zaptel_hardware(8)
NAME
zaptel_hardware - Shows Zaptel hardware devices.
SYNOPSIS
zaptel_hardware [-v][-x]
OPTIONS
- -v Verbose ouput - show spans used by each device etc. Currently only
- implemented for the Xorcom Astribank.
- -x Show disconnected Astribank unit, if any.
DESCRIPTION
Show all zaptel hardware devices. Devices are recognized according to
lists of PCI and USB IDs in Zaptel::Hardware::PCI.pm and
Zaptel::Hardware::USB.pm . For PCI it is possible to detect by subvendor and sub-product ID as well.
The first output column is the connector: a bus specific field that
shows where this device is.
The second field shows which driver should handle the device. a "-"
sign marks that the device is not yet handled by this driver. A "+"
sign means that the device is handled by the driver.
For the Xorcom Astribank (and in the future: for other Zaptel devices)
some further information is provided from the driver. Those extra lines
always begin with spaces.
Example output:
- Without drivers loaded:
- usb:001/002 xpp_usb- e4e4:1152 Astribank-multi FPGA-firmware usb:001/003 xpp_usb- e4e4:1152 Astribank-multi FPGA-firmware pci:0000:01:0b.0 wctdm- e159:0001 Wildcard TDM400P REV H
- With drivers loaded, without -v:
- usb:001/002 xpp_usb+ e4e4:1152 Astribank-multi FPGA
- firmware
- usb:001/003 xpp_usb+ e4e4:1152 Astribank-multi FPGA
- firmware
- pci:0000:01:0b.0 wctdm+ e159:0001 Wildcard TDM400P REV E/F
- With drivers loaded, with -v:
- usb:001/002 xpp_usb+ e4e4:1152 Astribank-multi FPGA
- firmware
- LABEL=[usb:123] CONNECTOR=usb-0000:00:1d.7-1
XBUS-00/XPD-00: FXS Span 2
XBUS-00/XPD-10: FXS Span 3
XBUS-00/XPD-20: FXS Span 4
XBUS-00/XPD-30: FXS Span 5 - usb:001/003 xpp_usb+ e4e4:1152 Astribank-multi FPGA
- firmware
- LABEL=[usb:4567] CONNECTOR=usb-0000:00:1d.7-4
XBUS-01/XPD-00: FXS Span 6 XPP-SYNC
XBUS-01/XPD-10: FXO Span 7
XBUS-01/XPD-20: FXO Span 8
XBUS-01/XPD-30: FXO Span 9 - pci:0000:01:0b.0 wctdm+ e159:0001 Wildcard TDM400P REV E/F