smokeping_config(5)
NAME
smokeping_config - Reference for the SmokePing Config File
OVERVIEW
SmokePing takes its configuration from a single central configuration
file. Its location must be hardcoded in the smokeping script and
smokeping.cgi.
The contents of this manual is generated directly from the
configuration file parser.
The Parser for the Configuration file is written using David Schweikers
Config::Grammar module. Read all about it in Config::Grammar.
The Configuration file has a tree-like structure with section headings
at various levels. It also contains variable assignments and tables.
Warning: this manual is rather long. See smokeping_examples for simple
configuration examples.
REFERENCE
GENERAL SYNTAX
The text below describes the general syntax of the SmokePing
configuration file. It was copied from the Config::Grammar
documentation.
'#' denotes a comment up to the end-of-line, empty lines are allowed
and space at the beginning and end of lines is trimmed.
'\' at the end of the line marks a continued line on the next line. A
single space will be inserted between the concatenated lines.
'@include filename' is used to include another file.
'@define a some value' will replace all occurences of 'a' in the
following text with 'some value'.
Fields in tables that contain white space can be enclosed in either "'"
or """. Whitespace can also be escaped with "\". Quotes inside quotes
are allowed but must be escaped with a backslash as well.
SPECIFIC SYNTAX
The text below describes the specific syntax of the SmokePing
configuration file.
*** General *** (mandatory section)
General configuration values valid for the whole SmokePing setup.
The following variables can be set in this section:
- owner (mandatory setting)
- Name of the person responsible for this smokeping installation.
- imgcache (mandatory setting)
- A directory which is visible on your webserver where SmokePing can cache graphs.
- imgurl (mandatory setting)
- Either an absolute URL to the imgcache directory or one relative to the directory where you keep the SmokePing cgi.
- datadir (mandatory setting)
- The directory where SmokePing can keep its rrd files.
- dyndir
- The base directory where SmokePing keeps the files related to the
DYNAMIC function. This directory must be writeable by the WWW
server. It is also used for temporary storage of slave polling
results by the master in the master/slave mode. - If this variable is not specified, the value of "datadir" will be
used instead. - pagedir
- Directory to store static representations of pages.
- piddir (mandatory setting)
- The directory where SmokePing keeps its pid when daemonised.
- sendmail
- Path to your sendmail binary. It will be used for sending mails in connection with the support of DYNAMIC addresses.
- offset
- If you run many instances of smokeping you may want to prevent them
from hitting your network all at the same time. Using the offset
parameter you can change the point in time when the probes are run. Offset is specified in % of total interval, or alternatively as
'random'. I recommend to use 'random'. Note that this does NOT
influence the rrds itself, it is just a matter of when data
acqusition is initiated. The default offset is 'random'. - smokemail (mandatory setting)
- Path to the mail template for DYNAMIC hosts. This mail template
must contain keywords of the form <##keyword##>. There is a sample template included with SmokePing. - cgiurl (mandatory setting)
- Complete URL path of the SmokePing.cgi
- mailhost
- Instead of using sendmail, you can specify the name of an smtp
server and use perl's Net::SMTP module to send mail (for alerts and DYNAMIC client script). Several comma separated mailhosts can be
specified. SmokePing will try one after the other if one does not
answer for 5 seconds. - snpphost
- If you have a SNPP (Simple Network Pager Protocol) server at hand, you can have alerts sent there too. Use the syntax snpp:someaddress to use a snpp address in any place where you can use a mail address otherwhise.
- contact (mandatory setting)
- Mail address of the person responsible for this smokeping
installation. - display_name
- What should the master host be called when working in master/slave mode. This is used in the overview graph for example.
- syslogfacility
- The syslog facility to use, eg. local0...local7. Note: syslog
logging is only used if you specify this. - syslogpriority
- The syslog priority to use, eg. debug, notice or info. Default is info.
- concurrentprobes
- If you use multiple probes or multiple instances of the same probe
and you want them to run concurrently in separate processes, set
this to 'yes'. This gives you the possibility to specify probespecific step and offset parameters (see the 'Probes' section) for each probe and makes the probes unable to block each other in cases of service outages. The default is 'yes', but if you for some
reason want the old behaviour you can set this to 'no'. - changeprocessnames
- When using 'concurrentprobes' (see above), this controls whether
the probe subprocesses should change their argv string to indicate their probe in the process name. If set to 'yes' (the default),
the probe name will be appended to the process name as '[probe]',
eg. '/usr/bin/smokeping [FPing]'. If you don't like this
behaviour, set this variable to 'no'. If 'concurrentprobes' is not set to 'yes', this variable has no effect. - Default value: changeprocessnames = yes
- tmail
- Path to your tSmoke HTML mail template file. See the tSmoke
documentation for details. - changecgiprogramname
- Usually the Smokeping CGI tries to log any possible errors with an
extended program name that includes the IP address of the remote
client for easier debugging. If this variable is set to 'no', the
program name will not be modified. The only reason you would want
this is if you have a very old version of the CGI::Carp module. See the installation document for details. - Default value: changecgiprogramname = yes
- linkstyle
- How the CGI self-referring links are created. The possible values
are - absolute
Full hostname and path derived from the 'cgiurl' variable<a href="http://hostname/path/smokeping.cgi?foo=bar">
- relative
Only the parameter part is specified<a href="?foo=bar">
- original
The way the links were generated before Smokeping version
2.0.4: no hostname, only the path<a href="/path/smokeping.cgi?foo=bar"> - The default is "relative", which hopefully works for everybody.
- Default value: linkstyle = relative
- precreateperms
- If this variable is set, the Smokeping daemon will create its
directory hierarchy under 'dyndir' (the CGI-writable tree) at
startup with the specified directory permission bits. The value is interpreted as an octal value, eg. 775 for rwxrwxr-x etc. - If unset, the directories will be created dynamically with umask
022. - Example: precreateperms = 2755
- *** Database *** (mandatory section)
- Describes the properties of the round robin database for storing the
SmokePing data. Note that it is not possible to edit existing RRDs by
changing the entries in the cfg file. - The following variables can be set in this section:
- step (mandatory setting)
- Duration of the base operation interval of SmokePing in seconds.
SmokePing will venture out every step seconds to ping your target hosts. If 'concurrent_probes' is set to 'yes' (see above), this
variable can be overridden by each probe. Note that the step in the RRD files is fixed when they are originally generated, and if you
change the step parameter afterwards, you'll have to delete the old RRD files or somehow convert them. - pings (mandatory setting)
- How many pings should be sent to each target. Suggested: 20 pings.
Minimum value: 3 pings. This can be overridden by each probe. Some
probes (those derived from basefork.pm, ie. most except the FPing
variants) will even let this be overridden target-specifically.
Note that the number of pings in the RRD files is fixed when they
are originally generated, and if you change this parameter
afterwards, you'll have to delete the old RRD files or somehow
convert them. - This section also contains a table describing the setup of the
SmokePing database. Below are reasonable defaults. Only change them if you know rrdtool and its workings. Each row in the table describes one RRA.
# cons xff steps rows
AVERAGE 0.5 1 1008
AVERAGE 0.5 12 4320MIN 0.5 12 4320
MAX 0.5 12 4320- AVERAGE 0.5 144 720
MAX 0.5 144 720
MIN 0.5 144 720 - column 0
Consolidation method.
- column 1
What part of the consolidated intervals must be known to warrant a known entry.
- column 2
How many steps to consolidate into for each RRA entry.
- column 3
How many rows this RRA should have.
- *** Presentation *** (mandatory section)
- Defines how the SmokePing data should be presented.
- The following variables can be set in this section:
- template (mandatory setting)
The webpage template must contain keywords of the form
<##keyword##>. There is a sample template included with SmokePing;
use it as the basis for your experiments. Default template contains a pointer to the SmokePing counter and homepage. I would be glad if you would not remove this as it gives me an indication as to how
widely used the tool is. - charset
By default, SmokePing assumes the 'iso-8859-15' character set. If
you use something else, this is the place to speak up. - The following sections are valid on level 1:
- +overview (mandatory section)
The Overview section defines how the Overview graphs should look.The following variables can be set in this section:width (mandatory setting)Width of the Overview Graphs.height (mandatory setting)Height of the Overview Graphs.rangeHow much time should be depicted in the Overview graph. Time
must be specified as a number followed by a letter which
specifies the unit of time. Known units are: seconds, minutes, hours, ddays, weeks, years.max_rttAny roundtrip time larger than this value will cropped in the
overview graphmedian_colorBy default the median line is drawn in red. Override it here
with a hex color in the format rrggbb. Note that if you work with slaves, the slaves medians will be drawn in the slave
color in the overview graph.strftimeUse posix strftime to format the timestamp in the left hand
lower corner of the overview graph - +detail (mandatory section)
- The following variables can be set in this section:
- width (mandatory setting)
How many pixels wide should detail graphs be
- height (mandatory setting)
How many pixels high should detail graphs be
- loss_background
Should the graphs be shown with a background showing loss data for emphasis (yes/no)?If this option is enabled, uptime data is no longer displayed
in the graph background. - logarithmic
should the graphs be shown in a logarithmic scale (yes/no)
- unison_tolerance
if a graph is more than this factor of the median 'max' it
drops out of the unison scaling algorithm. A factor of two
would mean that any graph with a max either less than half or
more than twice the median 'max' will be dropped from unison
scaling - max_rtt
Any roundtrip time larger than this value will cropped in the
detail graph - strftime
Use posix strftime to format the timestamp in the left hand
lower corner of the detail graph - nodata_color
Paint the graph background in a special color when there is no data for this period because smokeping has not been running
(#rrggbb) - The detailed display can contain several graphs of different
resolution. In this table you can specify the resolution of each
graph. - Example:
"Last 3 Hours" 3h
"Last 30 Hours" 30h
"Last 10 Days" 10d
"Last 400 Days" 400d - column 0
Description of the particular resolution.
- column 1
How much time should be depicted. The format is the same as for the age parameter of the Overview section.
- The following sections are valid on level 2:
- ++loss_colors
In the Detail view, the color of the median line depends the
amount of lost packets. SmokePing comes with a reasonable
default setting, but you may choose to disagree. The table
below lets you specify your own coloring.Example:
Loss Color Legend
1 00ff00 "<1"
3 0000ff "<3"
1000 ff0000 ">=3"column 0Activate when the number of losst pings is larger or equal to this numbercolumn 1Color for this range.column 2Description for this range. - ++uptime_colors
- When monitoring a host with DYNAMIC addressing, SmokePing will
keep track of how long the machine is able to keep the same IP
address. This time is plotted as a color in the graphs
background. SmokePing comes with a reasonable default setting, but you may choose to disagree. The table below lets you
specify your own coloring - Example:
# Uptime Color Legend
3600 00ff00 "<1h"
86400 0000ff "<1d"
604800 ff0000 "<1w"
1000000000000 ffff00 ">1w" - Uptime is in days!
- column 0
Activate when uptime in days is larger of equal to this
number - column 1
Color for this uptime range.
- column 2
Description for this range.
- +charts
- The SmokePing Charts feature allow you to have Top X lists created according to various criteria.
- Each type of Chart must live in its own subsection.
+ charts
menu = Charts
title = The most interesting destinations
++ median
sorter = Median(entries=>10)
title = Sorted by Median Roundtrip Time
menu = Top Median RTT
format = Median RTT %e s - The following variables can be set in this section:
- menu (mandatory setting)
Menu entry for the Charts Section.
- title (mandatory setting)
Page title for the Charts Section.
- The following sections are valid on level 2:
- ++/[-_0-9a-zA-Z.]+/
The following variables can be set in this section:menu (mandatory setting)Menu entrytitle (mandatory setting)Page titlesorter (mandatory setting)sorter for this charts sectionsformatsprintf format string to format curent value
- +multihost
- Settings for the multihost graphs. At the moment this is only used for the color setting. Check the documentation on the host property of the target section for more.
- The following variables can be set in this section:
- colors
Space separated list of colors for multihost graphsExample: colors = ff0000 00ff00 0000ff
- +hierarchies
- Provide an alternative presentation hierarchy for your smokeping
data. After setting up a hierarchy in this section. You can use it in each tagets parent property. A drop-down menu in the smokeping
website lets the user switch presentation hierarchy. - The following sections are valid on level 2:
- ++/[-_0-9a-zA-Z.]+/
Identifier of the hierarchie. Use this as prefix in the targets parent propertyThe following variables can be set in this section:title (mandatory setting)Title for this hierarchy
- *** Probes *** (mandatory section)
- The Probes Section configures Probe modules. Probe modules integrate an
external ping command into SmokePing. Check the documentation of each
module for more information about it. - The following sections are valid on level 1:
- +/[-_0-9a-zA-Z.]+/
- Each module can take specific configuration information from this
area. The jumble of letters above is a regular expression defining legal module names. - See the documentation of each module for details about its
variables. - The grammar of this section is dynamically modified based on its name.
- The following sections are valid on level 2:
- ++/[-_0-9a-zA-Z.]+/
You can define multiple instances of the same probe with
subsections. These instances can have different values for
their variables, so you can eg. have one instance of the FPing probe with packet size 1000 and step 300 and another instance
with packet size 64 and step 30. The name of the subsection
determines what the probe will be called, so you can write
descriptive names for the probes.If there are any subsections defined, the main section for this probe will just provide default parameter values for the probe instances, ie. it will not become a probe instance itself.The example above would be written like this:
*** Probes ***+ FPing
# this value is common for the two subprobes
binary = /usr/bin/fping++ FPingLarge
packetsize = 1000
step = 300++ FPingSmall
packetsize = 64
step = 30Dynamical grammar changes for example instances of this section:AnotherDNS: (See the separate module documentation for details about each variable.)The following new variables are valid:forkssee aboveDefault value: forks = 5offsetsee abovestepsee abovelookup(This variable can be overridden target-specifically in the Targets section.)mininterval(This variable can be overridden target-specifically in the Targets section.)Default value: mininterval = 0.5pings(This variable can be overridden target-specifically in the Targets section.)port(This variable can be overridden target-specifically in the Targets section.)Default value: port = 53recordtype(This variable can be overridden target-specifically in the Targets section.)Default value: recordtype = Arequire_answers(This variable can be overridden target-specifically in the Targets section.)require_noerror(This variable can be overridden target-specifically in the Targets section.)timeout(This variable can be overridden target-specifically in the Targets section.)Default value: timeout = 5Syntax changes for subsection /[-_0-9a-zA-Z.]+/
The following new variables are valid:forkssee aboveThis variable inherits its value from the parent section if nothing is specified here.Default value: forks = 5offsetsee aboveThis variable inherits its value from the parent section if nothing is specified here.stepsee aboveThis variable inherits its value from the parent section if nothing is specified here.lookupThis variable inherits its value from the parent section if nothing is specified here.minintervalThis variable inherits its value from the parent section if nothing is specified here.Default value: mininterval = 0.5pingsThis variable inherits its value from the parent section if nothing is specified here.portThis variable inherits its value from the parent section if nothing is specified here.Default value: port = 53recordtypeThis variable inherits its value from the parent section if nothing is specified here.Default value: recordtype = Arequire_answersThis variable inherits its value from the parent section if nothing is specified here.require_noerrorThis variable inherits its value from the parent section if nothing is specified here.timeoutThis variable inherits its value from the parent section if nothing is specified here.Default value: timeout = 5 - (End of dynamical grammar changes for example instance
"AnotherDNS".) - AnotherSSH: (See the separate module documentation for details about each variable.)
- The following new variables are valid:
- forks
see aboveDefault value: forks = 5
- offset
see above
- step
see above
- greeting
(This variable can be overridden target-specifically in the Targets section.)Default value: greeting = SSH-Latency-Measurement-Sorryfor-this-logmessage
- interval
(This variable can be overridden target-specifically in the Targets section.)Default value: interval = established
- mininterval
(This variable can be overridden target-specifically in the Targets section.)Default value: mininterval = 0.5
- pings
(This variable can be overridden target-specifically in the Targets section.)
- port
(This variable can be overridden target-specifically in the Targets section.)Default value: port = 22
- timeout
(This variable can be overridden target-specifically in the Targets section.)Default value: timeout = 5
- Syntax changes for subsection /[-_0-9a-zA-Z.]+/
The following new variables are valid:forkssee aboveThis variable inherits its value from the parent section if nothing is specified here.Default value: forks = 5offsetsee aboveThis variable inherits its value from the parent section if nothing is specified here.stepsee aboveThis variable inherits its value from the parent section if nothing is specified here.greetingThis variable inherits its value from the parent section if nothing is specified here.Default value: greeting = SSH-Latency-MeasurementSorry-for-this-logmessageintervalThis variable inherits its value from the parent section if nothing is specified here.Default value: interval = establishedminintervalThis variable inherits its value from the parent section if nothing is specified here.Default value: mininterval = 0.5pingsThis variable inherits its value from the parent section if nothing is specified here.portThis variable inherits its value from the parent section if nothing is specified here.Default value: port = 22timeoutThis variable inherits its value from the parent section if nothing is specified here.Default value: timeout = 5 - (End of dynamical grammar changes for example instance
"AnotherSSH".) - CiscoRTTMonDNS: (See the separate module documentation for details about each variable.)
- The following new variables are valid:
- forks
see aboveDefault value: forks = 5
- offset
see above
- step
see above
- timeout
see aboveDefault value: timeout = 5
- ioshost
(This variable can be overridden target-specifically in the Targets section.)This variable dynamically modifies the grammar based on its value.
- iosint
(This variable can be overridden target-specifically in the Targets section.)
- name
(This variable can be overridden target-specifically in the Targets section.)This variable dynamically modifies the grammar based on its value.
- pings
(This variable can be overridden target-specifically in the Targets section.)
- Syntax changes for subsection /[-_0-9a-zA-Z.]+/
The following new variables are valid:forkssee aboveThis variable inherits its value from the parent section if nothing is specified here.Default value: forks = 5offsetsee aboveThis variable inherits its value from the parent section if nothing is specified here.stepsee aboveThis variable inherits its value from the parent section if nothing is specified here.timeoutsee aboveThis variable inherits its value from the parent section if nothing is specified here.Default value: timeout = 5ioshostThis variable inherits its value from the parent section if nothing is specified here.iosintThis variable inherits its value from the parent section if nothing is specified here.nameThis variable inherits its value from the parent section if nothing is specified here.pingsThis variable inherits its value from the parent section if nothing is specified here. - (End of dynamical grammar changes for example instance
"CiscoRTTMonDNS".) - CiscoRTTMonEchoICMP: (See the separate module documentation for details about each variable.)
- The following new variables are valid:
- forks
see aboveDefault value: forks = 5
- offset
see above
- step
see above
- timeout
see aboveDefault value: timeout = 5
- ioshost
(This variable can be overridden target-specifically in the Targets section.)This variable dynamically modifies the grammar based on its value.
- iosint
(This variable can be overridden target-specifically in the Targets section.)
- packetsize
(This variable can be overridden target-specifically in the Targets section.)Default value: packetsize = 56
- pings
(This variable can be overridden target-specifically in the Targets section.)
- tos (This variable can be overridden target-specifically in the
Targets section.)
- vrf (This variable can be overridden target-specifically in the
Targets section.)
- Syntax changes for subsection /[-_0-9a-zA-Z.]+/
The following new variables are valid:forkssee aboveThis variable inherits its value from the parent section if nothing is specified here.Default value: forks = 5offsetsee aboveThis variable inherits its value from the parent section if nothing is specified here.stepsee aboveThis variable inherits its value from the parent section if nothing is specified here.timeoutsee aboveThis variable inherits its value from the parent section if nothing is specified here.Default value: timeout = 5ioshostThis variable inherits its value from the parent section if nothing is specified here.iosintThis variable inherits its value from the parent section if nothing is specified here.packetsizeThis variable inherits its value from the parent section if nothing is specified here.Default value: packetsize = 56pingsThis variable inherits its value from the parent section if nothing is specified here.tos This variable inherits its value from the parentsection if nothing is specified here.vrf This variable inherits its value from the parentsection if nothing is specified here. - (End of dynamical grammar changes for example instance
"CiscoRTTMonEchoICMP".) - CiscoRTTMonTcpConnect: (See the separate module documentation for details about each variable.)
- The following new variables are valid:
- forks
see aboveDefault value: forks = 5
- offset
see above
- step
see above
- timeout
see aboveDefault value: timeout = 5
- ioshost
(This variable can be overridden target-specifically in the Targets section.)This variable dynamically modifies the grammar based on its value.
- iosint
(This variable can be overridden target-specifically in the Targets section.)
- pings
(This variable can be overridden target-specifically in the Targets section.)
- port
(This variable can be overridden target-specifically in the Targets section.)Default value: port = 80
- tos (This variable can be overridden target-specifically in the
Targets section.)
- Syntax changes for subsection /[-_0-9a-zA-Z.]+/
The following new variables are valid:forkssee aboveThis variable inherits its value from the parent section if nothing is specified here.Default value: forks = 5offsetsee aboveThis variable inherits its value from the parent section if nothing is specified here.stepsee aboveThis variable inherits its value from the parent section if nothing is specified here.timeoutsee aboveThis variable inherits its value from the parent section if nothing is specified here.Default value: timeout = 5ioshostThis variable inherits its value from the parent section if nothing is specified here.iosintThis variable inherits its value from the parent section if nothing is specified here.pingsThis variable inherits its value from the parent section if nothing is specified here.portThis variable inherits its value from the parent section if nothing is specified here.Default value: port = 80tos This variable inherits its value from the parentsection if nothing is specified here. - (End of dynamical grammar changes for example instance
"CiscoRTTMonTcpConnect".) - Curl: (See the separate module documentation for details about each variable.)
- The following new variables are valid:
- binary
see aboveDefault value: binary = /usr/bin/curl
- forks
see aboveDefault value: forks = 5
- offset
see above
- step
see above
- agent
(This variable can be overridden target-specifically in the Targets section.)
- extraargs
(This variable can be overridden target-specifically in the Targets section.)
- extrare
(This variable can be overridden target-specifically in the Targets section.)Default value: extrare = / /
- follow_redirects
(This variable can be overridden target-specifically in the Targets section.)Default value: follow_redirects = no
- include_redirects
(This variable can be overridden target-specifically in the Targets section.)Default value: include_redirects = no
- insecure_ssl
(This variable can be overridden target-specifically in the Targets section.)
- interface
(This variable can be overridden target-specifically in the Targets section.)
- pings
(This variable can be overridden target-specifically in the Targets section.)
- ssl2
(This variable can be overridden target-specifically in the Targets section.)
- timeout
(This variable can be overridden target-specifically in the Targets section.)Default value: timeout = 10
- urlformat
(This variable can be overridden target-specifically in the Targets section.)This variable dynamically modifies the grammar based on its value.
- Syntax changes for subsection /[-_0-9a-zA-Z.]+/
The following new variables are valid:binarysee aboveThis variable inherits its value from the parent section if nothing is specified here.Default value: binary = /usr/bin/curlforkssee aboveThis variable inherits its value from the parent section if nothing is specified here.Default value: forks = 5offsetsee aboveThis variable inherits its value from the parent section if nothing is specified here.stepsee aboveThis variable inherits its value from the parent section if nothing is specified here.agentThis variable inherits its value from the parent section if nothing is specified here.extraargsThis variable inherits its value from the parent section if nothing is specified here.extrareThis variable inherits its value from the parent section if nothing is specified here.Default value: extrare = / /follow_redirectsThis variable inherits its value from the parent section if nothing is specified here.Default value: follow_redirects = noinclude_redirectsThis variable inherits its value from the parent section if nothing is specified here.Default value: include_redirects = noinsecure_sslThis variable inherits its value from the parent section if nothing is specified here.interfaceThis variable inherits its value from the parent section if nothing is specified here.pingsThis variable inherits its value from the parent section if nothing is specified here.ssl2This variable inherits its value from the parent section if nothing is specified here.timeoutThis variable inherits its value from the parent section if nothing is specified here.Default value: timeout = 10urlformatThis variable inherits its value from the parent section if nothing is specified here. - (End of dynamical grammar changes for example instance "Curl".)
- DNS: (See the separate module documentation for details about each variable.)
- The following new variables are valid:
- binary (mandatory setting)
see above
- forks
see aboveDefault value: forks = 5
- offset
see above
- step
see above
- timeout
see aboveDefault value: timeout = 5
- lookup
(This variable can be overridden target-specifically in the Targets section.)
- pings
(This variable can be overridden target-specifically in the Targets section.)
- server
(This variable can be overridden target-specifically in the Targets section.)
- Syntax changes for subsection /[-_0-9a-zA-Z.]+/
The following new variables are valid:binary (mandatory setting)see aboveThis variable inherits its value from the parent section if nothing is specified here.forkssee aboveThis variable inherits its value from the parent section if nothing is specified here.Default value: forks = 5offsetsee aboveThis variable inherits its value from the parent section if nothing is specified here.stepsee aboveThis variable inherits its value from the parent section if nothing is specified here.timeoutsee aboveThis variable inherits its value from the parent section if nothing is specified here.Default value: timeout = 5lookupThis variable inherits its value from the parent section if nothing is specified here.pingsThis variable inherits its value from the parent section if nothing is specified here.serverThis variable inherits its value from the parent section if nothing is specified here. - (End of dynamical grammar changes for example instance "DNS".)
- EchoPing: (See the separate module documentation for details about each variable.)
- The following new variables are valid:
- binary
see aboveDefault value: binary = /usr/bin/echoping
- forks
see aboveDefault value: forks = 5
- offset
see above
- step
see above
- extraopts
(This variable can be overridden target-specifically in the Targets section.)
- fill
(This variable can be overridden target-specifically in the Targets section.)
- ipversion
(This variable can be overridden target-specifically in the Targets section.)
- pings
(This variable can be overridden target-specifically in the Targets section.)
- priority
(This variable can be overridden target-specifically in the Targets section.)
- size
(This variable can be overridden target-specifically in the Targets section.)
- timeout
(This variable can be overridden target-specifically in the Targets section.)Default value: timeout = 5
- tos (This variable can be overridden target-specifically in the
Targets section.)
- udp (This variable can be overridden target-specifically in the
Targets section.)
- waittime
(This variable can be overridden target-specifically in the Targets section.)
- Syntax changes for subsection /[-_0-9a-zA-Z.]+/
The following new variables are valid:binarysee aboveThis variable inherits its value from the parent section if nothing is specified here.Default value: binary = /usr/bin/echopingforkssee aboveThis variable inherits its value from the parent section if nothing is specified here.Default value: forks = 5offsetsee aboveThis variable inherits its value from the parent section if nothing is specified here.stepsee aboveThis variable inherits its value from the parent section if nothing is specified here.extraoptsThis variable inherits its value from the parent section if nothing is specified here.fillThis variable inherits its value from the parent section if nothing is specified here.ipversionThis variable inherits its value from the parent section if nothing is specified here.pingsThis variable inherits its value from the parent section if nothing is specified here.priorityThis variable inherits its value from the parent section if nothing is specified here.sizeThis variable inherits its value from the parent section if nothing is specified here.timeoutThis variable inherits its value from the parent section if nothing is specified here.Default value: timeout = 5tos This variable inherits its value from the parentsection if nothing is specified here.udp This variable inherits its value from the parentsection if nothing is specified here.waittimeThis variable inherits its value from the parent section if nothing is specified here. - (End of dynamical grammar changes for example instance
"EchoPing".) - EchoPingChargen: (See the separate module documentation for details about each variable.)
- The following new variables are valid:
- binary
see aboveDefault value: binary = /usr/bin/echoping
- forks
see aboveDefault value: forks = 5
- offset
see above
- step
see above
- extraopts
(This variable can be overridden target-specifically in the Targets section.)
- fill
(This variable can be overridden target-specifically in the Targets section.)
- ipversion
(This variable can be overridden target-specifically in the Targets section.)
- pings
(This variable can be overridden target-specifically in the Targets section.)
- priority
(This variable can be overridden target-specifically in the Targets section.)
- size
(This variable can be overridden target-specifically in the Targets section.)
- timeout
(This variable can be overridden target-specifically in the Targets section.)Default value: timeout = 5
- tos (This variable can be overridden target-specifically in the
Targets section.)
- waittime
(This variable can be overridden target-specifically in the Targets section.)
- Syntax changes for subsection /[-_0-9a-zA-Z.]+/
The following new variables are valid:binarysee aboveThis variable inherits its value from the parent section if nothing is specified here.Default value: binary = /usr/bin/echopingforkssee aboveThis variable inherits its value from the parent section if nothing is specified here.Default value: forks = 5offsetsee aboveThis variable inherits its value from the parent section if nothing is specified here.stepsee aboveThis variable inherits its value from the parent section if nothing is specified here.extraoptsThis variable inherits its value from the parent section if nothing is specified here.fillThis variable inherits its value from the parent section if nothing is specified here.ipversionThis variable inherits its value from the parent section if nothing is specified here.pingsThis variable inherits its value from the parent section if nothing is specified here.priorityThis variable inherits its value from the parent section if nothing is specified here.sizeThis variable inherits its value from the parent section if nothing is specified here.timeoutThis variable inherits its value from the parent section if nothing is specified here.Default value: timeout = 5tos This variable inherits its value from the parentsection if nothing is specified here.waittimeThis variable inherits its value from the parent section if nothing is specified here. - (End of dynamical grammar changes for example instance
"EchoPingChargen".) - EchoPingDNS: (See the separate module documentation for details about each variable.)
- The following new variables are valid:
- binary
see aboveDefault value: binary = /usr/bin/echoping
- forks
see aboveDefault value: forks = 5
- offset
see above
- step
see above
- dns_request
(This variable can be overridden target-specifically in the Targets section.)This variable dynamically modifies the grammar based on its value.
- dns_tcp
(This variable can be overridden target-specifically in the Targets section.)
- dns_type
(This variable can be overridden target-specifically in the Targets section.)Default value: dns_type = A
- extraopts
(This variable can be overridden target-specifically in the Targets section.)
- ipversion
(This variable can be overridden target-specifically in the Targets section.)
- pings
(This variable can be overridden target-specifically in the Targets section.)
- plugin
(This variable can be overridden target-specifically in the Targets section.)Default value: plugin = dns
- pluginargs
(This variable can be overridden target-specifically in the Targets section.)
- priority
(This variable can be overridden target-specifically in the Targets section.)
- timeout
(This variable can be overridden target-specifically in the Targets section.)Default value: timeout = 5
- tos (This variable can be overridden target-specifically in the
Targets section.)
- waittime
(This variable can be overridden target-specifically in the Targets section.)
- Syntax changes for subsection /[-_0-9a-zA-Z.]+/
The following new variables are valid:binarysee aboveThis variable inherits its value from the parent section if nothing is specified here.Default value: binary = /usr/bin/echopingforkssee aboveThis variable inherits its value from the parent section if nothing is specified here.Default value: forks = 5offsetsee aboveThis variable inherits its value from the parent section if nothing is specified here.stepsee aboveThis variable inherits its value from the parent section if nothing is specified here.dns_requestThis variable inherits its value from the parent section if nothing is specified here.dns_tcpThis variable inherits its value from the parent section if nothing is specified here.dns_typeThis variable inherits its value from the parent section if nothing is specified here.Default value: dns_type = AextraoptsThis variable inherits its value from the parent section if nothing is specified here.ipversionThis variable inherits its value from the parent section if nothing is specified here.pingsThis variable inherits its value from the parent section if nothing is specified here.pluginThis variable inherits its value from the parent section if nothing is specified here.Default value: plugin = dnspluginargsThis variable inherits its value from the parent section if nothing is specified here.priorityThis variable inherits its value from the parent section if nothing is specified here.timeoutThis variable inherits its value from the parent section if nothing is specified here.Default value: timeout = 5tos This variable inherits its value from the parentsection if nothing is specified here.waittimeThis variable inherits its value from the parent section if nothing is specified here. - (End of dynamical grammar changes for example instance
"EchoPingDNS".) - EchoPingDiscard: (See the separate module documentation for details about each variable.)
- The following new variables are valid:
- binary
see aboveDefault value: binary = /usr/bin/echoping
- forks
see aboveDefault value: forks = 5
- offset
see above
- step
see above
- extraopts
(This variable can be overridden target-specifically in the Targets section.)
- fill
(This variable can be overridden target-specifically in the Targets section.)
- ipversion
(This variable can be overridden target-specifically in the Targets section.)
- pings
(This variable can be overridden target-specifically in the Targets section.)
- priority
(This variable can be overridden target-specifically in the Targets section.)
- size
(This variable can be overridden target-specifically in the Targets section.)
- timeout
(This variable can be overridden target-specifically in the Targets section.)Default value: timeout = 5
- tos (This variable can be overridden target-specifically in the
Targets section.)
- udp (This variable can be overridden target-specifically in the
Targets section.)
- waittime
(This variable can be overridden target-specifically in the Targets section.)
- Syntax changes for subsection /[-_0-9a-zA-Z.]+/
The following new variables are valid:binarysee aboveThis variable inherits its value from the parent section if nothing is specified here.Default value: binary = /usr/bin/echopingforkssee aboveThis variable inherits its value from the parent section if nothing is specified here.Default value: forks = 5offsetsee aboveThis variable inherits its value from the parent section if nothing is specified here.stepsee aboveThis variable inherits its value from the parent section if nothing is specified here.extraoptsThis variable inherits its value from the parent section if nothing is specified here.fillThis variable inherits its value from the parent section if nothing is specified here.ipversionThis variable inherits its value from the parent section if nothing is specified here.pingsThis variable inherits its value from the parent section if nothing is specified here.priorityThis variable inherits its value from the parent section if nothing is specified here.sizeThis variable inherits its value from the parent section if nothing is specified here.timeoutThis variable inherits its value from the parent section if nothing is specified here.Default value: timeout = 5tos This variable inherits its value from the parentsection if nothing is specified here.udp This variable inherits its value from the parentsection if nothing is specified here.waittimeThis variable inherits its value from the parent section if nothing is specified here. - (End of dynamical grammar changes for example instance
"EchoPingDiscard".) - EchoPingHttp: (See the separate module documentation for details about each variable.)
- The following new variables are valid:
- binary
see aboveDefault value: binary = /usr/bin/echoping
- forks
see aboveDefault value: forks = 5
- offset
see above
- step
see above
- accept_redirects
(This variable can be overridden target-specifically in the Targets section.)
- extraopts
(This variable can be overridden target-specifically in the Targets section.)
- ignore_cache
(This variable can be overridden target-specifically in the Targets section.)
- ipversion
(This variable can be overridden target-specifically in the Targets section.)
- pings
(This variable can be overridden target-specifically in the Targets section.)
- port
(This variable can be overridden target-specifically in the Targets section.)
- priority
(This variable can be overridden target-specifically in the Targets section.)
- revalidate_data
(This variable can be overridden target-specifically in the Targets section.)
- timeout
(This variable can be overridden target-specifically in the Targets section.)Default value: timeout = 5
- tos (This variable can be overridden target-specifically in the
Targets section.)
- url (This variable can be overridden target-specifically in the
Targets section.)Default value: url = /
- waittime
(This variable can be overridden target-specifically in the Targets section.)
- Syntax changes for subsection /[-_0-9a-zA-Z.]+/
The following new variables are valid:binarysee aboveThis variable inherits its value from the parent section if nothing is specified here.Default value: binary = /usr/bin/echopingforkssee aboveThis variable inherits its value from the parent section if nothing is specified here.Default value: forks = 5offsetsee aboveThis variable inherits its value from the parent section if nothing is specified here.stepsee aboveThis variable inherits its value from the parent section if nothing is specified here.accept_redirectsThis variable inherits its value from the parent section if nothing is specified here.extraoptsThis variable inherits its value from the parent section if nothing is specified here.ignore_cacheThis variable inherits its value from the parent section if nothing is specified here.ipversionThis variable inherits its value from the parent section if nothing is specified here.pingsThis variable inherits its value from the parent section if nothing is specified here.portThis variable inherits its value from the parent section if nothing is specified here.priorityThis variable inherits its value from the parent section if nothing is specified here.revalidate_dataThis variable inherits its value from the parent section if nothing is specified here.timeoutThis variable inherits its value from the parent section if nothing is specified here.Default value: timeout = 5tos This variable inherits its value from the parentsection if nothing is specified here.url This variable inherits its value from the parentsection if nothing is specified here.Default value: url = /waittimeThis variable inherits its value from the parent section if nothing is specified here. - (End of dynamical grammar changes for example instance
"EchoPingHttp".) - EchoPingHttps: (See the separate module documentation for details about each variable.)
- The following new variables are valid:
- binary
see aboveDefault value: binary = /usr/bin/echoping
- forks
see aboveDefault value: forks = 5
- offset
see above
- step
see above
- accept_redirects
(This variable can be overridden target-specifically in the Targets section.)
- extraopts
(This variable can be overridden target-specifically in the Targets section.)
- ignore_cache
(This variable can be overridden target-specifically in the Targets section.)
- ipversion
(This variable can be overridden target-specifically in the Targets section.)
- pings
(This variable can be overridden target-specifically in the Targets section.)
- port
(This variable can be overridden target-specifically in the Targets section.)
- priority
(This variable can be overridden target-specifically in the Targets section.)
- revalidate_data
(This variable can be overridden target-specifically in the Targets section.)
- timeout
(This variable can be overridden target-specifically in the Targets section.)Default value: timeout = 5
- tos (This variable can be overridden target-specifically in the
Targets section.)
- url (This variable can be overridden target-specifically in the
Targets section.)Default value: url = /
- waittime
(This variable can be overridden target-specifically in the Targets section.)
- Syntax changes for subsection /[-_0-9a-zA-Z.]+/
The following new variables are valid:binarysee aboveThis variable inherits its value from the parent section if nothing is specified here.Default value: binary = /usr/bin/echopingforkssee aboveThis variable inherits its value from the parent section if nothing is specified here.Default value: forks = 5offsetsee aboveThis variable inherits its value from the parent section if nothing is specified here.stepsee aboveThis variable inherits its value from the parent section if nothing is specified here.accept_redirectsThis variable inherits its value from the parent section if nothing is specified here.extraoptsThis variable inherits its value from the parent section if nothing is specified here.ignore_cacheThis variable inherits its value from the parent section if nothing is specified here.ipversionThis variable inherits its value from the parent section if nothing is specified here.pingsThis variable inherits its value from the parent section if nothing is specified here.portThis variable inherits its value from the parent section if nothing is specified here.priorityThis variable inherits its value from the parent section if nothing is specified here.revalidate_dataThis variable inherits its value from the parent section if nothing is specified here.timeoutThis variable inherits its value from the parent section if nothing is specified here.Default value: timeout = 5tos This variable inherits its value from the parentsection if nothing is specified here.url This variable inherits its value from the parentsection if nothing is specified here.Default value: url = /waittimeThis variable inherits its value from the parent section if nothing is specified here. - (End of dynamical grammar changes for example instance
"EchoPingHttps".) - EchoPingIcp: (See the separate module documentation for details about each variable.)
- The following new variables are valid:
- binary
see aboveDefault value: binary = /usr/bin/echoping
- forks
see aboveDefault value: forks = 5
- offset
see above
- step
see above
- extraopts
(This variable can be overridden target-specifically in the Targets section.)
- ipversion
(This variable can be overridden target-specifically in the Targets section.)
- pings
(This variable can be overridden target-specifically in the Targets section.)
- priority
(This variable can be overridden target-specifically in the Targets section.)
- timeout
(This variable can be overridden target-specifically in the Targets section.)Default value: timeout = 5
- tos (This variable can be overridden target-specifically in the
Targets section.)
- url (This variable can be overridden target-specifically in the
Targets section.)This variable dynamically modifies the grammar based on its value.
- waittime
(This variable can be overridden target-specifically in the Targets section.)
- Syntax changes for subsection /[-_0-9a-zA-Z.]+/
The following new variables are valid:binarysee aboveThis variable inherits its value from the parent section if nothing is specified here.Default value: binary = /usr/bin/echopingforkssee aboveThis variable inherits its value from the parent section if nothing is specified here.Default value: forks = 5offsetsee aboveThis variable inherits its value from the parent section if nothing is specified here.stepsee aboveThis variable inherits its value from the parent section if nothing is specified here.extraoptsThis variable inherits its value from the parent section if nothing is specified here.ipversionThis variable inherits its value from the parent section if nothing is specified here.pingsThis variable inherits its value from the parent section if nothing is specified here.priorityThis variable inherits its value from the parent section if nothing is specified here.timeoutThis variable inherits its value from the parent section if nothing is specified here.Default value: timeout = 5tos This variable inherits its value from the parentsection if nothing is specified here.url This variable inherits its value from the parentsection if nothing is specified here.waittimeThis variable inherits its value from the parent section if nothing is specified here. - (End of dynamical grammar changes for example instance
"EchoPingIcp".) - EchoPingLDAP: (See the separate module documentation for details about each variable.)
- The following new variables are valid:
- binary
see aboveDefault value: binary = /usr/bin/echoping
- forks
see aboveDefault value: forks = 5
- offset
see above
- step
see above
- extraopts
(This variable can be overridden target-specifically in the Targets section.)
- ipversion
(This variable can be overridden target-specifically in the Targets section.)
- ldap_base
(This variable can be overridden target-specifically in the Targets section.)
- ldap_request
(This variable can be overridden target-specifically in the Targets section.)
- ldap_scope
(This variable can be overridden target-specifically in the Targets section.)
- pings
(This variable can be overridden target-specifically in the Targets section.)
- plugin
(This variable can be overridden target-specifically in the Targets section.)Default value: plugin = ldap
- pluginargs
(This variable can be overridden target-specifically in the Targets section.)
- priority
(This variable can be overridden target-specifically in the Targets section.)
- timeout
(This variable can be overridden target-specifically in the Targets section.)Default value: timeout = 5
- tos (This variable can be overridden target-specifically in the
Targets section.)
- waittime
(This variable can be overridden target-specifically in the Targets section.)
- Syntax changes for subsection /[-_0-9a-zA-Z.]+/
The following new variables are valid:binarysee aboveThis variable inherits its value from the parent section if nothing is specified here.Default value: binary = /usr/bin/echopingforkssee aboveThis variable inherits its value from the parent section if nothing is specified here.Default value: forks = 5offsetsee aboveThis variable inherits its value from the parent section if nothing is specified here.stepsee aboveThis variable inherits its value from the parent section if nothing is specified here.extraoptsThis variable inherits its value from the parent section if nothing is specified here.ipversionThis variable inherits its value from the parent section if nothing is specified here.ldap_baseThis variable inherits its value from the parent section if nothing is specified here.ldap_requestThis variable inherits its value from the parent section if nothing is specified here.ldap_scopeThis variable inherits its value from the parent section if nothing is specified here.pingsThis variable inherits its value from the parent section if nothing is specified here.pluginThis variable inherits its value from the parent section if nothing is specified here.Default value: plugin = ldappluginargsThis variable inherits its value from the parent section if nothing is specified here.priorityThis variable inherits its value from the parent section if nothing is specified here.timeoutThis variable inherits its value from the parent section if nothing is specified here.Default value: timeout = 5tos This variable inherits its value from the parentsection if nothing is specified here.waittimeThis variable inherits its value from the parent section if nothing is specified here. - (End of dynamical grammar changes for example instance
"EchoPingLDAP".) - EchoPingPlugin: (See the separate module documentation for details about each variable.)
- The following new variables are valid:
- binary
see aboveDefault value: binary = /usr/bin/echoping
- forks
see aboveDefault value: forks = 5
- offset
see above
- step
see above
- extraopts
(This variable can be overridden target-specifically in the Targets section.)
- ipversion
(This variable can be overridden target-specifically in the Targets section.)
- pings
(This variable can be overridden target-specifically in the Targets section.)
- plugin
(This variable can be overridden target-specifically in the Targets section.)This variable dynamically modifies the grammar based on its value.
- pluginargs
(This variable can be overridden target-specifically in the Targets section.)
- priority
(This variable can be overridden target-specifically in the Targets section.)
- timeout
(This variable can be overridden target-specifically in the Targets section.)Default value: timeout = 5
- tos (This variable can be overridden target-specifically in the
Targets section.)
- waittime
(This variable can be overridden target-specifically in the Targets section.)
- Syntax changes for subsection /[-_0-9a-zA-Z.]+/
The following new variables are valid:binarysee aboveThis variable inherits its value from the parent section if nothing is specified here.Default value: binary = /usr/bin/echopingforkssee aboveThis variable inherits its value from the parent section if nothing is specified here.Default value: forks = 5offsetsee aboveThis variable inherits its value from the parent section if nothing is specified here.stepsee aboveThis variable inherits its value from the parent section if nothing is specified here.extraoptsThis variable inherits its value from the parent section if nothing is specified here.ipversionThis variable inherits its value from the parent section if nothing is specified here.pingsThis variable inherits its value from the parent section if nothing is specified here.pluginThis variable inherits its value from the parent section if nothing is specified here.pluginargsThis variable inherits its value from the parent section if nothing is specified here.priorityThis variable inherits its value from the parent section if nothing is specified here.timeoutThis variable inherits its value from the parent section if nothing is specified here.Default value: timeout = 5tos This variable inherits its value from the parentsection if nothing is specified here.waittimeThis variable inherits its value from the parent section if nothing is specified here. - (End of dynamical grammar changes for example instance
"EchoPingPlugin".) - EchoPingSmtp: (See the separate module documentation for details about each variable.)
- The following new variables are valid:
- binary
see aboveDefault value: binary = /usr/bin/echoping
- forks
see aboveDefault value: forks = 5
- offset
see above
- step
see above
- extraopts
(This variable can be overridden target-specifically in the Targets section.)
- ipversion
(This variable can be overridden target-specifically in the Targets section.)
- pings
(This variable can be overridden target-specifically in the Targets section.)
- priority
(This variable can be overridden target-specifically in the Targets section.)
- timeout
(This variable can be overridden target-specifically in the Targets section.)Default value: timeout = 5
- tos (This variable can be overridden target-specifically in the
Targets section.)
- waittime
(This variable can be overridden target-specifically in the Targets section.)
- Syntax changes for subsection /[-_0-9a-zA-Z.]+/
The following new variables are valid:binarysee aboveThis variable inherits its value from the parent section if nothing is specified here.Default value: binary = /usr/bin/echopingforkssee aboveThis variable inherits its value from the parent section if nothing is specified here.Default value: forks = 5offsetsee aboveThis variable inherits its value from the parent section if nothing is specified here.stepsee aboveThis variable inherits its value from the parent section if nothing is specified here.extraoptsThis variable inherits its value from the parent section if nothing is specified here.ipversionThis variable inherits its value from the parent section if nothing is specified here.pingsThis variable inherits its value from the parent section if nothing is specified here.priorityThis variable inherits its value from the parent section if nothing is specified here.timeoutThis variable inherits its value from the parent section if nothing is specified here.Default value: timeout = 5tos This variable inherits its value from the parentsection if nothing is specified here.waittimeThis variable inherits its value from the parent section if nothing is specified here. - (End of dynamical grammar changes for example instance
"EchoPingSmtp".) - EchoPingWhois: (See the separate module documentation for details about each variable.)
- The following new variables are valid:
- binary
see aboveDefault value: binary = /usr/bin/echoping
- forks
see aboveDefault value: forks = 5
- offset
see above
- step
see above
- extraopts
(This variable can be overridden target-specifically in the Targets section.)
- ipversion
(This variable can be overridden target-specifically in the Targets section.)
- pings
(This variable can be overridden target-specifically in the Targets section.)
- plugin
(This variable can be overridden target-specifically in the Targets section.)Default value: plugin = whois
- pluginargs
(This variable can be overridden target-specifically in the Targets section.)
- priority
(This variable can be overridden target-specifically in the Targets section.)
- timeout
(This variable can be overridden target-specifically in the Targets section.)Default value: timeout = 5
- tos (This variable can be overridden target-specifically in the
Targets section.)
- waittime
(This variable can be overridden target-specifically in the Targets section.)
- whois_request
(This variable can be overridden target-specifically in the Targets section.)This variable dynamically modifies the grammar based on its value.
- Syntax changes for subsection /[-_0-9a-zA-Z.]+/
The following new variables are valid:binarysee aboveThis variable inherits its value from the parent section if nothing is specified here.Default value: binary = /usr/bin/echopingforkssee aboveThis variable inherits its value from the parent section if nothing is specified here.Default value: forks = 5offsetsee aboveThis variable inherits its value from the parent section if nothing is specified here.stepsee aboveThis variable inherits its value from the parent section if nothing is specified here.extraoptsThis variable inherits its value from the parent section if nothing is specified here.ipversionThis variable inherits its value from the parent section if nothing is specified here.pingsThis variable inherits its value from the parent section if nothing is specified here.pluginThis variable inherits its value from the parent section if nothing is specified here.Default value: plugin = whoispluginargsThis variable inherits its value from the parent section if nothing is specified here.priorityThis variable inherits its value from the parent section if nothing is specified here.timeoutThis variable inherits its value from the parent section if nothing is specified here.Default value: timeout = 5tos This variable inherits its value from the parentsection if nothing is specified here.waittimeThis variable inherits its value from the parent section if nothing is specified here.whois_requestThis variable inherits its value from the parent section if nothing is specified here. - (End of dynamical grammar changes for example instance
"EchoPingWhois".) - FPing: (See the separate module documentation for details about each variable.)
- The following new variables are valid:
- binary (mandatory setting)
see above
- hostinterval
see above
- mininterval
see aboveDefault value: mininterval = 0.01
- offset
see above
- packetsize
see above
- pings
see above
- sourceaddress
see above
- step
see above
- timeout
see above
- Syntax changes for subsection /[-_0-9a-zA-Z.]+/
The following new variables are valid:binary (mandatory setting)see aboveThis variable inherits its value from the parent section if nothing is specified here.hostintervalsee aboveThis variable inherits its value from the parent section if nothing is specified here.minintervalsee aboveThis variable inherits its value from the parent section if nothing is specified here.Default value: mininterval = 0.01offsetsee aboveThis variable inherits its value from the parent section if nothing is specified here.packetsizesee aboveThis variable inherits its value from the parent section if nothing is specified here.pingssee aboveThis variable inherits its value from the parent section if nothing is specified here.sourceaddresssee aboveThis variable inherits its value from the parent section if nothing is specified here.stepsee aboveThis variable inherits its value from the parent section if nothing is specified here.timeoutsee aboveThis variable inherits its value from the parent section if nothing is specified here. - (End of dynamical grammar changes for example instance
"FPing".) - FPing6: (See the separate module documentation for details about each variable.)
- The following new variables are valid:
- binary (mandatory setting)
see above
- hostinterval
see above
- mininterval
see aboveDefault value: mininterval = 0.01
- offset
see above
- packetsize
see above
- pings
see above
- sourceaddress
see above
- step
see above
- timeout
see above
- Syntax changes for subsection /[-_0-9a-zA-Z.]+/
The following new variables are valid:binary (mandatory setting)see aboveThis variable inherits its value from the parent section if nothing is specified here.hostintervalsee aboveThis variable inherits its value from the parent section if nothing is specified here.minintervalsee aboveThis variable inherits its value from the parent section if nothing is specified here.Default value: mininterval = 0.01offsetsee aboveThis variable inherits its value from the parent section if nothing is specified here.packetsizesee aboveThis variable inherits its value from the parent section if nothing is specified here.pingssee aboveThis variable inherits its value from the parent section if nothing is specified here.sourceaddresssee aboveThis variable inherits its value from the parent section if nothing is specified here.stepsee aboveThis variable inherits its value from the parent section if nothing is specified here.timeoutsee aboveThis variable inherits its value from the parent section if nothing is specified here. - (End of dynamical grammar changes for example instance
"FPing6".) - FTPtransfer: (See the separate module documentation for details about each variable.)
- The following new variables are valid:
- destfile
see above
- forks
see aboveDefault value: forks = 5
- min_interval
see aboveDefault value: min_interval = 1
- mode (mandatory setting)
see above
- offset
see above
- passwordfile
see above
- srcfile (mandatory setting)
see above
- step
see above
- localaddr
(This variable can be overridden target-specifically in the Targets section.)
- passive
(This variable can be overridden target-specifically in the Targets section.)
- password
(This variable can be overridden target-specifically in the Targets section.)
- pings
(This variable can be overridden target-specifically in the Targets section.)
- port
(This variable can be overridden target-specifically in the Targets section.)
- timeout (mandatory setting)
(This variable can be overridden target-specifically in the Targets section.)
- username
(This variable can be overridden target-specifically in the Targets section.)
- Syntax changes for subsection /[-_0-9a-zA-Z.]+/
The following new variables are valid:destfilesee aboveThis variable inherits its value from the parent section if nothing is specified here.forkssee aboveThis variable inherits its value from the parent section if nothing is specified here.Default value: forks = 5min_intervalsee aboveThis variable inherits its value from the parent section if nothing is specified here.Default value: min_interval = 1mode (mandatory setting)see aboveThis variable inherits its value from the parent section if nothing is specified here.offsetsee aboveThis variable inherits its value from the parent section if nothing is specified here.passwordfilesee aboveThis variable inherits its value from the parent section if nothing is specified here.srcfile (mandatory setting)see aboveThis variable inherits its value from the parent section if nothing is specified here.stepsee aboveThis variable inherits its value from the parent section if nothing is specified here.localaddrThis variable inherits its value from the parent section if nothing is specified here.passiveThis variable inherits its value from the parent section if nothing is specified here.passwordThis variable inherits its value from the parent section if nothing is specified here.pingsThis variable inherits its value from the parent section if nothing is specified here.portThis variable inherits its value from the parent section if nothing is specified here.timeout (mandatory setting)This variable inherits its value from the parent section if nothing is specified here.usernameThis variable inherits its value from the parent section if nothing is specified here. - (End of dynamical grammar changes for example instance
"FTPtransfer".) - IOSPing: (See the separate module documentation for details about each variable.)
- The following new variables are valid:
- binary (mandatory setting)
see above
- forks
see aboveDefault value: forks = 5
- offset
see above
- packetsize
see aboveDefault value: packetsize = 56
- step
see above
- timeout
see aboveDefault value: timeout = 5
- ioshost
(This variable can be overridden target-specifically in the Targets section.)This variable dynamically modifies the grammar based on its value.
- iosint
(This variable can be overridden target-specifically in the Targets section.)
- iosuser
(This variable can be overridden target-specifically in the Targets section.)
- pings
(This variable can be overridden target-specifically in the Targets section.)
- Syntax changes for subsection /[-_0-9a-zA-Z.]+/
The following new variables are valid:binary (mandatory setting)see aboveThis variable inherits its value from the parent section if nothing is specified here.forkssee aboveThis variable inherits its value from the parent section if nothing is specified here.Default value: forks = 5offsetsee aboveThis variable inherits its value from the parent section if nothing is specified here.packetsizesee aboveThis variable inherits its value from the parent section if nothing is specified here.Default value: packetsize = 56stepsee aboveThis variable inherits its value from the parent section if nothing is specified here.timeoutsee aboveThis variable inherits its value from the parent section if nothing is specified here.Default value: timeout = 5ioshostThis variable inherits its value from the parent section if nothing is specified here.iosintThis variable inherits its value from the parent section if nothing is specified here.iosuserThis variable inherits its value from the parent section if nothing is specified here.pingsThis variable inherits its value from the parent section if nothing is specified here. - (End of dynamical grammar changes for example instance
"IOSPing".) - LDAP: (See the separate module documentation for details about each variable.)
- The following new variables are valid:
- forks
see aboveDefault value: forks = 5
- offset
see above
- passwordfile
see above
- step
see above
- attrs
(This variable can be overridden target-specifically in the Targets section.)
- base
(This variable can be overridden target-specifically in the Targets section.)
- binddn
(This variable can be overridden target-specifically in the Targets section.)
- filter
(This variable can be overridden target-specifically in the Targets section.)This variable dynamically modifies the grammar based on its value.
- mininterval
(This variable can be overridden target-specifically in the Targets section.)Default value: mininterval = 1
- password
(This variable can be overridden target-specifically in the Targets section.)
- pings
(This variable can be overridden target-specifically in the Targets section.)
- port
(This variable can be overridden target-specifically in the Targets section.)
- scope
(This variable can be overridden target-specifically in the Targets section.)Default value: scope = sub
- start_tls
(This variable can be overridden target-specifically in the Targets section.)
- timeout
(This variable can be overridden target-specifically in the Targets section.)Default value: timeout = 5
- version
(This variable can be overridden target-specifically in the Targets section.)
- Syntax changes for subsection /[-_0-9a-zA-Z.]+/
The following new variables are valid:forkssee aboveThis variable inherits its value from the parent section if nothing is specified here.Default value: forks = 5offsetsee aboveThis variable inherits its value from the parent section if nothing is specified here.passwordfilesee aboveThis variable inherits its value from the parent section if nothing is specified here.stepsee aboveThis variable inherits its value from the parent section if nothing is specified here.attrsThis variable inherits its value from the parent section if nothing is specified here.baseThis variable inherits its value from the parent section if nothing is specified here.binddnThis variable inherits its value from the parent section if nothing is specified here.filterThis variable inherits its value from the parent section if nothing is specified here.minintervalThis variable inherits its value from the parent section if nothing is specified here.Default value: mininterval = 1passwordThis variable inherits its value from the parent section if nothing is specified here.pingsThis variable inherits its value from the parent section if nothing is specified here.portThis variable inherits its value from the parent section if nothing is specified here.scopeThis variable inherits its value from the parent section if nothing is specified here.Default value: scope = substart_tlsThis variable inherits its value from the parent section if nothing is specified here.timeoutThis variable inherits its value from the parent section if nothing is specified here.Default value: timeout = 5versionThis variable inherits its value from the parent section if nothing is specified here. - (End of dynamical grammar changes for example instance "LDAP".)
- Radius: (See the separate module documentation for details about each variable.)
- The following new variables are valid:
- forks
see aboveDefault value: forks = 5
- offset
see above
- passwordfile
see above
- secretfile
see above
- step
see above
- mininterval
(This variable can be overridden target-specifically in the Targets section.)Default value: mininterval = 1
- nas_ip_address
(This variable can be overridden target-specifically in the Targets section.)
- password
(This variable can be overridden target-specifically in the Targets section.)
- pings
(This variable can be overridden target-specifically in the Targets section.)
- port
(This variable can be overridden target-specifically in the Targets section.)
- secret
(This variable can be overridden target-specifically in the Targets section.)
- timeout
(This variable can be overridden target-specifically in the Targets section.)Default value: timeout = 5
- username
(This variable can be overridden target-specifically in the Targets section.)This variable dynamically modifies the grammar based on its value.
- Syntax changes for subsection /[-_0-9a-zA-Z.]+/
The following new variables are valid:forkssee aboveThis variable inherits its value from the parent section if nothing is specified here.Default value: forks = 5offsetsee aboveThis variable inherits its value from the parent section if nothing is specified here.passwordfilesee aboveThis variable inherits its value from the parent section if nothing is specified here.secretfilesee aboveThis variable inherits its value from the parent section if nothing is specified here.stepsee aboveThis variable inherits its value from the parent section if nothing is specified here.minintervalThis variable inherits its value from the parent section if nothing is specified here.Default value: mininterval = 1nas_ip_addressThis variable inherits its value from the parent section if nothing is specified here.passwordThis variable inherits its value from the parent section if nothing is specified here.pingsThis variable inherits its value from the parent section if nothing is specified here.portThis variable inherits its value from the parent section if nothing is specified here.secretThis variable inherits its value from the parent section if nothing is specified here.timeoutThis variable inherits its value from the parent section if nothing is specified here.Default value: timeout = 5usernameThis variable inherits its value from the parent section if nothing is specified here. - (End of dynamical grammar changes for example instance
"Radius".) - RemoteFPing: (See the separate module documentation for details about each variable.)
- The following new variables are valid:
- binary (mandatory setting)
see above
- hostinterval
see above
- mininterval
see aboveDefault value: mininterval = 0.01
- offset
see above
- packetsize
see above
- pings
see above
- rbinary (mandatory setting)
see above
- rhost (mandatory setting)
see above
- ruser
see above
- sourceaddress
see above
- step
see above
- timeout
see above
- Syntax changes for subsection /[-_0-9a-zA-Z.]+/
The following new variables are valid:binary (mandatory setting)see aboveThis variable inherits its value from the parent section if nothing is specified here.hostintervalsee aboveThis variable inherits its value from the parent section if nothing is specified here.minintervalsee aboveThis variable inherits its value from the parent section if nothing is specified here.Default value: mininterval = 0.01offsetsee aboveThis variable inherits its value from the parent section if nothing is specified here.packetsizesee aboveThis variable inherits its value from the parent section if nothing is specified here.pingssee aboveThis variable inherits its value from the parent section if nothing is specified here.rbinary (mandatory setting)see aboveThis variable inherits its value from the parent section if nothing is specified here.rhost (mandatory setting)see aboveThis variable inherits its value from the parent section if nothing is specified here.rusersee aboveThis variable inherits its value from the parent section if nothing is specified here.sourceaddresssee aboveThis variable inherits its value from the parent section if nothing is specified here.stepsee aboveThis variable inherits its value from the parent section if nothing is specified here.timeoutsee aboveThis variable inherits its value from the parent section if nothing is specified here. - (End of dynamical grammar changes for example instance
"RemoteFPing".) - SSH: (See the separate module documentation for details about each variable.)
- The following new variables are valid:
- binary (mandatory setting)
see above
- forks
see aboveDefault value: forks = 5
- offset
see above
- step
see above
- timeout
see aboveDefault value: timeout = 5
- keytype
(This variable can be overridden target-specifically in the Targets section.)Default value: keytype = rsa
- pings
(This variable can be overridden target-specifically in the Targets section.)
- port
(This variable can be overridden target-specifically in the Targets section.)Default value: port = 22
- Syntax changes for subsection /[-_0-9a-zA-Z.]+/
The following new variables are valid:binary (mandatory setting)see aboveThis variable inherits its value from the parent section if nothing is specified here.forkssee aboveThis variable inherits its value from the parent section if nothing is specified here.Default value: forks = 5offsetsee aboveThis variable inherits its value from the parent section if nothing is specified here.stepsee aboveThis variable inherits its value from the parent section if nothing is specified here.timeoutsee aboveThis variable inherits its value from the parent section if nothing is specified here.Default value: timeout = 5keytypeThis variable inherits its value from the parent section if nothing is specified here.Default value: keytype = rsapingsThis variable inherits its value from the parent section if nothing is specified here.portThis variable inherits its value from the parent section if nothing is specified here.Default value: port = 22 - (End of dynamical grammar changes for example instance "SSH".)
- TCPPing: (See the separate module documentation for details about each variable.)
- The following new variables are valid:
- binary (mandatory setting)
see above
- forks
see aboveDefault value: forks = 5
- offset
see above
- step
see above
- timeout
see aboveDefault value: timeout = 5
- pings
(This variable can be overridden target-specifically in the Targets section.)
- port
(This variable can be overridden target-specifically in the Targets section.)
- Syntax changes for subsection /[-_0-9a-zA-Z.]+/
The following new variables are valid:binary (mandatory setting)see aboveThis variable inherits its value from the parent section if nothing is specified here.forkssee aboveThis variable inherits its value from the parent section if nothing is specified here.Default value: forks = 5offsetsee aboveThis variable inherits its value from the parent section if nothing is specified here.stepsee aboveThis variable inherits its value from the parent section if nothing is specified here.timeoutsee aboveThis variable inherits its value from the parent section if nothing is specified here.Default value: timeout = 5pingsThis variable inherits its value from the parent section if nothing is specified here.portThis variable inherits its value from the parent section if nothing is specified here. - (End of dynamical grammar changes for example instance
"TCPPing".) - TacacsPlus: (See the separate module documentation for details about each variable.)
- The following new variables are valid:
- forks
see aboveDefault value: forks = 5
- offset
see above
- passwordfile
see above
- secretfile
see above
- step
see above
- authtype
(This variable can be overridden target-specifically in the Targets section.)Default value: authtype = ASCII
- mininterval
(This variable can be overridden target-specifically in the Targets section.)Default value: mininterval = 1
- password
(This variable can be overridden target-specifically in the Targets section.)
- pings
(This variable can be overridden target-specifically in the Targets section.)
- port
(This variable can be overridden target-specifically in the Targets section.)Default value: port = 49
- secret
(This variable can be overridden target-specifically in the Targets section.)
- timeout
(This variable can be overridden target-specifically in the Targets section.)Default value: timeout = 5
- username
(This variable can be overridden target-specifically in the Targets section.)This variable dynamically modifies the grammar based on its value.
- Syntax changes for subsection /[-_0-9a-zA-Z.]+/
The following new variables are valid:forkssee aboveThis variable inherits its value from the parent section if nothing is specified here.Default value: forks = 5offsetsee aboveThis variable inherits its value from the parent section if nothing is specified here.passwordfilesee aboveThis variable inherits its value from the parent section if nothing is specified here.secretfilesee aboveThis variable inherits its value from the parent section if nothing is specified here.stepsee aboveThis variable inherits its value from the parent section if nothing is specified here.authtypeThis variable inherits its value from the parent section if nothing is specified here.Default value: authtype = ASCIIminintervalThis variable inherits its value from the parent section if nothing is specified here.Default value: mininterval = 1passwordThis variable inherits its value from the parent section if nothing is specified here.pingsThis variable inherits its value from the parent section if nothing is specified here.portThis variable inherits its value from the parent section if nothing is specified here.Default value: port = 49secretThis variable inherits its value from the parent section if nothing is specified here.timeoutThis variable inherits its value from the parent section if nothing is specified here.Default value: timeout = 5usernameThis variable inherits its value from the parent section if nothing is specified here. - (End of dynamical grammar changes for example instance
"TacacsPlus".) - TelnetIOSPing: (See the separate module documentation for details about each variable.)
- The following new variables are valid:
- forks
see aboveDefault value: forks = 5
- offset
see above
- packetsize
see aboveDefault value: packetsize = 56
- step
see above
- timeout
see aboveDefault value: timeout = 5
- iospass
(This variable can be overridden target-specifically in the Targets section.)This variable dynamically modifies the grammar based on its value.
- iosuser
(This variable can be overridden target-specifically in the Targets section.)This variable dynamically modifies the grammar based on its value.
- pings
(This variable can be overridden target-specifically in the Targets section.)
- psource
(This variable can be overridden target-specifically in the Targets section.)
- source
(This variable can be overridden target-specifically in the Targets section.)This variable dynamically modifies the grammar based on its value.
- Syntax changes for subsection /[-_0-9a-zA-Z.]+/
The following new variables are valid:forkssee aboveThis variable inherits its value from the parent section if nothing is specified here.Default value: forks = 5offsetsee aboveThis variable inherits its value from the parent section if nothing is specified here.packetsizesee aboveThis variable inherits its value from the parent section if nothing is specified here.Default value: packetsize = 56stepsee aboveThis variable inherits its value from the parent section if nothing is specified here.timeoutsee aboveThis variable inherits its value from the parent section if nothing is specified here.Default value: timeout = 5iospassThis variable inherits its value from the parent section if nothing is specified here.iosuserThis variable inherits its value from the parent section if nothing is specified here.pingsThis variable inherits its value from the parent section if nothing is specified here.psourceThis variable inherits its value from the parent section if nothing is specified here.sourceThis variable inherits its value from the parent section if nothing is specified here. - (End of dynamical grammar changes for example instance
"TelnetIOSPing".) - TelnetJunOSPing: (See the separate module documentation for details about each variable.)
- The following new variables are valid:
- forks
see aboveDefault value: forks = 5
- offset
see above
- packetsize
see aboveDefault value: packetsize = 100
- step
see above
- timeout
see aboveDefault value: timeout = 5
- junospass
(This variable can be overridden target-specifically in the Targets section.)This variable dynamically modifies the grammar based on its value.
- junosuser
(This variable can be overridden target-specifically in the Targets section.)This variable dynamically modifies the grammar based on its value.
- pings
(This variable can be overridden target-specifically in the Targets section.)
- psource
(This variable can be overridden target-specifically in the Targets section.)
- source
(This variable can be overridden target-specifically in the Targets section.)This variable dynamically modifies the grammar based on its value.
- Syntax changes for subsection /[-_0-9a-zA-Z.]+/
The following new variables are valid:forkssee aboveThis variable inherits its value from the parent section if nothing is specified here.Default value: forks = 5offsetsee aboveThis variable inherits its value from the parent section if nothing is specified here.packetsizesee aboveThis variable inherits its value from the parent section if nothing is specified here.Default value: packetsize = 100stepsee aboveThis variable inherits its value from the parent section if nothing is specified here.timeoutsee aboveThis variable inherits its value from the parent section if nothing is specified here.Default value: timeout = 5junospassThis variable inherits its value from the parent section if nothing is specified here.junosuserThis variable inherits its value from the parent section if nothing is specified here.pingsThis variable inherits its value from the parent section if nothing is specified here.psourceThis variable inherits its value from the parent section if nothing is specified here.sourceThis variable inherits its value from the parent section if nothing is specified here. - (End of dynamical grammar changes for example instance
"TelnetJunOSPing".) - WebProxyFilter: (See the separate module documentation for details about each variable.)
- The following new variables are valid:
- forks
see aboveDefault value: forks = 5
- maxsize
see aboveDefault value: maxsize = 2000
- min_interval
see aboveDefault value: min_interval = 1
- offset
see above
- step
see above
- useragent
see aboveDefault value: useragent = SmokePing/2.x (WebProxyFilter
Probe) - deny_re (mandatory setting)
(This variable can be overridden target-specifically in the Targets section.)
- more_hosts
(This variable can be overridden target-specifically in the Targets section.)
- pings
(This variable can be overridden target-specifically in the Targets section.)
- timeout
(This variable can be overridden target-specifically in the Targets section.)Default value: timeout = 2
- Syntax changes for subsection /[-_0-9a-zA-Z.]+/
The following new variables are valid:forkssee aboveThis variable inherits its value from the parent section if nothing is specified here.Default value: forks = 5maxsizesee aboveThis variable inherits its value from the parent section if nothing is specified here.Default value: maxsize = 2000min_intervalsee aboveThis variable inherits its value from the parent section if nothing is specified here.Default value: min_interval = 1offsetsee aboveThis variable inherits its value from the parent section if nothing is specified here.stepsee aboveThis variable inherits its value from the parent section if nothing is specified here.useragentsee aboveThis variable inherits its value from the parent section if nothing is specified here.Default value: useragent = SmokePing/2.x
(WebProxyFilter Probe)deny_re (mandatory setting)This variable inherits its value from the parent section if nothing is specified here.more_hostsThis variable inherits its value from the parent section if nothing is specified here.pingsThis variable inherits its value from the parent section if nothing is specified here.timeoutThis variable inherits its value from the parent section if nothing is specified here.Default value: timeout = 2 - (End of dynamical grammar changes for example instance
"WebProxyFilter".) - (End of dynamical grammar changes for example instances of section "/[-_0-9a-zA-Z.]+/".)
- *** Targets *** (mandatory section)
- The Target Section defines the actual work of SmokePing. It contains a
hierarchical list of hosts which mark the endpoints of the network
connections the system should monitor. Each section can contain one
host as well as other sections. By adding slaves you can measure the
connectivity of an endpoint looking from several sources. - The following variables can be set in this section:
- probe (mandatory setting)
- The name of the probe module to be used for this host. The value of this variable gets propagated
- This variable dynamically modifies the grammar based on its value.
- menu (mandatory setting)
- Menu entry for this section. If not set this will be set to the
hostname. - title (mandatory setting)
- Title of the page when it is displayed. This will be set to the
hostname if left empty. - remark
- An optional remark on the current section. It gets displayed on the webpage.
- alerts
- A comma separated list of alerts to check for this target. The
alerts have to be setup in the Alerts section. Alerts are inherited by child nodes. Use an empty alerts definition to remove inherited alerts from the current target and its children. - slaves
parents - The following sections are valid on level 1:
- +/[-_0-9a-zA-Z.]+/
- Each target section can contain information about a host to monitor
as well as further target sections. Most variables have already
been described above. The expression above defines legal names for target sections. - This section is recursive: it can contain subsection(s) with the same syntax.
- The following variables can be set in this section:
- probe
This variable inherits its value from the parent section if nothing is specified here.This variable dynamically modifies the grammar based on its value.
- menu
title
alertsComma separated list of alert namesThis variable inherits its value from the parent section if nothing is specified here. - note
Some information about this entry which does NOT get displayed on the web.
- email
This is the contact address for the owner of the current host. In connection with the DYNAMIC hosts, the address will be used for sending the belowmentioned script.
- host
There are three types of "hosts" in smokeping.1. The 'hostname' is a name of a host you want to target from smokeping2. The string DYNAMIC. Is for machines that have a dynamic IP address. These boxes are required to regularly contact the SmokePing server to confirm their IP address.
When starting SmokePing with the commandline argument - --email it will add a secret password to each of the
DYNAMIC host lines and send a script to the owner of each
host. This script must be started periodically (cron) on
the host in question to let smokeping know where the host
is curently located. If the target machine supports SNMP
SmokePing will also query the hosts sysContact, sysName and sysLocation properties to make sure it is still the same
host. - 3. A space separated list of 'target-path' entries (multihost
target). All targets mentioned in this list will be
displayed in one graph. Note that the graph will look
different from the normal smokeping graphs. The syntax for multihost targets is as follows:
host = /world/town/host1 /world/town2/host33 /world/town2/host1~slave - remark
rawlog
Log the raw data, gathered for this target, in tab separated
format, to a file with the same basename as the corresponding
RRD file. Use posix strftime to format the timestamp to be put into the file name. The filename is built like this:
basename.strftime.csv- Example:
rawlog=%Y-%m-%dthis would create a new logfile every day with a name like
this:
targethost.2004-05-03.csvalertee
If you want to have alerts for this target and all targets
below it go to a particular address on top of the address
already specified in the alert, you can add it here. This can
be a comma separated list of items.This variable inherits its value from the parent section if nothing is specified here. - slaves
The slave names must match the slaves you have setup in the
slaves section. - This variable inherits its value from the parent section if nothing is specified here.
- parents
After setting up a hierarchy in the Presentation section of the configuration file you can use this property to assign an entry to alternate hierarchies. The format for parent entries is.
hierarchyA:/Node1/Node2 hierarchyB:/Node3- The entries from all parent properties together will build a
new tree for each hierarchy. With this method it is possible to make a single target show up multiple times in a tree. If you
think this is a good thing, go ahead, nothing is stopping you. Since you do not only define the parent but the full path of
the parent node, circular dependencies are not possible. - hide
Set the hide property to 'yes' to hide this host from the
navigation menu and from search results. Note that if you set
the hide property on a non leaf entry all subordinate entries
will also disapear in the menu structure. If you know a direct link to a page it is still accessible. Pages which are hidden
from the menu due to a parent being hidden will still show up
in search results and in alternate hierarchies where they are
below a non hidden parent. - Default value: hide = no
- nomasterpoll
Use this in a master/slave setup where the master must not poll a particular target. The master will now skip this entry in its polling cycle. Note that if you set the hide property on a non leaf entry all subordinate entries will also disapear in the
menu structure. You can still access them via direct link or
via an alternate hierarchy. - If you have no master/slave setup this will have a similar
effect to the hide property, except that the menu entry will
still show up, but will not contain any graphs. - This variable inherits its value from the parent section if nothing is specified here.
- Default value: nomasterpoll = no
- The following sections are valid on level 2:
- ++/[-_0-9a-zA-Z.]+/
This section is recursive: it can contain subsection(s) with the same syntax. - Dynamical grammar changes for example values of variable "probe":
- AnotherDNS: (See the separate module documentation for details about
each variable.)
The following new variables are valid: - lookup
see above - mininterval
see above - pings
see above - port
see above - recordtype
see above - require_answers
see above - require_noerror
see above - timeout
see above - Syntax changes for subsection /[-_0-9a-zA-Z.]+/
The following new variables are valid:- lookup
see above - This variable inherits its value from the parent section if nothing is specified here.
- mininterval
see above - This variable inherits its value from the parent section if nothing is specified here.
- pings
see above - This variable inherits its value from the parent section if nothing is specified here.
- port
see above - This variable inherits its value from the parent section if nothing is specified here.
- recordtype
see above - This variable inherits its value from the parent section if nothing is specified here.
- require_answers
see above - This variable inherits its value from the parent section if nothing is specified here.
- require_noerror
see above - This variable inherits its value from the parent section if nothing is specified here.
- timeout
see above - This variable inherits its value from the parent section if nothing is specified here.
- (End of dynamical grammar changes for variable "probe" example
value "AnotherDNS".) - AnotherSSH: (See the separate module documentation for details about
each variable.)
The following new variables are valid: - greeting
see above - interval
see above - mininterval
see above - pings
see above - port
see above - timeout
see above - Syntax changes for subsection /[-_0-9a-zA-Z.]+/
The following new variables are valid:- greeting
see above - This variable inherits its value from the parent section if nothing is specified here.
- interval
see above - This variable inherits its value from the parent section if nothing is specified here.
- mininterval
see above - This variable inherits its value from the parent section if nothing is specified here.
- pings
see above - This variable inherits its value from the parent section if nothing is specified here.
- port
see above - This variable inherits its value from the parent section if nothing is specified here.
- timeout
see above - This variable inherits its value from the parent section if nothing is specified here.
- (End of dynamical grammar changes for variable "probe" example
value "AnotherSSH".) - CiscoRTTMonDNS: (See the separate module documentation for details
about each variable.)
The following new variables are valid: - ioshost
see above - iosint
see above - name
see above - pings
see above - Syntax changes for subsection /[-_0-9a-zA-Z.]+/
The following new variables are valid:- ioshost
see above - This variable inherits its value from the parent section if nothing is specified here.
- iosint
see above - This variable inherits its value from the parent section if nothing is specified here.
- name
see above - This variable inherits its value from the parent section if nothing is specified here.
- pings
see above - This variable inherits its value from the parent section if nothing is specified here.
- (End of dynamical grammar changes for variable "probe" example
value "CiscoRTTMonDNS".) - CiscoRTTMonEchoICMP: (See the separate module documentation for details
about each variable.)
The following new variables are valid: - ioshost
see above - iosint
see above - packetsize
see above - pings
see above - tos see above
- vrf see above
- Syntax changes for subsection /[-_0-9a-zA-Z.]+/
The following new variables are valid:- ioshost
see above - This variable inherits its value from the parent section if nothing is specified here.
- iosint
see above - This variable inherits its value from the parent section if nothing is specified here.
- packetsize
see above - This variable inherits its value from the parent section if nothing is specified here.
- pings
see above - This variable inherits its value from the parent section if nothing is specified here.
- tos see above
This variable inherits its value from the parent section if nothing is specified here.vrf see above
This variable inherits its value from the parent section if nothing is specified here. - (End of dynamical grammar changes for variable "probe" example
value "CiscoRTTMonEchoICMP".) - CiscoRTTMonTcpConnect: (See the separate module documentation for
details about each variable.)
The following new variables are valid: - ioshost
see above - iosint
see above - pings
see above - port
see above - tos see above
- Syntax changes for subsection /[-_0-9a-zA-Z.]+/
The following new variables are valid:- ioshost
see above - This variable inherits its value from the parent section if nothing is specified here.
- iosint
see above - This variable inherits its value from the parent section if nothing is specified here.
- pings
see above - This variable inherits its value from the parent section if nothing is specified here.
- port
see above - This variable inherits its value from the parent section if nothing is specified here.
- tos see above
This variable inherits its value from the parent section if nothing is specified here. - (End of dynamical grammar changes for variable "probe" example
value "CiscoRTTMonTcpConnect".) - Curl: (See the separate module documentation for details about each
variable.)
The following new variables are valid: - agent
see above - extraargs
see above - extrare
see above - follow_redirects
see above - include_redirects
see above - insecure_ssl
see above - interface
see above - pings
see above - ssl2
see above - timeout
see above - urlformat
see above - Syntax changes for subsection /[-_0-9a-zA-Z.]+/
The following new variables are valid:- agent
see above - This variable inherits its value from the parent section if nothing is specified here.
- extraargs
see above - This variable inherits its value from the parent section if nothing is specified here.
- extrare
see above - This variable inherits its value from the parent section if nothing is specified here.
- follow_redirects
see above - This variable inherits its value from the parent section if nothing is specified here.
- include_redirects
see above - This variable inherits its value from the parent section if nothing is specified here.
- insecure_ssl
see above - This variable inherits its value from the parent section if nothing is specified here.
- interface
see above - This variable inherits its value from the parent section if nothing is specified here.
- pings
see above - This variable inherits its value from the parent section if nothing is specified here.
- ssl2
see above - This variable inherits its value from the parent section if nothing is specified here.
- timeout
see above - This variable inherits its value from the parent section if nothing is specified here.
- urlformat
see above - This variable inherits its value from the parent section if nothing is specified here.
- (End of dynamical grammar changes for variable "probe" example
value "Curl".) - DNS: (See the separate module documentation for details about each
variable.)
The following new variables are valid: - lookup
see above - pings
see above - server
see above - Syntax changes for subsection /[-_0-9a-zA-Z.]+/
The following new variables are valid:- lookup
see above - This variable inherits its value from the parent section if nothing is specified here.
- pings
see above - This variable inherits its value from the parent section if nothing is specified here.
- server
see above - This variable inherits its value from the parent section if nothing is specified here.
- (End of dynamical grammar changes for variable "probe" example
value "DNS".) - EchoPing: (See the separate module documentation for details about each
variable.)
The following new variables are valid: - extraopts
see above - fill
see above - ipversion
see above - pings
see above - priority
see above - size
see above - timeout
see above - tos see above
- udp see above
- waittime
see above - Syntax changes for subsection /[-_0-9a-zA-Z.]+/
The following new variables are valid:- extraopts
see above - This variable inherits its value from the parent section if nothing is specified here.
- fill
see above - This variable inherits its value from the parent section if nothing is specified here.
- ipversion
see above - This variable inherits its value from the parent section if nothing is specified here.
- pings
see above - This variable inherits its value from the parent section if nothing is specified here.
- priority
see above - This variable inherits its value from the parent section if nothing is specified here.
- size
see above - This variable inherits its value from the parent section if nothing is specified here.
- timeout
see above - This variable inherits its value from the parent section if nothing is specified here.
- tos see above
This variable inherits its value from the parent section if nothing is specified here.udp see above
This variable inherits its value from the parent section if nothing is specified here.waittime
see aboveThis variable inherits its value from the parent section if nothing is specified here. - (End of dynamical grammar changes for variable "probe" example
value "EchoPing".) - EchoPingChargen: (See the separate module documentation for details
about each variable.)
The following new variables are valid: - extraopts
see above - fill
see above - ipversion
see above - pings
see above - priority
see above - size
see above - timeout
see above - tos see above
- waittime
see above - Syntax changes for subsection /[-_0-9a-zA-Z.]+/
The following new variables are valid:- extraopts
see above - This variable inherits its value from the parent section if nothing is specified here.
- fill
see above - This variable inherits its value from the parent section if nothing is specified here.
- ipversion
see above - This variable inherits its value from the parent section if nothing is specified here.
- pings
see above - This variable inherits its value from the parent section if nothing is specified here.
- priority
see above - This variable inherits its value from the parent section if nothing is specified here.
- size
see above - This variable inherits its value from the parent section if nothing is specified here.
- timeout
see above - This variable inherits its value from the parent section if nothing is specified here.
- tos see above
This variable inherits its value from the parent section if nothing is specified here.waittime
see aboveThis variable inherits its value from the parent section if nothing is specified here. - (End of dynamical grammar changes for variable "probe" example
value "EchoPingChargen".) - EchoPingDNS: (See the separate module documentation for details about
each variable.)
The following new variables are valid: - dns_request
see above - dns_tcp
see above - dns_type
see above - extraopts
see above - ipversion
see above - pings
see above - plugin
see above - pluginargs
see above - priority
see above - timeout
see above - tos see above
- waittime
see above - Syntax changes for subsection /[-_0-9a-zA-Z.]+/
The following new variables are valid:- dns_request
see above - This variable inherits its value from the parent section if nothing is specified here.
- dns_tcp
see above - This variable inherits its value from the parent section if nothing is specified here.
- dns_type
see above - This variable inherits its value from the parent section if nothing is specified here.
- extraopts
see above - This variable inherits its value from the parent section if nothing is specified here.
- ipversion
see above - This variable inherits its value from the parent section if nothing is specified here.
- pings
see above - This variable inherits its value from the parent section if nothing is specified here.
- plugin
see above - This variable inherits its value from the parent section if nothing is specified here.
- pluginargs
see above - This variable inherits its value from the parent section if nothing is specified here.
- priority
see above - This variable inherits its value from the parent section if nothing is specified here.
- timeout
see above - This variable inherits its value from the parent section if nothing is specified here.
- tos see above
This variable inherits its value from the parent section if nothing is specified here.waittime
see aboveThis variable inherits its value from the parent section if nothing is specified here. - (End of dynamical grammar changes for variable "probe" example
value "EchoPingDNS".) - EchoPingDiscard: (See the separate module documentation for details
about each variable.)
The following new variables are valid: - extraopts
see above - fill
see above - ipversion
see above - pings
see above - priority
see above - size
see above - timeout
see above - tos see above
- udp see above
- waittime
see above - Syntax changes for subsection /[-_0-9a-zA-Z.]+/
The following new variables are valid:- extraopts
see above - This variable inherits its value from the parent section if nothing is specified here.
- fill
see above - This variable inherits its value from the parent section if nothing is specified here.
- ipversion
see above - This variable inherits its value from the parent section if nothing is specified here.
- pings
see above - This variable inherits its value from the parent section if nothing is specified here.
- priority
see above - This variable inherits its value from the parent section if nothing is specified here.
- size
see above - This variable inherits its value from the parent section if nothing is specified here.
- timeout
see above - This variable inherits its value from the parent section if nothing is specified here.
- tos see above
This variable inherits its value from the parent section if nothing is specified here.udp see above
This variable inherits its value from the parent section if nothing is specified here.waittime
see aboveThis variable inherits its value from the parent section if nothing is specified here. - (End of dynamical grammar changes for variable "probe" example
value "EchoPingDiscard".) - EchoPingHttp: (See the separate module documentation for details about
each variable.)
The following new variables are valid: - accept_redirects
see above - extraopts
see above - ignore_cache
see above - ipversion
see above - pings
see above - port
see above - priority
see above - revalidate_data
see above - timeout
see above - tos see above
- url see above
- waittime
see above - Syntax changes for subsection /[-_0-9a-zA-Z.]+/
The following new variables are valid:- accept_redirects
see above - This variable inherits its value from the parent section if nothing is specified here.
- extraopts
see above - This variable inherits its value from the parent section if nothing is specified here.
- ignore_cache
see above - This variable inherits its value from the parent section if nothing is specified here.
- ipversion
see above - This variable inherits its value from the parent section if nothing is specified here.
- pings
see above - This variable inherits its value from the parent section if nothing is specified here.
- port
see above - This variable inherits its value from the parent section if nothing is specified here.
- priority
see above - This variable inherits its value from the parent section if nothing is specified here.
- revalidate_data
see above - This variable inherits its value from the parent section if nothing is specified here.
- timeout
see above - This variable inherits its value from the parent section if nothing is specified here.
- tos see above
This variable inherits its value from the parent section if nothing is specified here.url see above
This variable inherits its value from the parent section if nothing is specified here.waittime
see aboveThis variable inherits its value from the parent section if nothing is specified here. - (End of dynamical grammar changes for variable "probe" example
value "EchoPingHttp".) - EchoPingHttps: (See the separate module documentation for details about
each variable.)
The following new variables are valid: - accept_redirects
see above - extraopts
see above - ignore_cache
see above - ipversion
see above - pings
see above - port
see above - priority
see above - revalidate_data
see above - timeout
see above - tos see above
- url see above
- waittime
see above - Syntax changes for subsection /[-_0-9a-zA-Z.]+/
The following new variables are valid:- accept_redirects
see above - This variable inherits its value from the parent section if nothing is specified here.
- extraopts
see above - This variable inherits its value from the parent section if nothing is specified here.
- ignore_cache
see above - This variable inherits its value from the parent section if nothing is specified here.
- ipversion
see above - This variable inherits its value from the parent section if nothing is specified here.
- pings
see above - This variable inherits its value from the parent section if nothing is specified here.
- port
see above - This variable inherits its value from the parent section if nothing is specified here.
- priority
see above - This variable inherits its value from the parent section if nothing is specified here.
- revalidate_data
see above - This variable inherits its value from the parent section if nothing is specified here.
- timeout
see above - This variable inherits its value from the parent section if nothing is specified here.
- tos see above
This variable inherits its value from the parent section if nothing is specified here.url see above
This variable inherits its value from the parent section if nothing is specified here.waittime
see aboveThis variable inherits its value from the parent section if nothing is specified here. - (End of dynamical grammar changes for variable "probe" example
value "EchoPingHttps".) - EchoPingIcp: (See the separate module documentation for details about
each variable.)
The following new variables are valid: - extraopts
see above - ipversion
see above - pings
see above - priority
see above - timeout
see above - tos see above
- url see above
- waittime
see above - Syntax changes for subsection /[-_0-9a-zA-Z.]+/
The following new variables are valid:- extraopts
see above - This variable inherits its value from the parent section if nothing is specified here.
- ipversion
see above - This variable inherits its value from the parent section if nothing is specified here.
- pings
see above - This variable inherits its value from the parent section if nothing is specified here.
- priority
see above - This variable inherits its value from the parent section if nothing is specified here.
- timeout
see above - This variable inherits its value from the parent section if nothing is specified here.
- tos see above
This variable inherits its value from the parent section if nothing is specified here.url see above
This variable inherits its value from the parent section if nothing is specified here.waittime
see aboveThis variable inherits its value from the parent section if nothing is specified here. - (End of dynamical grammar changes for variable "probe" example
value "EchoPingIcp".) - EchoPingLDAP: (See the separate module documentation for details about
each variable.)
The following new variables are valid: - extraopts
see above - ipversion
see above - ldap_base
see above - ldap_request
see above - ldap_scope
see above - pings
see above - plugin
see above - pluginargs
see above - priority
see above - timeout
see above - tos see above
- waittime
see above - Syntax changes for subsection /[-_0-9a-zA-Z.]+/
The following new variables are valid:- extraopts
see above - This variable inherits its value from the parent section if nothing is specified here.
- ipversion
see above - This variable inherits its value from the parent section if nothing is specified here.
- ldap_base
see above - This variable inherits its value from the parent section if nothing is specified here.
- ldap_request
see above - This variable inherits its value from the parent section if nothing is specified here.
- ldap_scope
see above - This variable inherits its value from the parent section if nothing is specified here.
- pings
see above - This variable inherits its value from the parent section if nothing is specified here.
- plugin
see above - This variable inherits its value from the parent section if nothing is specified here.
- pluginargs
see above - This variable inherits its value from the parent section if nothing is specified here.
- priority
see above - This variable inherits its value from the parent section if nothing is specified here.
- timeout
see above - This variable inherits its value from the parent section if nothing is specified here.
- tos see above
This variable inherits its value from the parent section if nothing is specified here.waittime
see aboveThis variable inherits its value from the parent section if nothing is specified here. - (End of dynamical grammar changes for variable "probe" example
value "EchoPingLDAP".) - EchoPingPlugin: (See the separate module documentation for details
about each variable.)
The following new variables are valid: - extraopts
see above - ipversion
see above - pings
see above - plugin
see above - pluginargs
see above - priority
see above - timeout
see above - tos see above
- waittime
see above - Syntax changes for subsection /[-_0-9a-zA-Z.]+/
The following new variables are valid:- extraopts
see above - This variable inherits its value from the parent section if nothing is specified here.
- ipversion
see above - This variable inherits its value from the parent section if nothing is specified here.
- pings
see above - This variable inherits its value from the parent section if nothing is specified here.
- plugin
see above - This variable inherits its value from the parent section if nothing is specified here.
- pluginargs
see above - This variable inherits its value from the parent section if nothing is specified here.
- priority
see above - This variable inherits its value from the parent section if nothing is specified here.
- timeout
see above - This variable inherits its value from the parent section if nothing is specified here.
- tos see above
This variable inherits its value from the parent section if nothing is specified here.waittime
see aboveThis variable inherits its value from the parent section if nothing is specified here. - (End of dynamical grammar changes for variable "probe" example
value "EchoPingPlugin".) - EchoPingSmtp: (See the separate module documentation for details about
each variable.)
The following new variables are valid: - extraopts
see above - ipversion
see above - pings
see above - priority
see above - timeout
see above - tos see above
- waittime
see above - Syntax changes for subsection /[-_0-9a-zA-Z.]+/
The following new variables are valid:- extraopts
see above - This variable inherits its value from the parent section if nothing is specified here.
- ipversion
see above - This variable inherits its value from the parent section if nothing is specified here.
- pings
see above - This variable inherits its value from the parent section if nothing is specified here.
- priority
see above - This variable inherits its value from the parent section if nothing is specified here.
- timeout
see above - This variable inherits its value from the parent section if nothing is specified here.
- tos see above
This variable inherits its value from the parent section if nothing is specified here.waittime
see aboveThis variable inherits its value from the parent section if nothing is specified here. - (End of dynamical grammar changes for variable "probe" example
value "EchoPingSmtp".) - EchoPingWhois: (See the separate module documentation for details about
each variable.)
The following new variables are valid: - extraopts
see above - ipversion
see above - pings
see above - plugin
see above - pluginargs
see above - priority
see above - timeout
see above - tos see above
- waittime
see above - whois_request
see above - Syntax changes for subsection /[-_0-9a-zA-Z.]+/
The following new variables are valid:- extraopts
see above - This variable inherits its value from the parent section if nothing is specified here.
- ipversion
see above - This variable inherits its value from the parent section if nothing is specified here.
- pings
see above - This variable inherits its value from the parent section if nothing is specified here.
- plugin
see above - This variable inherits its value from the parent section if nothing is specified here.
- pluginargs
see above - This variable inherits its value from the parent section if nothing is specified here.
- priority
see above - This variable inherits its value from the parent section if nothing is specified here.
- timeout
see above - This variable inherits its value from the parent section if nothing is specified here.
- tos see above
This variable inherits its value from the parent section if nothing is specified here.waittime
see aboveThis variable inherits its value from the parent section if nothing is specified here.whois_request
see aboveThis variable inherits its value from the parent section if nothing is specified here. - (End of dynamical grammar changes for variable "probe" example
value "EchoPingWhois".) - FPing: (See the separate module documentation for details about each
variable.)
No changes that can be automatically described. - (End of dynamical grammar changes for variable "probe" example
value "FPing".) - FPing6: (See the separate module documentation for details about each
variable.)
No changes that can be automatically described. - (End of dynamical grammar changes for variable "probe" example
value "FPing6".) - FTPtransfer: (See the separate module documentation for details about
each variable.)
The following new variables are valid: - localaddr
see above - passive
see above - password
see above - pings
see above - port
see above - timeout
see above - username
see above - Syntax changes for subsection /[-_0-9a-zA-Z.]+/
The following new variables are valid:- localaddr
see above - This variable inherits its value from the parent section if nothing is specified here.
- passive
see above - This variable inherits its value from the parent section if nothing is specified here.
- password
see above - This variable inherits its value from the parent section if nothing is specified here.
- pings
see above - This variable inherits its value from the parent section if nothing is specified here.
- port
see above - This variable inherits its value from the parent section if nothing is specified here.
- timeout
see above - This variable inherits its value from the parent section if nothing is specified here.
- username
see above - This variable inherits its value from the parent section if nothing is specified here.
- (End of dynamical grammar changes for variable "probe" example
value "FTPtransfer".) - IOSPing: (See the separate module documentation for details about each
variable.)
The following new variables are valid: - ioshost
see above - iosint
see above - iosuser
see above - pings
see above - Syntax changes for subsection /[-_0-9a-zA-Z.]+/
The following new variables are valid:- ioshost
see above - This variable inherits its value from the parent section if nothing is specified here.
- iosint
see above - This variable inherits its value from the parent section if nothing is specified here.
- iosuser
see above - This variable inherits its value from the parent section if nothing is specified here.
- pings
see above - This variable inherits its value from the parent section if nothing is specified here.
- (End of dynamical grammar changes for variable "probe" example
value "IOSPing".) - LDAP: (See the separate module documentation for details about each
variable.)
The following new variables are valid: - attrs
see above - base
see above - binddn
see above - filter
see above - mininterval
see above - password
see above - pings
see above - port
see above - scope
see above - start_tls
see above - timeout
see above - version
see above - Syntax changes for subsection /[-_0-9a-zA-Z.]+/
The following new variables are valid:- attrs
see above - This variable inherits its value from the parent section if nothing is specified here.
- base
see above - This variable inherits its value from the parent section if nothing is specified here.
- binddn
see above - This variable inherits its value from the parent section if nothing is specified here.
- filter
see above - This variable inherits its value from the parent section if nothing is specified here.
- mininterval
see above - This variable inherits its value from the parent section if nothing is specified here.
- password
see above - This variable inherits its value from the parent section if nothing is specified here.
- pings
see above - This variable inherits its value from the parent section if nothing is specified here.
- port
see above - This variable inherits its value from the parent section if nothing is specified here.
- scope
see above - This variable inherits its value from the parent section if nothing is specified here.
- start_tls
see above - This variable inherits its value from the parent section if nothing is specified here.
- timeout
see above - This variable inherits its value from the parent section if nothing is specified here.
- version
see above - This variable inherits its value from the parent section if nothing is specified here.
- (End of dynamical grammar changes for variable "probe" example
value "LDAP".) - Radius: (See the separate module documentation for details about each
variable.)
The following new variables are valid: - mininterval
see above - nas_ip_address
see above - password
see above - pings
see above - port
see above - secret
see above - timeout
see above - username
see above - Syntax changes for subsection /[-_0-9a-zA-Z.]+/
The following new variables are valid:- mininterval
see above - This variable inherits its value from the parent section if nothing is specified here.
- nas_ip_address
see above - This variable inherits its value from the parent section if nothing is specified here.
- password
see above - This variable inherits its value from the parent section if nothing is specified here.
- pings
see above - This variable inherits its value from the parent section if nothing is specified here.
- port
see above - This variable inherits its value from the parent section if nothing is specified here.
- secret
see above - This variable inherits its value from the parent section if nothing is specified here.
- timeout
see above - This variable inherits its value from the parent section if nothing is specified here.
- username
see above - This variable inherits its value from the parent section if nothing is specified here.
- (End of dynamical grammar changes for variable "probe" example
value "Radius".) - RemoteFPing: (See the separate module documentation for details about
each variable.)
No changes that can be automatically described. - (End of dynamical grammar changes for variable "probe" example
value "RemoteFPing".) - SSH: (See the separate module documentation for details about each
variable.)
The following new variables are valid: - keytype
see above - pings
see above - port
see above - Syntax changes for subsection /[-_0-9a-zA-Z.]+/
The following new variables are valid:- keytype
see above - This variable inherits its value from the parent section if nothing is specified here.
- pings
see above - This variable inherits its value from the parent section if nothing is specified here.
- port
see above - This variable inherits its value from the parent section if nothing is specified here.
- (End of dynamical grammar changes for variable "probe" example
value "SSH".) - TCPPing: (See the separate module documentation for details about each
variable.)
The following new variables are valid: - pings
see above - port
see above - Syntax changes for subsection /[-_0-9a-zA-Z.]+/
The following new variables are valid:- pings
see above - This variable inherits its value from the parent section if nothing is specified here.
- port
see above - This variable inherits its value from the parent section if nothing is specified here.
- (End of dynamical grammar changes for variable "probe" example
value "TCPPing".) - TacacsPlus: (See the separate module documentation for details about
each variable.)
The following new variables are valid: - authtype
see above - mininterval
see above - password
see above - pings
see above - port
see above - secret
see above - timeout
see above - username
see above - Syntax changes for subsection /[-_0-9a-zA-Z.]+/
The following new variables are valid:- authtype
see above - This variable inherits its value from the parent section if nothing is specified here.
- mininterval
see above - This variable inherits its value from the parent section if nothing is specified here.
- password
see above - This variable inherits its value from the parent section if nothing is specified here.
- pings
see above - This variable inherits its value from the parent section if nothing is specified here.
- port
see above - This variable inherits its value from the parent section if nothing is specified here.
- secret
see above - This variable inherits its value from the parent section if nothing is specified here.
- timeout
see above - This variable inherits its value from the parent section if nothing is specified here.
- username
see above - This variable inherits its value from the parent section if nothing is specified here.
- (End of dynamical grammar changes for variable "probe" example
value "TacacsPlus".) - TelnetIOSPing: (See the separate module documentation for details about
each variable.)
The following new variables are valid: - iospass
see above - iosuser
see above - pings
see above - psource
see above - source
see above - Syntax changes for subsection /[-_0-9a-zA-Z.]+/
The following new variables are valid:- iospass
see above - This variable inherits its value from the parent section if nothing is specified here.
- iosuser
see above - This variable inherits its value from the parent section if nothing is specified here.
- pings
see above - This variable inherits its value from the parent section if nothing is specified here.
- psource
see above - This variable inherits its value from the parent section if nothing is specified here.
- source
see above - This variable inherits its value from the parent section if nothing is specified here.
- (End of dynamical grammar changes for variable "probe" example
value "TelnetIOSPing".) - TelnetJunOSPing: (See the separate module documentation for details
about each variable.)
The following new variables are valid: - junospass
see above - junosuser
see above - pings
see above - psource
see above - source
see above - Syntax changes for subsection /[-_0-9a-zA-Z.]+/
The following new variables are valid:- junospass
see above - This variable inherits its value from the parent section if nothing is specified here.
- junosuser
see above - This variable inherits its value from the parent section if nothing is specified here.
- pings
see above - This variable inherits its value from the parent section if nothing is specified here.
- psource
see above - This variable inherits its value from the parent section if nothing is specified here.
- source
see above - This variable inherits its value from the parent section if nothing is specified here.
- (End of dynamical grammar changes for variable "probe" example
value "TelnetJunOSPing".) - WebProxyFilter: (See the separate module documentation for details
about each variable.)
The following new variables are valid: - deny_re
see above - more_hosts
see above - pings
see above - timeout
see above - Syntax changes for subsection /[-_0-9a-zA-Z.]+/
The following new variables are valid:- deny_re
see above - This variable inherits its value from the parent section if nothing is specified here.
- more_hosts
see above - This variable inherits its value from the parent section if nothing is specified here.
- pings
see above - This variable inherits its value from the parent section if nothing is specified here.
- timeout
see above - This variable inherits its value from the parent section if nothing is specified here.
- (End of dynamical grammar changes for variable "probe" example
value "WebProxyFilter".) - (End of dynamical grammar changes for example values of variable
"probe".) - *** Alerts ***
- The Alert section lets you setup loss and RTT pattern detectors. After
each round of polling, SmokePing will examine its data and determine
which detectors match. Detectors are enabled per target and get
inherited by the targets children. - Detectors are not just simple thresholds which go off at first sight of
a problem. They are configurable to detect special loss or RTT
patterns. They let you look at a number of past readings to make a more educated decision on what kind of alert should be sent, or if an alert should be sent at all. - The patterns are numbers prefixed with an operator indicating the type of comparison required for a match.
- The following RTT pattern detects if a target's RTT goes from
constantly below 10ms to constantly 100ms and more:
old ------------------------------> new
<10,<10,<10,<10,<10,>10,>100,>100,>100- Loss patterns work in a similar way, except that the loss is defined as
the percentage the total number of received packets is of the total
number of packets sent.
old ------------------------------> new
==0%,==0%,==0%,==0%,>20%,>20%,>=20%- Apart from normal numbers, patterns can also contain the values * which is true for all values regardless of the operator. And U which is true for unknown data together with the == and =! operators.
- Detectors normally act on state changes. This has the disadvantage,
that they will fail to find conditions which were already present when launching smokeping. For this it is possible to write detectors that
begin with the special value ==S it is inserted whenever smokeping is started up. - You can write
==S,>20%,>20%- to detect lines that have been losing more than 20% of the packets for two periods after startup.
- Sometimes it may be that conditions occur at irregular intervals. But
still you only want to throw an alert if they occur several times
within a certain amount of times. The operator *X* will ignore up to X values and still let the pattern match:
>10%,*10*,>10%- will fire if more than 10% of the packets have been lost at least twice over the last 10 samples.
- A complete example
*** Alerts ***
to = admin@company.xy,peter@home.xy
from = smokealert@company.xy- +lossdetect
type = loss
# in percent
pattern = ==0%,==0%,==0%,==0%,>20%,>20%,>20%
comment = suddenly there is packet loss - +miniloss
type = loss
# in percent
pattern = >0%,*12*,>0%,*12*,>0%
comment = detected loss 3 times over the last two hours - +rttdetect
type = rtt
# in milliseconds
pattern = <10,<10,<10,<10,<10,<100,>100,>100,>100
comment = routing messed up again ? - +rttbadstart
type = rtt
# in milliseconds
pattern = ==S,==U
comment = offline at startup - The following variables can be set in this section:
- to (mandatory setting)
Either an email address to send alerts to, or the name of a program to execute when an alert matches. To call a program, the first
character of the to value must be a pipe symbol "|". The program will the be called whenever an alert matches, using the following 5 arguments (except if edgetrigger is 'yes'; see below): name-ofalert, target, loss-pattern, rtt-pattern, hostname. You can also provide a comma separated list of addresses and programs. - from (mandatory setting)
who should alerts appear to be coming from ? - edgetrigger
The alert notifications and/or the programs executed are normally
triggered every time the alert matches. If this variable is set to 'yes', they will be triggered only when the alert's state is
changed, ie. when it's raised and when it's cleared. Subsequent
matches of the same alert will thus not trigger a notification. - When this variable is set to 'yes', a notification program (see the to variable documentation above) will get a sixth argument, raise, which has the value 1 if the alert was just raised and 0 if it was cleared.
- Default value: edgetrigger = no
- mailtemplate
When sending out mails for alerts, smokeping normally uses an
internally generated message. With the mailtemplate you can
customize the alert mails to look they way you like them. The all
<##keyword##> type strings will get replaced in the template before it is sent out. the following keywords are supported:
<##ALERT##> - target name
<##WHAT##> - status (is active, was raised, was celared)
<##LINE##> - path in the config tree
<##URL##> - webpage for graph
<##STAMP##> - date and time
<##PAT##> - pattern that matched the alert
<##LOSS##> - loss history
<##RTT##> - rtt history
<##COMMENT##> - comment- The following sections are valid on level 1:
- +/[^\s,]+/
The following variables can be set in this section: - type (mandatory setting) Currently the pattern types rtt and loss and matcher are known.
- Matchers are plugin modules that extend the alert conditions.
Known matchers are Avgratio, CheckLatency, CheckLoss, Median,
Medratio. - See the documentation of the corresponding matcher module (eg. Smokeping::matchers::Avgratio) for instructions on configuring it.
- pattern (mandatory setting) a comma separated list of comparison operators and numbers. rtt patterns are in milliseconds, loss patterns are in percents
- comment (mandatory setting)
to Similar to the "to" parameter on the top-level except that it
will only be used IN ADDITION to the value of the toplevel
parameter. Same rules apply. - edgetrigger
This variable inherits its value from the parent section if nothing is specified here. - Default value: edgetrigger = no
- mailtemplate
This variable inherits its value from the parent section if nothing is specified here. - priority
if multiple alerts 'match' only the one with the highest
priority (lowest number) will cause and alert to be sent.
Alerts without priority will be sent in any case. - *** Slaves ***
- Your smokeping can remote control other somkeping instances running in
slave mode on different hosts. Use this section to tell your master
smokeping about the slaves you are going to use. - The following variables can be set in this section:
- secrets (mandatory setting) The slave secrets file contines one line per slave with the name of the slave followed by a colon and the secret:
slave1:secret1
slave2:secret2
...- Note that these secrets combined with a man-in-the-middle attack
effectively give shell access to the corresponding slaves (see
smokeping_master_slave), so the file should be appropriately
protected and the secrets should not be easily crackable. - The following sections are valid on level 1:
- +/[-_0-9a-zA-Z.]+/
Define some basic properties for the slave. - The following variables can be set in this section:
- display_name (mandatory setting) Name of the Slave host.
- location
Where is the slave located. - color (mandatory setting)
Color for the slave in graphs where input from multiple hosts
is presented. - The following sections are valid on level 2:
- ++override
If part of the configuration information must be overwritten to match the settings of the you can specify this in this section. A setting is overwritten by giveing the full path of the
configuration variable. If you have this configuration in the
Probes section:
*** Probes ***
+FPing
binary = /usr/sepp/bin/fping- You can override it for a particular slave like this:
++override
Probes.FPing.binary = /usr/bin/fpingThe following variables can be set in this section:/\S+/
COPYRIGHT
Copyright (c) 2001-2007 by Tobias Oetiker. All right reserved.
LICENSE
This program is free software; you can redistribute it and/or modify it
under the terms of the GNU General Public License as published by the
Free Software Foundation; either version 2 of the License, or (at your
option) any later version.
This program is distributed in the hope that it will be useful, but
WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
General Public License for more details.
You should have received a copy of the GNU General Public License along
with this program; if not, write to the Free Software Foundation, Inc.,
675 Mass Ave, Cambridge, MA 02139, USA.
AUTHOR
- Tobias Oetiker <tobi@oetiker.ch>