STONITH(8)

NAME

stonith - extensible interface for remotely powering down a node in the cluster

SYNOPSIS

stonith -h

stonith [-s] [-h] -L

stonith [-s] [-h] -t stonith-device-type -n

stonith [-s] [-h] -t stonith-device-type {name=value...  |
        -p stonith-device-parameters |
        -F stonith-device-parameters-file} [-c count] [-l] [-S]

stonith [-s] [-h] -t stonith-device-type {name=value...  |
        -p stonith-device-parameters |
        -F stonith-device-parameters-file} [-c count]
        [-T {reset | on | off}] [nodename]

DESCRIPTION

The STONITH module provides an extensible interface for remotely
powering down a node in the cluster (STONITH = Shoot The Other Node In The Head). The idea is quite simple: when the software running on one
machine wants to make sure another machine in the cluster is not using a resource, pull the plug on the other machine. It's simple and
reliable, albeit admittedly brutal.

OPTIONS

The following options are supported:

-c count

Perform any actions identified by the -l, -S and -T options count times.

-F stonith-device-parameters-file

Path of file specifying parameters for a stonith device. To
determine the syntax of the parameters file for a given device type run:

# stonith -t stonith-device-type -n

All of the listed parameters need to appear in order on a single
line in the parameters file and be delimited by whitespace.

-h

Display detailed information about a stonith device including
description, configuration information, parameters and any other
related information. When specified without a stonith-device-type, detailed information on all stonith devices is displayed.

If you don't yet own a stonith device and want to know more about
the ones we support, this information is likely to be helpful.

-L

List the valid stonith device types, suitable for passing as an
argument to the -t option.

-l

List the hosts controlled by the stonith device.

-n

Output the parameter names of the stonith device.

name=value

Parameter, in the form of a name/value pair, to pass directly to
the stonith device. To determine the syntax of the parameters for a given device type run:

# stonith -t stonith-device-type -n

All of the listed parameter names need to be passed with their
corresponding values.

-p stonith-device-parameters

Parameters to pass directly to the stonith device. To determine the syntax of the parameters for a given device type run:

# stonith -t stonith-device-type -n

All of the listed parameter names need to appear in order and be
delimited by whitespace.

-S

Show the status of the stonith device.

-s

Silent operation. Suppress logging of error messages to standard
error.

-T action

The stonith action to perform on the node identified by nodename.
Chosen from reset, on, and off.

Note
If a nodename is specified without the -T option, the stonith action defaults to reset.

-t stonith-device-type

The type of the stonith device to be used to effect stonith. A list of supported devices for an installation may be obtained using the -L option.

-v

Ignored.

EXAMPLES

To determine which stonith devices are available on your installation, use the -L option:

# stonith -L

All of the supported devices will be displayed one per line. Choose one from this list that is best for your environment - let's use wti_nps
for the rest of this example. To get detailed information about this
device, use the -h option:

# stonith -t wti_nps -h

Included in the output is the list of valid parameter names for
wti_nps. To get just the list of valid parameter names, use the -n option instead:

# stonith -t wti_nps -n

All of the required parameter names will be displayed one per line. For wti_nps the output is:

ipaddr
password

There are three ways to pass these parameters to the device. The first (and preferred) way is by passing name/value pairs on the stonith command line:

# stonith -t wti_nps ipaddr=my-dev-ip password=my-dev-pw ...

The second way, which is maintained only for backward compatibility
with legacy clusters, is passing the values in order on the stonith command line with the -p option:

# stonith -t wti_nps -p "my-dev-ip my-dev-pw" ...

The third way, which is also maintained only for backward compatibility with legacy clusters, is placing the values in order on a single line in a config file:

my-dev-ip my-dev-pw

... and passing the name of the file on the stonith command line with
the -F option:

# stonith -t wti_nps -F ~/my-wtinps-config ...

To make sure you have the configuration set up correctly and that the
device is available for stonith operations, use the -S option:

# stonith -t wti_nps ipaddr=my-dev-ip password=my-dev-pw -S

If all is well at this point, you should see something similar to:

stonith: wti_nps device OK.

If you don't, some debugging may be necessary to determine if the
config info is correct, the device is powered on, etc. The -d option can come in handy here - you can add it to any stonith command to cause it to generate debug output.

To get the list of hosts controlled by the device, use the -l option:

# stonith -t wti_nps ipaddr=my-dev-ip password=my-dev-pw -l

All of the hosts controlled by the device will be displayed one per
line. For wti_nps the output could be:

node1

node2
node3

To power off one of these hosts, use the -T option:

# stonith -t wti_nps ipaddr=my-dev-ip password=my-dev-pw -T off node

SEE ALSO

heartbeat(8), meatclient(8)

AUTHORS

Alan Robertson <alanr@unix.sh>

stonith

Simon Horman <horms@vergenet.net>

man page

Florian Haas <florian.haas@linbit.com>

man page

cluster-glue 1.0.6 December 7, 2009 STONITH(8)