powermust(8)
NAME
- powermust - Driver for Mustek PowerMust series UPS equip
- ment
NOTE
- This man page only documents the hardware-specific fea
- tures of the powermust driver. For information about the core
- driver, see nutupsdrv(8).
SUPPORTED HARDWARE
- The powermust driver is known to work with the following
- UPSes:
Maxxtro UPS 600VA
Mustek PowerMust 400VA Plus
Mustek PowerMust 600VA Plus
Mustek PowerMust 800VA Pro
Mustek PowerMust 1000VA Plus
Mustek PowerMust 1400VA Plus
Mustek PowerMust 2000VA USB
OnLite AQUA 50
Soyntec Sekury C 500
Soyntec Sekury C 800
Square One Power QP 1000
Tecnoware Easy Power 1200
Trust UPS 1000 Management PW-4105- It is also known to work with various models from Blazer,
- Energy Sistem and Fenton Technologies. It may also work with sim
- ilar models from other manufacturers, but they haven't been test
- ed.
EXTRA ARGUMENTS
- This driver does not support any extra settings in the
- ups.conf(5).
UPS COMMANDS
This driver supports some extra commands (see upscmd(8)):
- test.battery.start
- Perform a (10 second) battery test
- shutdown.return
- Turn off the load and return when power is back
- shutdown.stayoff
- Turn off the load and remain off
- shutdown.stop
- Stop a shutdown in progress
- load.on
- Turn on the load immediately
- load.off
- Turn off the load immediately
- reset.input.minmax
- Reset minimum and maximum input voltage status
USER VARIABLES
- The behavior of the driver can be controlled by some user
- definable variables (see upsrw(8)):
- ups.delay.shutdown
- Interval to wait after shutdown with delay command
- (seconds)
- ups.delay.start
- Interval to wait before (re)starting the load (sec
- onds)
BUGS
No known bugs at the moment.
AUTHOR
Carlos Rodrigues <carlos.efr@mail.telepac.pt>
SEE ALSO
- The core driver:
- nutupsdrv(8)
- Internet resources:
- The NUT (Network UPS Tools) home page: http://www.net
- workupstools.org/
Thu January 19 2006