mibhelp(1)
NAME
mibhelp - A Table of some interesting OIDs
OVERVIEW
This File Contains a collection of interesting MIB Entries
... mrtg knows about their names ... depending on the
ASN.1 Syntax you may have to put gauge into the Options[]:
parameter.
For information about how to create a Target[]: parameter
which references these MIB entries, please consult refer
ence.
MIB LIST
- ifOperStatus
- Descriptor: ifOperStatus
Identifier: 1.3.6.1.2.1.2.2.1.8
ASN.1 Syntax: INTEGER
Enumeration: up 1, down 2, testing 3 - The current operational state of the interface. The test_
ing(3) state indicates that no operational packets can be
passed. - ifAdminStatus
Descriptor: ifAdminStatus
Identifier: 1.3.6.1.2.1.2.2.1.7
ASN.1 Syntax: INTEGER
Enumeration: up 1, down 2, testing 3- The current administrative state of the interface. The
testing(3) state indicates that no operational packets can be passed. - ifInOctets
Descriptor: ifInOctets
Identifier: 1.3.6.1.2.1.2.2.1.10
ASN.1 Syntax: Counter32- The total number of octets received on the interface,
including framing characters. - ifInUcastPkts
Descriptor: ifInUcastPkts
Identifier: 1.3.6.1.2.1.2.2.1.11
ASN.1 Syntax: Counter32- The number of subnetwork-unicast packets delivered to a
higher-layer protocol. - ifInNUcastPkts
Descriptor: ifInNUcastPkts
Identifier: 1.3.6.1.2.1.2.2.1.12
ASN.1 Syntax: Counter32- The number of non-unicast (i.e., subnetwork- broadcast or
subnetwork-multicast) packets delivered to a higher-layer
protocol. - ifInDiscards
Descriptor: ifInDiscards
Identifier: 1.3.6.1.2.1.2.2.1.13
ASN.1 Syntax: Counter32- The number of inbound packets which were chosen to be dis
carded even though no errors had been detected to prevent
their being deliverable to a higher-layer protocol. One
possible reason for discarding such a packet could be to
free up buffer space. - ifInErrors
- Descriptor: ifInErrors Identi
fier: 1.3.6.1.2.1.2.2.1.14 ASN.1 Syn
tax: Counter32 - The number of inbound packets that contained errors pre
venting them from being deliverable to a higher-layer pro
tocol. - ifInUnknownProtos
- Descriptor: ifInUnknownProtos Identi
fier: 1.3.6.1.2.1.2.2.1.15 ASN.1 Syn
tax: Counter32 - The number of packets received via the interface which
were discarded because of an unknown or unsupported proto
col. - ifOutOctets
- Descriptor: ifOutOctets Identi
fier: 1.3.6.1.2.1.2.2.1.16 ASN.1 Syn
tax: Counter32 - The total number of octets transmitted out of the inter
face, including framing characters. - ifOutUcastPkts
Descriptor: ifOutUcastPkts
Identifier: 1.3.6.1.2.1.2.2.1.17
ASN.1 Syntax: Counter32- The total number of packets that higher-level protocols
requested be transmitted to a subnetwork-unicast address,
including those that were discarded or not sent. - ifOutNUcastPkts
Descriptor: ifOutNUcastPkts
Identifier: 1.3.6.1.2.1.2.2.1.18
ASN.1 Syntax: Counter32- The total number of packets that higher-level protocols
requested be transmitted to a non- unicast (i.e., a sub
network-broadcast or subnetwork-multicast) address,
including those that were discarded or not sent. - ifOutDiscards
Descriptor: ifOutDiscards
Identifier: 1.3.6.1.2.1.2.2.1.19
ASN.1 Syntax: Counter32- The number of outbound packets which were chosen to be
discarded even though no errors had been detected to pre
vent their being transmitted. One possible reason for
discarding such a packet could be to free up buffer space. - ifOutErrors
Descriptor: ifOutErrors
Identifier: 1.3.6.1.2.1.2.2.1.20
ASN.1 Syntax: Counter32- The number of outbound packets that could not be transmit
ted because of errors. - ifOutQLen
Descriptor: ifOutQLen
Identifier: 1.3.6.1.2.1.2.2.1.21
ASN.1 Syntax: Unsigned32- The length of the output packet queue (in packets).
- frInOctets
- From: Simon Ferrett <simonf@world.net>
'frInOctets' => '1.3.6.1.2.1.10.32.2.1.9'
'frOutOctets' => '1.3.6.1.2.1.10.32.2.1.7'- which when used in the form:
frInOctets.pp.dd&frOutOctets.pp.dd:community@cisco.router- where pp is the physical port that the frame relay pvc is
defined on and dd is the DLCI of the pvc gets you the in
and out octets for just that pvc. - ifAdminHack and ifOperHack
- The return values of ifAdminStatus and ifOperStatus are
not very usefull for graphing. Use ifOperHack and ifAdmin
Hack instead. They return 1 for UP and 0 otherwise. - Note these are not real MIB entities but mrtg hacks
AUTHOR
- Tobias Oetiker <oetiker@ee.ethz.ch>