shorewall6-zones(5)

NAME

zones - Shorewall6 zone declaration file

SYNOPSIS

/etc/shorewall6/zones

DESCRIPTION

The /etc/shorewall6/zones file declares your network zones. You specify the hosts in each zone through entries in /etc/shorewall6/interfaces or /etc/shorewall6/hosts.

The columns in the file are as follows.

ZONE - zone[:parent-zone[,parent-zone]...]: Name of the zone. The names "all", "none", "SOURCE" and "DEST" are reserved and may not be used as zone names. The maximum length of a zone name is determined by the setting of the LOGFORMAT option in
shorewall6.conf[1](5). With the default LOGFORMAT, zone names can be at most 5 characters long. The maximum length of an iptables
log prefix is 29 bytes. As explained in shorewall6.conf[2] (5), the default LOGPREFIX formatting string is "Shorewall:%s:%s:" where the first %s is replaced by the chain name and the second is replaced
by the disposition.; o The default formatting string has 12 fixed characters
("Shorewall" and three colons).; o The longest of the standard dispositions are ACCEPT and REJECT
which have 6 characters each.; o The canonical name for the chain containing the rules for
traffic going from zone 1 to zone 2 is "<zone 1>2<zone 2>".; o So if M is the maximum zone name length, such chains can have
length 2*M + 1.

12 + 6 + 2*M + 1 = 29 which reduces to

2*M = 29 - 12 - 6 - 1 = 10 or

M = 5

The order in which Shorewall6 matches addresses from packets to
zones is determined by the order of zone declarations. Where a zone is nested in one or more other zones, you may either ensure that
the nested zone precedes its parents in this file, or you may
follow the (sub)zone name by ":" and a comma-separated list of the parent zones. The parent zones must have been declared in earlier
records in this file. See shorewall6-nesting[3](5) for additional information.

Example:

#ZONE TYPE OPTIONS IN OPTIONS OUT OPTIONS a ipv6
b ipv6
c:a,b ipv6

Currently, Shorewall6 uses this information to reorder the zone
list so that parent zones appear after their subzones in the list. The IMPLICIT_CONTINUE option in shorewall6.conf[1](5) can also create implicit CONTINUE policies to/from the subzone.

In the future, Shorewall6 may make additional use of nesting
information.; TYPE

ipv6
This is the standard Shorewall6 zone type and is the default if you leave this column empty or if you enter "-" in the column. Communication with some zone hosts may be encrypted. Encrypted hosts are designated using the 'ipsec'option in
shorewall6-hosts[4](5).

ipsec

Communication with all zone hosts is encrypted. Your kernel and ip6tables must include policy match support.

firewall

Designates the firewall itself. You must have exactly one
'firewall' zone. No options are permitted with a 'firewall'
zone. The name that you enter in the ZONE column will be stored in the shell variable $FW which you may use in other
configuration files to designate the firewall zone.

bport (or bport6)

The zone is associated with one or more ports on a single
bridge.
OPTIONS, IN OPTIONS and OUT OPTIONS - [option[,option]...]: A comma-separated list of options. With the exception of the mss option, these only apply to TYPE ipsec zones.; reqid=number
where number is specified using setkey(8) using the 'unique:number option for the SPD level.; spi=<number>
where number is the SPI of the SA used to encrypt/decrypt packets.; proto=ah|esp|ipcomp
IPSEC Encapsulation Protocol; mss=number
sets the MSS field in TCP packets. If you supply this option,
you should also set FASTACCEPT=No in shorewall6.conf[1](5) to insure that both the SYN and SYN,ACK packets have their MSS
field adjusted.; mode=transport|tunnel
IPSEC mode; tunnel-src=address[/mask]
only available with mode=tunnel; tunnel-dst=address[/mask]
only available with mode=tunnel; strict
Means that packets must match all rules.; next
Separates rules; can only be used with strict; The options in the OPTIONS column are applied to both incoming and outgoing traffic. The IN OPTIONS are applied to incoming traffic
(in addition to OPTIONS) and the OUT OPTIONS are applied to
outgoing traffic.; If you wish to leave a column empty but need to make an entry in a following column, use "-".

FILES

/etc/shorewall6/zones

NOTES

1. shorewall6.conf: shorewall6.conf.html; 2. shorewall6.conf
shorewall.conf.html; 3. shorewall6-nesting
shorewall6-nesting.html; 4. shorewall6-hosts
shorewall6-hosts.html

docs.sk

comprehensive documentation repository

See also