AXCALL(1)
NAME
axcall - make an AX.25, NET/ROM or Rose connection.
SYNOPSIS
For AX.25 axcall [-b l|e] [-d] [-h] [-m s|e] [-p paclen] [-r] [-t] [-v] [-w win- dow] port callsign [[via] digipeaters.....] For NET/ROM axcall [-d] [-h] [-p paclen] [-r] [-t] [-v] port callsign For Rose axcall [-d] [-h] [-r] [-t] [-v] port callsign address [[via] digi- peater]
DESCRIPTION
Axcall is the general purpose AX.25, NET/ROM and Rose connection program. As is normal in AX.25 it runs entirely in line mode. All CR/LF
translation is done transparently. The program provides ASCII, YAPP,
YAPP-C and 7+ file transfer facilities. Some of the options are only
valid in AX.25 mode, the program will quietly ignore them if given in
NET/ROM mode or in Rose mode.
This version of axcall incorporates many changes that include a much
improved user interface. The port name is mandatory and is the name of
the port which the connection will be made on. The port name may be
either an AX.25, a NET/ROM port or a Rose port, axcall will determine
which automatically.
When using NET/ROM the use of digipeaters is meaningless and is not
supported. However when using Rose up to one digipeater may be specified, as well as the Rose address of the distant node and the callsign
of the remote station. The Rose address must be ten digits long and it
must exist in the Rose node tables. For Rose connects to work axparms
must have been used to set a callsign/uid mapping for the userid in
use.
OPTIONS
- -b l|e Sets the method of backoff to use with AX.25 connections. The
- default is taken from the port specification, but can be overridden by this option. Valid values are l for linear backoff, and e for exponential backoff.
- -d Turn on socket level debugging.
- -h Selects Slave mode.
- -m s|e Sets the AX.25 mode to use. The default is taken from the
- port specification, but can be overridden by this option. Valid values are s for normal (modulus 8) AX.25 operation, or e for extended (modulus 128) AX.25 operation.
- -p paclen Specify a specific maximum amount of data to be sent in each
- AX.25 packet.
- -r Selects Raw mode.
- -t Selects Talk mode.
- -v Display the version.
- -w window Specify a specific AX.25 window for this connection. Only
- valid in AX.25 mode.
- The axcall program interprets lines beginning with a '~' specially. The following '~' escapes are available.
- ~? List escapes
- ~~ A ~ symbol
- ~. Close connection
- ~! [command] Run a command
- ~0 Change to Raw mode
- ~1 Change to Slave mode
- ~2 Change to Talk mode
- ~a Start a file transfer (Autobin)
- ~b Start a file transfer (Binary)
- ~c Close the logfile
- ~h List escapes
- ~o [filename] Open a logfile (default 'logfile.txt')
- ~r Reconnect to remote station
- ~s Stop an upload
- ~u [filename] Upload a file (ASCII upload)
- ~yu [filename] Upload a file (YAPP upload)
- ~yd [filename] Download a file (YAPP download)
- ~z Suspend program
- The program provides no terminal emulation features. These are left up to the console facilities of the terminal in use. The program is however '8 bit clean'.
FILES
/proc/net/nr_nodes
/proc/net/rose_nodes
/etc/ax25/axports
/etc/ax25/nrports
/etc/ax25/rsports
SEE ALSO
axlisten(1), mheard(1), ax25(4), netrom(4), rose(4), axports(5), nrports(5), rsports(5), axparms(8), nrparms(8), rsparms(8).
AUTHORS
- Alexander Tietzel DG6XA <TIETZE_A@etech.fh-hamburg.de>
Joerg Reuter DL1BKE <jreuter@poboxes.com>
Alan Cox GW4PTS <alan@cymru.net>
Jonathan Naylor G4KLX <g4klx@g4klx.demon.co.uk>
Steve Henson G6IXS <shenson@nyx.cs.du.edu>