCI UART transport layer as per chapter H4 of the Bluetooth
Specification Book v1.1. A new node is created when the card is plugged.
In order to use the card one MUST download the firmware
first. Due to copyright issues the firmware cannot be provided with this
driver. The firmware can be obtained from the Windows driver package
that can be downloaded from the 3Com web site at no charge. The
firmware name is BT3CPCC.BIN. To load the firmware into the card, use
bt3cfw(8). I am using the original firmware that came with the card on CD
ROM.: MD5 (BT3CPCC.BIN) = 36170fda56ea9fdbf1702c966f8a97f1
For OLDCARD systems the entry in pccard.conf(5) might look
like this:: # 3Com 3CRWB60-A Bluetooth PC Card
card "3COM" "3CRWB60-A" "Bluetooth PC Card"
config auto "btccc" ?
insert /usr/sbin/bt3cfw -n $device -f

/etc/BT3CPCC.bin
Do not forget to load the module and SIGHUP pccardd(8).
The node has a single hook called hook. Incoming bytes re
ceived on the device are re-assembled into HCI frames (according to the
length). Full HCI frames are sent out on the hook. HCI frames received on
hook are transmitted out. No modification to the data is performed
in either direction.

This node type supports the following hooks:

hook single HCI frame contained in single mbuf structure.

This node type supports the generic control messages, plus
the following:
NGM_BT3C_NODE_GET_STATE: Returns the current receiving state for the node.
NGM_BT3C_NODE_GET_DEBUG: Returns an integer containing the current debug lev; el for the
node.
NGM_BT3C_NODE_SET_DEBUG: This command takes an integer argument and sets the; current debug
level for the node.
NGM_BT3C_NODE_GET_QLEN: This command takes a parameter that specifies queue; number and
returns the current length of the queue for the; node.
NGM_BT3C_NODE_SET_QLEN: This command takes two parameters that specify the; queue number
and the maximum length of the queue and sets the; maximum length
of the queue for the node.
NGM_BT3C_NODE_GET_STAT: Returns various statistic information for the node,; such as: number of bytes (frames) sent, number of bytes (frames); received and
number of input (output) errors.
NGM_BT3C_NODE_RESET_STAT: Reset all statistic counters to zero.
NGM_BT3C_NODE_DOWNLOAD_FIRMWARE: Download card firmware.

The btccc node type was implemented in FreeBSD 5.0.

Maksim Yevmenkin <m_evmenkin@yahoo.com>