gs--stp(1)
NAME
stp - Ghostscript device driver for ESC/P, ESC/P2, RTL/PCL
OPTIONS
Options for the stp driver are given in normal Ghostscript
manner. The resolution of the image calculated by
Ghostscript is not bound to the resolution of the printer
output. It is for example possible to specify -r360 to gs
and print the output in 1440x720 dpi (see below for driver
parameter). The result is a somewhat faster operation of
the driver.
The device name is "stp" (-sDEVICE=stp)
The driver will not permit use of invalid settings.
Array---------------------------------------------------------------------
Array1440x720fol 1440 x 720 DPI FOL
1440x720foluni 1440 x 720 DPI FOL Unidirectional
1440x720fourp 1440 x 720 DPI Four Pass
1440x720fourpuni 1440 x 720 DPI Four Pass Unidirectional
-----------------------------------------------------------
In addition, the Stylus Pro 7600 and 9600 printers support
the following resolutions:
Array-------------------------------------------------------------
For PCL printers (including Hewlett-Packard and Lexmark
4076):
Array----------------------------------------------------------------------------
Note: the higher resolutions of newer PCL printers using
"Photo-Ret" are not yet supported.
For Lexmark printers other than the 4076:
----------------------------------------------------------
300x600dpi 300 DPI x 600 DPI
600dpi 600 DPI
600hq 600 DPI high quality
600uni 600 DPI Unidirectional
1200dpi 1200 DPI
1200hq 1200 DPI high quality
1200hq2 1200 DPI highest quality
1200uni 1200 DPI Unidirectional
2400x1200dpi 2400 DPI x 1200 DPI (Z52)
2400x1200hq 2400 DPI x 1200 DPI high quality (Z52)
2400x1200hq2 2400 DPI x 1200 DPI highest quality (Z52)
----------------------------------------------------------
For Canon printers:
1200 DPI printers (BJC 7000, BJC 7100, BJC 8500):
------------------------------300x300dpi 300x300 DPI
300x300dmt 300x300 DPI DMT
600x600dpi 600x600 DPI
600x600dmt 600x600 DPI DMT
1200x600dpi 1200x600 DPI
1200x1200dpi 1200x1200 DPI
------------------------------
ArrayManual Manual
MultiPurpose Tray 1
Upper Tray 2
Lower Tray 3
LargeCapacity Tray 4
Portable Portable Sheet Feeder
Desktop Desktop Sheet Feeder
Tray Tray
Tray2 Tray 2
Optional Optional Source
Auto Autoselect
For Lexmark printers other than the 4076:
Array0 Grayscale
1 Color (RGB)
2 Black and white
IJS:
ArrayGrayscale: -sProcessColorModel=DeviceGray
Color (RGB): -sProcessColorModel=DeviceRGB
Color (CMYK): -sProcessColorModel=DeviceCMYK
Choose color vs. grayscale output. Color output is the
default. Choosing -dColor=0 results in only black ink (no
color ink) being used, which is faster and usually results
in the most accurate grayscale, but at the expense of
smoothness. If you want composite color (using a mixture
of color and black inks to produce gray), use -dColor=1
and -dSaturation=0.0 (see -dSaturation above).
In addition, using -dColor=0 uses luminance (perceived
brightness) of red, green, and blue to choose output lev
els. Blue of a given intensity is perceived to be much
darker than red, which in turn appears darker than green.
-dColor=1 and -dSaturation=0.0 does not use luminance.
-dColor=2 prints only black and white (thresholding).
This option always uses Fast dithering unless you specify
Very Fast.
ArrayputFD -sProcessColorModel=DeviceGray -dBitsPerSample=1 -sOutputFile=- -sIjsParams='Quality=720sw,Density=0.8' foo.ps