task-color(5)
NAME
task-color - A color tutorial for the task(1) command line todo manager.
SETUP
- The first thing you need is a terminal program that supports color.
All terminal programs support color, but only a few support lots of
colors. First tell your terminal program to use color by specifying
the TERM environment variable like this:
- TERM=xterm-color
- In this example, xterm-color is used - a common value, and one that doesn't require that you use xterm. This works for most setups. This setting belongs in your shell profile (~/.bash_profile, ~/.bashrc, ~/.cshrc etc, depending on which shell you use). If this is a new setting, you will need to either run that profile script, or close and reopen the terminal window (which does the same thing).
- Now tell task that you want to use color. This is the default for task, so the following step may be unnecessary.
$ task config color on- This command will make sure there is an entry in your ~/.taskrc file that looks like:
color=on- Now task is ready.
AUTOMATIC MONOCHROME
- It should be mentioned that task is aware of whether it's output is
going to a terminal, or to a file or through a pipe. When task output
goes to a terminal, color is desirable, but consider the following command:
- $ task list > file.txt
- Do we really want all those color control codes in the file? Task assumes that you do not, and temporarily sets color to 'off' while generating the output. This explains the output from the following command:
$ task config | grep '^color '
color off- it always returns 'off', no matter what the setting.
- The reason is that the task output gets piped into grep, and the color is disabled. If you wanted those color codes, you can override this behavior by setting the _forcecolor variable to on, like this:
$ task config _forcecolor on
$ task config | grep '^color '
color on- or by temporarily overriding it like this:
$ task rc._forcecolor=on config | grep '^color '
color on
AVAILABLE COLORS
- Task has a 'color' command that will show all the colors it is capable
of displaying. Try this:
- $ task color
- The output cannot be replicated here in a man page, but you should see a set of color samples. How many you see depends on your terminal program's ability to render them.
- You should at least see the Basic colors and Effects - if you do, then you have 16-color support. If your terminal supports 256 colors, you'll know it!
- 16-COLOR SUPPORT
The basic color support is provided through named colors:
black, red, blue, green, magenta, cyan, yellow, white- Foreground color (for text) is simply specified as one of the above colors, or not specified at all to use the default terminal text color.
- Background color is specified by using the word 'on', and one of the above colors. Some examples:
green # green text, default background color
green on yellow # green text, yellow background
on yellow # default text color, yellow background- These colors can be modified further, by making the foreground bold, or by making the background bright. Some examples:
bold green
bold white on bright red
on bright cyan- The order of the words is not important, so the following are equivalent:
bold green
green bold- But the 'on' is important - colors before the 'on' are foreground, and colors after 'on' are background.
- There is an additional 'underline' attribute that may be used:
underline bright red on black- Task has a command that helps you visualize these color combinations. Try this:
$ task color underline bright red on black- You can use this command to see how the various color combinations work. You will also see some sample colors displayed, like the ones above, in addition to the sample requested.
- Some combinations look very nice, some look terrible. Different terminal programs do implement slightly different versions of 'red', for example, so you may see some unwanted variation due to the program. The brightness of your display is also a factor.
- 256-COLOR SUPPORT
Using 256 colors follows the same form, but the names are different, and some colors can be referenced in different ways. First there is by color ordinal, which is like this:
color0
color1
color2
...
color255- This gives you access to all 256 colors, but doesn't help you much. This range is a combination of 8 basic colors (color0 - color7), then 8 brighter variations (color8 - color15). Then a block of 216 colors (color16 - color231). Then a block of 24 gray colors (color232 color255).
- The large block of 216 colors (6x6x6 = 216) represents a color cube, which can be addressed via RGB values from 0 to 5 for each component color. A value of 0 means none of this component color, and a value of 5 means the most intense component color. For example, a bright red is specified as:
rgb500- And a darker red would be:
rgb300- Note that the three digits represent the three component values, so in this example the 5, 0 and 0 represent red=5, green=0, blue=0. Combining intense red with no green and no blue yields red. Similarly, blue and green are:
rgb005
rgb050- Another example - bright yellow - is a mix of bright red and bright green, but no blue component, so bright yellow is addressed as:
rgb550- A soft pink would be addressed as:
rgb515- See if you agree, by running:
$ task color black on rgb515- You may notice that the large color block is represented as 6 squares. All colors in the first square have a red value of 0. All colors in the 6th square have a red value of 5. Within each square, blue ranges from 0 to 5 left to right, and within each square green ranges from 0 to 5, top to bottom. This scheme takes some getting used to.
- The block of 24 gray colors can also be accessed as gray0 - gray23, in a continuous ramp from black to white.
MIXING 16- AND 256-COLORS
If you specify 16-colors, and view on a 256-color terminal, no problem.
If you try the reverse, specifying 256-colors and viewing on a 16-color
terminal, you will be disappointed, perhaps even appalled.
- There is some limited color mapping - for example, if you were to specify this combination:
- red on gray3
- you are mixing a 16-color and 256-color specification. Task will map red to color1, and proceed. Note that red and color1 are not quite the same.
- Note also that there is no bold or bright attributes when dealing with 256 colors, but there is still underline available.
RULES
- Task supports colorization rules. These are configuration values that
specify a color, and the conditions under which that color is used. By
example, let's add a few tasks:
- $ task add project:Home priority:H pay the bills (1) $ task add project:Home clean the rug (2) $ task add project:Garden clean out the garage (3)
- We can add a color rule that uses a blue background for all tasks in the Home project:
$ task config color.project.Home on blue- We use quotes around "on blue" because there are two words, but they represent one value in the .taskrc file. Now suppose we which to use a bold yellow text color for all cleaning work:
$ task config color.keyword.clean bold yellow- Now what happens to task 2, which belongs to project Home (blue background), and is also a cleaning task (bold yellow foreground)? The colors are combined, and the task is shown as "bold yellow on blue".
- Color rules can be applied by project and description keyword, as shown, and also by priority (or lack of priority), by active status, by being due or overdue, by being tagged, or having a specific tag (perhaps the most useful rule) or by being a recurring task.
- It is possible to create a very colorful mix of rules. With 256-color support, those colors can be made subtle, and complementary, but without care, this can be a visual mess. Beware!
THEMES
Task supports themes. What this really means is that with the ability
to include other files into the .taskrc file, different sets of color
rules can be included.
- To get a good idea of what a color theme looks like, try adding this
entry to your .taskrc file:
- include /usr/local/share/doc/task/rc/dark-256.theme
- You can use any of the standard task themes:
light-16.theme
light-256.theme
dark-16.theme
dark-256.theme
dark-red-256.theme
dark-green-256.theme
dark-blue-256.theme- Better yet, create your own, and share it. We will gladly host the theme file on <http://taskwarrior.org>.
CREDITS & COPYRIGHTS
task was written by P. Beckingham <paul@beckingham.net>.
Copyright (C) 2006 - 2010 P. Beckingham
This man page was originally written by Paul Beckingham.
task is distributed under the GNU General Public License. See
http://www.gnu.org/licenses/gpl-2.0.txt for more information.
SEE ALSO
task(1), taskrc(5), task-faq(5) task-tutorial(5)
For more information regarding task, the following may be referenced:
- The official site at
- <http://taskwarrior.org>
- The official code repository at
- <git://tasktools.org/task.git/>
- You can contact the project by writing an email to
- <support@taskwarrior.org>
REPORTING BUGS
- Bugs in task may be reported to the issue-tracker at
- <http://taskwarrior.org>