LOSETUP(8)
NAME
losetup - set up and control loop devices
SYNOPSIS
Get info:
losetup loopdev
losetup -a
losetup -j file [-o offset]
Delete loop:
losetup -d loopdev...
Print name of first unused loop device:
losetup -f
Setup loop device:
losetup [{-e|-E} encryption] [-o offset] [--sizelimit limit]
[-p pfd] [-r] {-f[--show]|loopdev} file
Resize loop device:
losetup -c loopdev
DESCRIPTION
- losetup is used to associate loop devices with regular files or block
devices, to detach loop devices and to query the status of a loop
device. If only the loopdev argument is given, the status of the corresponding loop device is shown.
- Encryption
- It is possible to specify transfer functions (for encryption/decryption or other purposes) using one of the -E and -e options. There are two mechanisms to specify the desired encryption: by number and by name. If an encryption is specified by number then one has to make sure that the Linux kernel knows about the encryption with that number, probably by patching the kernel. Standard numbers that are always present are 0 (no encryption) and 1 (XOR encryption). When the cryptoloop module is loaded (or compiled in), it uses number 18. This cryptoloop module will take the name of an arbitrary encryption type and find the module that knows how to perform that encryption.
OPTIONS
- -a, --all
- show status of all loop devices
- -c, --set-capacity loopdev
- force loop driver to reread size of the file associated with the specified loop device
- -d, --detach loopdev...
- detach the file or device associated with the specified loop device(s)
- -e, -E, --encryption encryption_type
- enable data encryption with specified name or number
- -f, --find
- find the first unused loop device. If a file argument is present, use this device. Otherwise, print its name
- -h, --help
- print help
- -j, --associated file
- show status of all loop devices associated with given file
- -k, --keybits num
- set the number of bits to use in key to num.
- -N, --nohashpass
- Do not hash the password. By default, Debian systems run the password through a hash function, non-Debian systems tend not to.
- -o, --offset offset
- the data start is moved offset bytes into the specified file or device
- --sizelimit limit
- the data end is set to no more than sizelimit bytes after the data start
- -p, --pass-fd num
- read the passphrase from file descriptor with number num instead of from the terminal
- -r, --read-only
- setup read-only loop device
- --show print device name if the -f option and a file argument are
- present.
- The short form of this option (-s) is deprecated. This short form could be in collision with Loop-AES implementation where the same option is used for --sizelimit.
- -v, --verbose
- verbose mode
RETURN VALUE
losetup returns 0 on success, nonzero on failure. When losetup displays
the status of a loop device, it returns 1 if the device is not configured and 2 if an error occurred which prevented losetup from determining the status of the device.
FILES
/dev/loop0, /dev/loop1, ... loop devices (major=7)
EXAMPLE
- If you are using the loadable module you must have the module loaded
first with the command
- # modprobe loop
- Maybe also encryption modules are needed.
# modprobe des # modprobe cryptoloop- The following commands can be used as an example of using the loop device.
# dd if=/dev/zero of=/file bs=1k count=100
# losetup -e des /dev/loop0 /file
Password:
Init (up to 16 hex digits):
# mkfs -t ext2 /dev/loop0 100
# mount -t ext2 /dev/loop0 /mnt...- # umount /dev/loop0
# losetup -d /dev/loop0 - If you are using the loadable module you may remove the module with the command
# rmmod loop
RESTRICTION
DES encryption is painfully slow. On the other hand, XOR is terribly
weak. Both are insecure nowadays. Some ciphers may require a licence
for you to be allowed to use them.
Cryptoloop is deprecated in favor of dm-crypt. For more details see
cryptsetup(8).
AVAILABILITY
- The losetup command is part of the util-linux-ng package and is available from ftp://ftp.kernel.org/pub/linux/utils/util-linux-ng/.