CFINGERD.CONF(5)
NAME
cfingerd.conf - configurable finger daemon configuration file.
SYNOPSIS
/etc/cfingerd.conf
DESCRIPTION
cfingerd.conf is the configuration file for cfingerd. cfingerd has
been totally rewritten to support a more readable configuration file.
This version of the new configuration file is NOT compatible with the
older versions from 1.0.3 or below.
The configuration file is split into sections of three general types:
FILES, CONFIG, and HOSTS.
Each one of those sections is split into subsections, which will be
explained next.
Subtext of each option is either boolean options, string options, or
switchable options, all changeable by the system administrator.
Each section is split into a series of sections that resembles C type
definition; not exact, but close enough to be familiar with it. :)
There's only one exception - these are not case sensitive. Any casing
will do, as long as the option is legal.
- Thus, each section is formatted like this:
- OPTION section_name = {
(tab/space) string_option = "string_format",
(tab/space) +/-boolean_pair_option = [BOOL, BOOL],
(tab/space) +/-internal_config_option
(tab/space) host.name.here - }
- This illustrates that string options are strings put into "quotes", boolean options are given as TRUE and FALSE, switchable options are given with the + or - directive, and hostnames are used as substrings, so that wildcards are not necessary.
- A few sections simply contain a block of text to be used as the value of a single option, which one is indicated by the section name itself.
- You may add comments using the hash mark ``#'' at the beginning of the line. Please note that no comments are allowed inside of a section.
DISPLAY FILES SECTION (FILES display_files)
Each option here is a string option. The first 6 options are relative
to the home directory of whatever user was fingered, the remaining are
absolute and should start with a "/".
PLAN is the optional plan file which contains the text displayed as the
users plan. The default is .plan.
PROJECT is the optional project file that is used when displaying a
project description. The standard here is .project.
PGP_KEY is the optional "Pretty-Good-Privacy" file that is shown when displaying a public or private key. The standard here is .pgpkey.
XFACE is the optional file that shows the user's face. (This is commonly used in E-Mail messages.) The standard here is .xface.
NO_FINGER is the optional file that is shown when a user wishes to
remain anonymous. This is usually the case with root users (which
should be standard, anyway). In order to hide the user this file
should be an exact copy of the nouser_banner.txt file. The standard
here is .nofinger. This file can only be a standard displayable file.
This option will also hide the user from a "search.pattern" query. If
any user can read this file it will also be honored by a userlist
(@host) query. This is done by a non-priviliged program so the uid
can't be changed.
USERLOG is the optional file in which all attempts to finger a user are
logged for the users own reference. If ALLOW_USERLOG is not enabled
this file is completely ignored. If ONLY_CREATE_FINGERLOG_IF_FILE_EXISTS is enabled cfingerd will only document finger
requests if this file already exists in the users home directory. The
default name is .fingerlog.
MAILBOX is the file that is checked to see where the user's mailbox is.
If you are using a regular Unix mail transport agent (such as sendmail(1), smail(1) or exim(1)),youwoulduse /usr/spool/mail/$USER here.
If you are using something like qmail, you would use $HOME/Mailbox.
The path must be given as well as the filename to check for. $USER
will expand to the proper username. $HOME will expand to the proper
home directory for that very user. If MAILBOX is set to``QMAIL'' cfingerd assumes that Qmail is used on the local system and therefore will
read ~/.qmail files instead of common mailbox files.
LOGFILE is the file that is used to keep logs of everything that happens to your finger program. These logs are kept as backups for your
finger file, and can be used to guard against attacks against your system if a finger attack occurs. By keeping cfingerd.conf readable only
by root the logfile should be kept in a safe, hidden place.
HEADER_DISPLAY is the file that is displayed at the top of each finger reply. The standard here is /etc/cfingerd/top_finger.txt.
FOOTER_DISPLAY is the file that is displayed at the end of each finger reply. The standard here is /etc/cfingerd/bottom_finger.txt.
NO_USER_BANNER is the file that is displayed if the user doesn't exist. The standard here is /etc/cfingerd/nouser_banner.txt.
NO_NAME_BANNER is the file that is displayed if no name was specified
in a finger request if a system listing is not allowed by the SYSTEM_LIST option (explained later). The standard here is /etc/cfingerd/noname_banner.txt.
REJECTED_BANNER is the file that is displayed if a rejected host tries to finger your system for any reason. The standard here is /etc/cfingerd/rejected_banner.txt.
FINGER DISPLAY CONFIGURE SECTION (CONFIG finger_display)
Each option in this section is boolean. The way this works is as follows: The first boolean option is the setting for a remote host, or a
host that fingers you from the outside. The second boolean option is
the setting for the local host, or trusted host. This is what people
from your own system will see.
TRUE means that this item is included in the cfingerd reply. FALSE
means it is omitted. Unless otherwise specified these items only
appear if an existing user is fingered.
Each option has a "-" or "+" option. This is for user-overridable
options, which will be in the next release of cfingerd. These will
allow each user to manipulate if this information is displayed when
that specific user is fingered.
HEADER_FILE displays the header file at the beginning of each finger
reply.
FOOTER_FILE displays the footer file at the end of each finger reply.
LOGIN_ID displays the login ID of that particular user.
REAL_NAME displays the real name of that particular user.
DIRECTORY displays the user's directory.
SHELL displays the user's shell.
ROOM_NUMBER displays the user's room number.
WORK_NUMBER displays the user's work phone number.
HOME_NUMBER displays the user's home phone number.
OTHER displays the user's other information.
LAST_TIME_ON displays the last time the user has logged into the fingered system.
IF_ONLINE displays whether or not the user is currently logged into the
fingered system.
TIME_MAIL_READ displays the last time that the fingered user has read
mail.
DAY_MAIL_READ displays the last day that the fingered user read his/her
mail.
ORIGINATION displays the site from which the user logged in (if applicable.)
PLAN displays the user's plan file.
PROJECT displays the user's project file.
PGP displays the user's Pretty-Good-Privacy key file.
XFACE displays the user's XFACE file.
NO_NAME_BANNER displays the banner if no username was given.
REJECTED_BANNER displays the rejected banner file if the site fingering
your system was in the banned-site listing.
SYSTEM_LIST displays the system list if one was requested.
NO_NAME displays the NO_USER_BANNER file if no user was selected.
INTERNAL CONFIG SECTION (CONFIG internal_config)
Each item in this section is a switchable option. This means that a
"+" before the item enables it while a "-" before the item turns it
off.
ALLOW_MULTIPLE_FINGER_DISPLAY tells cfingerd to add the system finger
information from the hosts listed in the system_list_sites instead of
only the localhost. This is useful when you have more than one ISP
machine, located in different cities, or even states.
ALLOW_SEARCHABLE_FINGER allows you to let others outside of your system
(or within it) to search for a specific username by using the
"search.pattern" directive.
ALLOW_NO_IP_MATCH_FINGER allows you to let sites finger your system if
a hostname could not be matched to their IP address successfully.
ALLOW_USER_OVERRIDE will allow your users to override specific options
in the FINGER DISPLAY section that you enable. This is not yet implemented.
ALLOW_USERLIST_ONLY will allow other sites to get a shortened form of
the "finger @hostname" response by issuing "finger userlist-only@hostname". The shortened form does not merge in other computers even if
ALLOW_MULTIPLE_FINGER_DISPLAY is enabled, and omits the usual headers
and footers. This listing is only available if the remote user is
allowed to query for a regular system list, so SYSTEM_LIST from the
finger_display section needs to be enabled, too.
ALLOW_FINGER_FORWARDING will allow other sites to forward finger requests to a different machine if the user could not be located on the current machine. (In order to use this option, you MUST have the HOSTS finger_forward option set, and have other sites in there.)
ALLOW_STRICT_FORMATTING makes the finger display remove all returns
between display options. This makes the finger display look horrible
(as with GNU Finger or the other generic fingers) and makes your system
look, well, "generic". :)
ALLOW_VERBOSE_TIMESTAMPING makes the timestamp that is displayed (at
any place) very verbose. For instance, where it used to say:
On since Sat Aug 12 03:43PM (PDT)
would now be shown as:
On since Sat Aug 12, 1995 03:43PM (PDT)
(Basically, ALLOW_VERBOSE_TIMESTAMPING just takes up more room on the
display field.)
ALLOW_NONIDENT_ACCESS lets cfingerd also accept connections from sites
that don't run the IDENT daemon (or RFC1413-compliant program.) This
is for security sake, and is a good measure against unknown users trying to finger your system. If this option is enabled, users that do
not have identd running on their system (ala Windows users) will be
able to finger your system. Systems NOT running identd will return
"unknown" as the user ID, and will thusly not be permitted to finger a
user on your system.
ALLOW_FINGER_LOGGING enables cfingerd to use the LOGFILE file to store
any logs of activity that happen to your system via finger.
ALLOW_LINE_PARSING makes cfingerd parse each line of every display file
(including the plan, project, and pgp files) for any cfingerd-specific
"$" commands. If any are found, cfingerd will parse these commands and
display correct information accordingly. Otherwise, if this is turned
off, the display will appear without parsed commands.
ALLOW_EXECUTION will allow users to execute scripts in place of their
.plan, .project, and .pgp files. This is used to display the standard
output of another program directly to the screen of the user. Keep in
mind that this is a HUGE security risk, should you choose to use it.
It's normally suggested that this remain off, but you can turn it on if
necessary. Nevertheless these programs are called as nobody.nogroup as
effective user (while the real user will still be root, but a called
program won't be able to change this back).
ALLOW_FAKEUSER_FINGER turns on or off the fake user option in cfingerd.
If you want fake users to be defined, and available to be fingered, you
will want to enable this option. This can be a security risk in some
instances if you allow for searchable fingers, and your script calls an
execute routine on that variable... But chances are, that'll never
happen.
ALLOW_USERLOG will allow users to keep track of who has fingered them, and at what time. The default name of this user logfile is .fingerlog.
ALLOW_CONFESSION enables two fakeusers "help" and "version" that provide information about the system running. Some people don't like that
so you can turn it off. When fingered the requestor will only see the
NO_USER_BANNER so he can't guess that the fakeuser is supported.
ONLY_SHOW_HEADERS_IF_FILE_EXISTS will only show the header of the
.plan, .project, etc. files if they exist. If the file doesn't exist,
the header will not be shown. This saves space on the final output of
the finger data.
ONLY_CREATE_FINGERLOG_IF_FILE_EXISTS will only create a .fingerlog file
in the fingered user's home directory if one exists (and is
read/writable by the user.) This is to cut down on hard drive space if
they don't want a .fingerlog file.
SYSTEM LIST SITES SECTION (CONFIG system_list_sites)
This is just a series of hostnames that you want to finger when displaying a userlist query (finger @localhost) . If you have more than
one system that you want to show, simply put their hostnames in this
list, separated on a line by itself.
- A good example of the way this works is this: If you have a separate
ISP system that you are running on the side, say "chatlink.com", then I
would change my configuration to say:
- CONFIG system_list_sites = {
chatlink.com,
localhost - }
- Remember, if you are listing only a couple of sites, list the sites you will want to have listed (in order) first. These sites are required to run cfingerd as well and they must not be offline while fingering. The ending entry MUST be the localhost, or the finger listing will not include your site. If you include localhost anywhere else in the list, it will stop once it has reached the localhost entry, so remember to list it last!
- For the simple fact that I want to get a user listing from my own machine, and from chatlink.com's system. This would be automatically formatted nicely (ie. sorted and parsed) and would display on the screen in sorted order. This program is usually used in tandem with the supplied userlist(1) program.
- If no system list sites are specified, multiple system sites will not be specified.
TRUSTED HOST SECTION (HOSTS trusted)
This is a listing of the sites that you allow to finger your system
exclusively, giving them the same access that your local users would
get. In other words, they are treated as "localhost" users.
Each site that you list in this section should be separated by using
the "," character. You can include up to 80 sites in this listing.
Wildcards are supported in this section, and you may use them in the
regex format as well. Any wildcards with "*", "?", or any other regex
wildcard matching character will work. IP addresses will also work.
Hostnames are compared case insensitive.
REJECTED HOST SECTION (HOSTS rejected)
This is a listing of the sites that you do not allow to finger your
system. These sites don't get to finger anyone (or anything for that
matter) on your system, regardless of what they try to do. In essence,
finger is cut off to those particular systems.
Each site that you list in this section should be separated by using
the "," character. You can include up to 80 sites in this listing.
Wildcards are supported in this section, and you may use them in the
regex format as well. Any wildcards with "*", "?", or any other regex
wildcard matching character will work. IP addresses will also work.
Hostnames are compared case insensitive.
FORWARDED HOST SECTION (HOSTS finger_forward)
This is a listing of sites that are used to forward a finger query to
when a finger request was processed, but that particular user was not
found on the associated system. It will step through this listing, and
it will search for the user in question. If the user could not be
found, then it will step through to the next host, and the next, until
it finds one.
Each site that you list in this section should be separated by using
the "," character. You can include up to 80 sites in this listing.
Wildcards are supported in this section, and you may use them in the
regex format as well. Any wildcards with "*", "?", or any other regex
wildcard matching character will work. Hostnames are compared case
insensitive.
If you do not specify any forwarding sites in this section, finger forwarding will be disabled for your system.
FINGER STRINGS SECTION (CONFIG finger_strings)
Each option in this section is a string that can be changed to fit your
needs when displaying finger information. These strings are limited to
about 20 characters on the display. (If you use more than 20, the finger display will end up looking strange.)
USER_NAME is the string that is displayed when the user's username is
shown.
REAL_NAME is the string that is displayed when the user's real name is
shown.
DIRECTORY is the string that is displayed when the user's directory is
shown.
SHELL is the string that is displayed when the user's shell is shown.
ROOM_NUMBER is the string that is displayed when the user's room number
is shown.
WORK_NUMBER is the string that is displayed when the user's work phone
number is shown.
HOME_NUMBER is the string that is displayed when the user's home phone
number is shown.
OTHER is the string that is displayed when the user's other display
information is show.
PLAN is the string that is displayed when the user's plan is shown.
PROJECT is the string that is displayed when the user's project is
shown.
PGPKEY is the string that is displayed when the user's PGP Key is
shown.
XFACE is the string that is displayed when the user's XFACE file is
shown.
NO_PLAN is the string that is displayed if the user doesn't have a plan file to show you and ONLY_SHOW_HEADERS_IF_FILE_EXISTS is not enabled.
NO_PROJECT is the string that is displayed if the user doesn't have a
project file to show you and ONLY_SHOW_HEADERS_IF_FILE_EXISTS is not
enabled.
NO_PGP is the string that is displayed if the user doesn't have a PGP
Key file to show you and ONLY_SHOW_HEADERS_IF_FILE_EXISTS is not
enabled.
NO_XFACE is the string that is displayed if the user doesn't have an
xface file to show you and ONLY_SHOW_HEADERS_IF_FILE_EXISTS is not
enabled.
WAIT is the string that is shown when the system gathers information
from other sites for a user listing.
INTERNAL STRINGS SECTION (CONFIG internal_strings)
These strings are changeable, and can be any length you want (within
reason). These strings are concattenated into the syslogging display
when the appropriate finger has been issued. This section also
includes error messages that may occur.
NO_IP_HOST is shown when there is no hostname that matches the incoming
IP address. This usually indicates that either the site didn't register their IP address with the InterNIC, or they are coming from a
hacked site.
RENICE_FATAL is shown when the system failed to change the execution
priority on the current process of cfingerd.
STDIN_EMPTY is shown when the input buffer on the CFINGERD port is
empty. (This should never really happen; it's here for sanity.)
TRUSTED_HOST is shown when a trusted host fingers your system. If you
do not specify a trusted host, cfingerd will insert "localhost" into
this field.
REJECTED_HOST is shown when a rejected host fingers your system. If
you do not specify a rejected host, cfingerd will insert "0.0.0.0" into
this field.
ROOT_FINGER is shown when a user fingers root.
SERVICE_FINGER is shown when a user requests fake user services from
your system.
USER_LIST is shown when a user requests a system user listing from your
system.
FAKE_USER is shown when a user fingers a fake user from your system.
WHOIS_USER is shown when a user fingers a user with a "WHOIS" query.
(This option is not yet available at the time of this writing.)
FINGER_DENY is shown when a user tries to finger with a forward request
like user@host1@host2. This is not supported as it could result in finger loops and lots of traffic.
SIGNAL STRINGS CONFIGURE SECTION (CONFIG signal_strings)
This section is used in changing the output that is given when a system
crashes, or a signal is caught, and reported to the finger output.
The supported caught signals are as follows:
SIGHUP, SIGINT, SIGQUIT, SIGILL, SIGTRAP, SIGABRT, SIGFPE, SIGUSR1,
SIGSEGV, SIGUSR2, SIGPIPE, SIGALRM, SIGTERM, SIGCONT, SIGTSTP, SIGTTIN,
SIGTTOU, SIGIO, SIGXCPU, SIGXFSZ, SIGVTALRM, SIGPROF, SIGWINCH
FINGER PROGRAMS FILES SECTION (FILES finger_programs)
These are the programs that are called when a specific action is take
on the finger display.
FINGER is the file that is used when a system user listing is requested
from your machine. This is used in the standard user list and in the
sorted user list, so it is wise to use the standard here; this being
/usr/sbin/userlist.
WHOIS is the program that is used when a "whois" request is done on a
specific user. This is currently not used.
FINGER FAKEUSERS FILES SECTION (FILES finger_fakeusers)
These are the ever-popular fake users that you can create on your system. These users are ones that don't exist (and should not, for that
matter.) These are, instead, treated as normal scripts that can be
called for your use.
- The format is as follows for fake users:
- "fake_username", "Script name", SEARCHBOOL, "script"
- where...
- fake_username is the name of the fake user you want to request. Make sure that this is a user that DOES NOT exist on your system. Keep in mind that if you create a fake username, and that user already exists, the fake username will be shown. If you prepend '-' before the username, the fake user will not be shown on the list of services.
- Script name is the standard name of your script. This is used in the display of your services listing.
- SEARCHBOOL specifies whether or not parameters can be sent to that specific fake user. If you decide to use the SEARCHBOOL option (ie. TRUE in this case), the passed variables are:
$1 - First passed option,
$2 - Second passed option,
$3 - Third passed option, and
$4 - Fourth passed option.- (If more than four options were passed to this, the request will be ignored, and an error message will be returned to the user that requested the finger request.)
- script is the location of your script. It should be chmod 700 and readable only by root.
- If you do not specify any fake users, a fake user called "None" will be created. This is a fake user that does nothing, and calls "/dev/null" for the script.
SERVICES HEADER CONFIGURE SECTION (CONFIG services_header)
This is the display that is given during a services finger. It should
be formatted the same way that you want it to display on the screen.
When specifying the finger formatted options, you should specify them
as C formatted strings as well, with the standard options. This should
always be given last in the display.
- An example of this would be:
- Welcome to this system's services!
- User: Service name: Searchable:
- -------- -------------------- -----------%-8s %-20s %-s
- Where this would display the above string. Remember to keep the format string last, or a SIGSEGV will result.
SERVICES POSITIONS CONFIGURE SECTION (CONFIG services_positions)
This specifies where in the above display string that the information
from a service listing is to go. These numbers can be anywhere between
1 and 3.
USER specifies the position of the username listing.
SERVICE specifies the position of the service full-name listing.
SEARCH specifies the position of the boolean search display.
CONTACTING
If you like the software, and you want to learn more about the software, or want to see a feature added to it that isn't already here,
then please write to cfingerd@infodrom.north.de. The project's webpage
is at http://www.infodrom.north.de/cfingerd/ .
As always, I appreciate any suggestions, or bug reports you may have,
so if you have suggestions or bug reports, BRING 'EM ON! :)