hostapd_cli(8)

NAME

hostapd_cli - text-based frontend program for interacting
with hostapd(8)

SYNOPSIS

hostapd_cli [commands]

DESCRIPTION

The hostapd_cli utility is a text-based frontend program for
interacting
with hostapd(8). It is used to query the current status.
The hostapd_cli utility can show the current authentication
status, dot11
and dot1x MIBs, etc.
The hostapd_cli utility supports two modes: interactive and
command line.
Both modes share the same command set.
Interactive mode is started when hostapd_cli is executed
without any
parameters on the command line. Commands are then entered
from the controlling terminal in response to the hostapd_cli prompt. In
command line
mode, the same commands are entered as command line argu
ments.

COMMANDS

The following commands may be supplied on the command line
or at a prompt
when operating interactively.
mib Report MIB variables (dot1x, dot11) for the current
interface.
sta addr
Report the MIB variables for the associated station
with MAC
address addr.
all_sta
Report the MIB variables for all associated sta
tions.
help Show usage help.
interface [ifname]
Show available interfaces and/or set the current in
terface when
multiple are available.
level debug_level
Change the debugging level in hostapd(8). Larger
numbers generate more messages.
license
Display the full license for hostapd_cli.
quit Exit hostapd_cli.

SEE ALSO

hostapd.conf(5), hostapd(8)

HISTORY

The hostapd_cli utility first appeared in FreeBSD 6.0.

AUTHORS

The hostapd_cli utility was written by Jouni Malinen <jkmaline@cc.hut.fi>. This manual page is derived from the
README file
included in the hostapd distribution.
BSD June 16, 2005
Copyright © 2010-2024 Platon Technologies, s.r.o.           Home | Man pages | tLDP | Documents | Utilities | About
Design by styleshout