cyberpower(8)
NAME
cyberpower - Serial Driver for most Cyber Power Systems UPS equipment
NOTE
This man page only documents the hardware-specific features of the
cyberpower driver. For information about the core driver, see nutupsdrv(8).
SUPPORTED HARDWARE
This driver supports connections over a serial port for most AVR models. It was developed on the 700AVR, but has also been reported to
work on the 320AVR, 500AVR, 650AVR, 800AVR, 850AVR, 900AVR, 1250AVR,
and 1500AVR.
The Power99 device is not supported by this driver (use the genericups
driver instead). Also, CPS825VA, 1100AVR, and 1500AVR-HO are not supported (try the cpsups driver instead).
This driver does not support connections over a USB port. To connect to
a Cyber Power UPS over a USB port, use the usbhid-ups driver. This has
been reported to work for the 685AVR and possibly other models.
EXTRA ARGUMENTS
This driver does not support any extra settings in the ups.conf(5).
BUGS
The protocol for this UPS is not officially documented.
Some variables may not be reported correctly on models other than those
used by the developers. This is partly due to the strange nonlinear
relations between the reported values and their meanings on this hardware.
SEE ALSO
- The core driver:
- nutupsdrv(8)
- Internet resources:
- The NUT (Network UPS Tools) home page: http://www.networkupstools.org/